Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

• Adjustable to neutralize preload on sway bar (balanced handling)
• The ability to set sway bar geometry and clearance
• Low friction ball joints
• High articulation
• Direct replacement for OEM sway bar links
• Watertight boot seal
• Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.

Enhance your Mini's handling performance with Powerflex polyurethane sway bar bushings. These bushings replace OEM rubber ones, offering firmer support to effectively reduce body roll during cornering. Unlike OEM bushings, Powerflex versions provide enhanced bar retention, enabling your sway bars to function optimally, thereby boosting your driving confidence around corners. With Powerflex's expertise in polyurethane materials and precision manufacturing, these premium-quality bushings outlast OEM rubber alternatives, ensuring both longevity and an engaging driving experience. For ease of installation and extended service life, the use of Powerflex Copper Grease PCG1 is recommended.

• Firmer than factory rubber, reducing body roll
• Enhanced bar retention for optimal sway bar function
• Long-lasting performance, improving driving experience
• Powerflex offers a lifetime warranty to the original purchaser

Crafted with a mandrel-bent chromoly heavy-wall tube, the NM Eng Anti Sway Bar ensures consistent diameter for precise torsion motion. Its forged ends with two adjustment mounting holes, billet 7075-T6 aerospace-grade sway bar bracket, 90° Zerk fitting for easy re-greasing, and graphite impregnated urethane bushing ensure durability and performance. The glossy blue powder-coat finish and 3-way adjustable preload make it ideal for aggressive urban driving, canyon carving, and track/autocross use.

Please note: The NM Engineering Sway Bar Link kit is recommended for optimal performance when used with the GT Sway Bar.

• Improved body roll management
• Enhanced handling and steering input
• Ideal for aggressive urban driving, canyon carving, and track/autocross applications
• Durable construction for long-term use

Elevate MINI Cooper Countryman & Paceman with NM Engineering 22mm Rear Sway Bar

Experience go-kart-like performance in your MINI Cooper Countryman and Paceman with the NM Engineering 22mm Rear Sway Bar. Unlike competitors, NM Engineering's sway bar is meticulously crafted from a single solid piece of mandrel-bent material with forged ends. This design ensures exceptional rigidity and optimal torsion transfer throughout the straight section of the bar. The kit also includes Aluminum Billet 7075-T6 mounting brackets equipped with grease fittings for effortless maintenance.

Key Features:

• Enhanced rear roll stiffness with the 22mm rear sway bar
• One-piece, mandrel-bent construction with forged ends for superior rigidity
• Three-position adjustability for improved handling characteristics
• Powder Coated NM Blue finish for added durability

Elevate your driving experience with the NM Engineering 22mm Rear Sway Bar.

MINI R50 to R59 Performance Polyurethane Front Sway Bar Bushing Set is designed to enhance your vehicle's cornering performance. Sway bars transmit cornering forces from the outside wheels to the inside wheels, keeping the vehicle flat and reducing body roll, thus improving the driver's confidence during cornering. OEM rubber sway bar bushings are often too soft, leading to excessive movement and reduced sway bar effectiveness.

Powerflex polyurethane sway bar bushings are much firmer than factory rubber bushings, reducing body roll and ensuring the sway bars perform at their best. These bushings maintain their integrity far better than OEM versions, allowing sway bars to function at their fullest potential.

• Improved Cornering Stability: Reduces body roll and enhances driver confidence
• Durable Polyurethane Material: Firmer than OEM rubber, providing better sway bar control
• Exact Fit Standards: Manufactured to precise specifications for optimal performance
• Long-Lasting Performance: Outlasts traditional rubber bushings
• Easy Installation: Recommended use of Powerflex Copper Grease for smooth installation and longevity
• Versatile Use: Suitable for street driving and occasional track use
• Lifetime Warranty: Backed by Powerflex's lifetime warranty for original purchasers

MINI F56 Front Sway Bar - 30mm Heavy Duty Fixed is engineered to enhance handling and performance by significantly reducing body roll. This sway bar improves cornering grip by evenly distributing lateral loads across the tires, resulting in better overall vehicle stability. Designed by Whiteline, this heavy-duty sway bar offers a cost-effective solution for upgrading your MINI’s handling without compromising ride quality or comfort.

