BMW Tools & Specialty Equipment for MINI

Durable Impact sockets for hard to remove fasteners safely.

Features:

• Brawny ½-inch drive 27mm 12-point socket
• Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
• Accommodating 53mm depth to accommodate many applications and different length shafts.
• Made of durable chrome moly steel, this socket is tough enough to get the job done.

Simplify can storage and transport with AGA Magnetic Can Holders. These holders attach securely to metal surfaces with strong magnets and come in both large (62mm) and small (45mm) sizes. Perfect for service shops or home projects, they help keep your workspace organized and efficient.

Key Features

• Fits Larger Cans: 62mm diameter to fit silicone cans, lubricant cans, etc.
• Color-Coded Clips: Set includes five clips in different colors
• Strong Magnetic Hold: Ensures secure attachment to metal surfaces
• Portable and Versatile: Ideal for DIYers and professionals

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

If you have a situation where no amount of positioning or floor jack extensions seem to work to lift your vehicle, you may just finally need that specialty jack. This AC Hydraulic Single-Stage Air Hydraulic Jack for high clearance applications is a top of the line, straight lift design floor jack that is both extremely durable and extremely reliable. Plus, unlike traditional jacks, there is no lifting arm that may come in contact with any part of the the vehicles body or other components that would result in damage. With a lift height of up to 24.06 inches, or up to 33.9 inches with an F250 extension, this air hydraulic jack is perfect for high lift, tight clearance needs.

Features:

• Minimum height of 14.21 in
• Maximum height of 24.06 in, the F250 (optional) extension offers a total extended height of 33.90 in
• Hard chromium plated piston rod for long life
• Built-in safety overload valve
• Hand-operated dead-man’s control for optimum safety whilst lifting and lowering
• Ergonomic handle with push buttons
• With 2 extensions (1.97/3.94 in)

Specifications:

• Capacity:  55000 lb 
• Min. height:  14.21 in 
• Max. height:  24.06 in 
• Frame length:  32.17 in 
• Handle length:  45.67 in 
• Width:  9.06 in 
• Width (with wheels):  12.28 in 
• Air supply:  9 - 12 bar 
• Air consumption:  350 l/min
• Weight:  157lbs

Engineered for optimal comfort and ease of movement, this reclining creeper seat is ideal for anyone working under vehicles. Its gas spring-supported backrest offers adjustable reclining from 0° to 70°, with seat angles shifting in 10° increments up to 30°, delivering superior ergonomics for mechanics and hobbyists alike.

Equipped with six 360° swivel casters, this creeper seat glides effortlessly around the workspace, allowing you to move smoothly without constantly adjusting your position, helping you stay focused on the job.

Constructed from heavy-duty materials, the seat is upholstered with non-slip, marine-grade vinyl, resistant to abrasion, chemicals, and oil. This durable design provides long-lasting comfort and is the perfect addition to your garage setup.

Features:

• TPR wheels feature a shock absorbing cushioned ride, while providing good floor protection and quiet rolling operation
• TPR wheels are resistant to chemicals, acids, alcohol, and water
• Wide, large diameter wheel improves rolling over rough surfaces
• Heavy-duty non-slip textured marine grade vinyl
• Comfortable thick-padded seat and backrest
• Locking casters
• Seat is resistant to abrasion, chemical, and oil

Specifications:

• Length (Backrest Up): 33 in. / 840 mm
• Length (Backrest Down): 45.25 in. / 1,150 mm
• Width (Frame): 17 in. / 430 mm
• Width Overall: 20.75 in. / 530 mm
• Seat Height (Down): 6.25 in. / 161 mm
• Backrest Height (Up): 31.5 in. / 800 mm
• Seat/Backrest Width: 14.75 in. / 376 mm
• Ground Clearance: ≈3 in. / 76 mm
• Seat Angle Min. / Max.: ≈0° to 30°
• Maximum Load: 600 lbs. / 272 kg.
• Backrest Angle Adjustment: Gas spring
• Seat Angle Adjustment: Mechanical Lock — 3 positions
• Casters: Six 360° Casters, ø2.5 in x .75 in., sleeve bearings, oil resistant, non-marring rubber wheels.
• Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine Vinyl is abrasion, chemical and oil resistant.
• Frame Materials: Full powder coated, welded steel square tube
• Weight: 41.25 lbs. / 19 kg.
• Backrest Angle Min. / Max.: ≈0° to 70°

Includes:

• 2" Extension
• 3" Extension
• 4" Extension
• 6" Extension
• 14" Extension

The Hand Hydraulic Junior Press is a versatile and efficient solution for passenger car workshops and light industrial applications. Its compact design and innovative features make it an essential addition for precision pressing tasks.

Features:

• Efficient Operation: Foot-operated pneumatic control ensures high-speed, precise ram movement for seamless approach to the workpiece.
• Versatile Ram Design: A traversing ram with a removable end cap allows for the easy mounting of various piston heads to suit specific applications.
• Durable Vee Blocks: Includes two vee blocks for added support and stability during pressing operations.

Specifications:

• Capacity: 35,000 lb
• Stroke: 5.91 in
• Height: 63.78 in
• Width: 34.84 in
• Width between legs: 25.20 in
• Depth between legs: 5.12 in
• Clearance: 4.13-30.71 in
• Weight: 287 lb