• Reduces body roll for improved cornering stability
• Increases lateral grip by evenly distributing loads across tires
• Enhances overall handling and vehicle performance
• Improves safety and reduces tire wear
• Designed to maintain ride comfort and quality
• Heavy-duty 30mm fixed design for increased durability
• Engineered by Whiteline for high performance and reliability

Transform your MINI into a go-kart-like driving experience with NM Engineering's 22mm Solid Rear Sway Bar. This sway bar not only enhances your MINI's performance but also improves its handling dynamics, offering additional rear roll stiffness and five-position adjustability. The installation of this sway bar brings about significantly improved neutral handling characteristics.

Key Features:

• Aerospace-spec 7075 CNC machined, hard anodized bushing brackets for added durability.
• Billet brackets with grease fittings for convenient bushing maintenance.
• Low resistance, graphite impregnated urethane bushings.
• Machined ends and a glossy powder-coated bar for a complete package.

Please Note: The finish of this sway bar is Powder Coated NM Blue, and it includes the newly redesigned bracket kit. Users can purchase the bracket kit separately if they choose to update the superseded version.

MINI R55 H&R Front Sway Bar Assembly 27mm enhances performance characteristics for both daily driving and track use. Designed to tighten the front suspension, this sway bar significantly improves handling and control. Constructed from high-grade steel, it offers durability and reliability for long-term performance. Upgrade your stock suspension and experience better ride quality on the front end.

• 27mm thickness for enhanced rigidity
• Non-adjustable design for simplified installation
• Improves handling and reduces body roll
• High-grade steel construction ensures durability

Upgrade your vehicle's handling and stability with H&R Sport Sway Bars, crafted from top-grade (hf) 50CrV4 steel alloy, offering unparalleled tensile strength. These sway bars ensure smooth transitional function, decreasing response time and enhancing stiffness compared to stock bars. Experience minimized body roll, improved lateral stability, and enhanced cornering grip with H&R Sport Sway Bars. Each sway bar undergoes meticulous cold-forming, heat treatment, and shot-peening processes, guaranteeing durability, resilience, and precise dimensions. Manufactured in H&R's ISO9001 certified facility in Germany, these sway bars undergo rigorous quality control checks to ensure superior performance.

Benefits:

• Crafted from high-tensile (hf) 50CrV4 steel alloy
• Improves lateral stability and cornering grip
• Reduces body roll for enhanced handling
• Precision engineering for resilience and durability
• Rigorous quality control and testing for superior performance

Enhance your Mini's performance and cornering capabilities with M7 MAXX-G Adjustable Swaybar Endlinks. Designed for both lowered and raised Minis, these endlinks offer numerous benefits including symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance. The forged and heat-treated alloy steel housings with sealed ball stud and socket design ensure durability and reliability even during aggressive driving. The adjustable length allows for precise chassis tuning and optimal grip and balance. Made in the USA, these endlinks are a must-have upgrade for any Mini enthusiast.

• Improves symmetric cornering performance
• Provides bind-free suspension travel
• Enhances suspension alignment and chassis balance
• Features forged alloy steel construction for strength and durability
• Adjustable length for precise chassis tuning
• Easy to install and adjust with simple hand tools

Upgrade your Mini's suspension with M7 MAXX-G Adjustable Swaybar Endlinks for optimal performance on the road or track.

MINI R56 27mm H&R Front Sway Bar Assembly is designed to enhance your MINI's performance both on the street and the track. This sway bar improves handling and control by tightening up the front suspension, providing a more responsive driving experience.

• Enhanced Handling: Improves front suspension stability for better control.
• Track-Ready Performance: Ideal for daily driving and track use, offering superior responsiveness.
• High-Quality Construction: Made from high-grade steel for long-lasting durability.
• 27mm Thickness: Provides the perfect balance between stiffness and flexibility.
• Non-Adjustable Design: Engineered for optimal performance without the need for adjustments.