Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions*** 

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Enhance your driving experience with ECS Tuning's Performance Polyurethane Differential Bushings. These meticulously engineered bushings offer a direct connection between your right foot, the engine, and the chassis, making them an essential upgrade.

• Say goodbye to the softness of factory rubber differential bushings that absorb vibrations and reduce performance.
• ECS Tuning's polyurethane bushings eliminate the deflection found in factory rubber bushings, resulting in improved power transfer from the differential to the wheels.
• Experience enhanced throttle control, whether you're navigating a challenging canyon road, drag racing, or simply commuting.

Unlike delrin or solid differential mounts, these bushings deliver improved performance without introducing harshness or excessive vibration.

Crafted from durable 88A durometer polyurethane and enhanced with a black anodized 6061-T6 aluminum sleeve.

Resistant to chemicals, ozone degradation, road salt, and general wear and tear, ensuring a longer service life.

Protect Your Wheels with ECS Tuning Wheel Lock Sets

Safeguard your valuable wheels with ECS Tuning Wheel Lock sets, providing an extra layer of protection against theft without requiring expensive alterations. Bid farewell to concerns about wheel security, especially after investing significant time in searching for the ideal wheels or painstakingly polishing each mesh spoke.

These wheel locks effectively replace one of your wheel bolts, ensuring heightened security and peace of mind. Each kit includes a special socket tool for convenient removal. With a factory bolt length of 38mm and a conical seat design, these locks are compatible with most aftermarket wheels. However, exercise caution and avoid overtightening or using air tools. Also, note that lock keys are specifically oriented to fit bolts in a single, precise position.

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a high-quality brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new DD23 "Daily Driver" brake pad! This enthusiast-developed pad offers confident stopping power, very low dust, quiet braking, and a positive initial bite. The perfect choice for your daily-driven Euro!

If you find yourself “pumping the brakes” over the brake pad selection process for your daily driver, your answer is this DD23 pad. This is the one!

As a team of enthusiasts who own all types of European cars, we have the advantage of the exposure that comes with the enthusiast lifestyle - and have a strong understanding of what makes a great brake pad. In the pursuit of a really great brake pad for daily driving, we’ve tested a wide range of brake pads. After thousands of test miles, iterating through a variety of pad compounds, we’ve landed on the ideal blend for our DD23 Daily Driver ceramic pad.

Features:

Good stopping power - Brake pads need to stop your car, period, so this is key. We focused on selecting a compound that offers a healthy level of friction (both when hot and when cold) for safe, positive stopping power.

Positive initial bite - You should feel your brakes engage as you press the pedal, but it should not feel like an on/off switch! Advanced ceramic composition means you’ll enjoy a smooth transition on and off of the brake pedal, meaning your passengers will have a comfortable ride in stop-and-go traffic. We’ve hit a good balance here.

Very low-dust - Some factory-installed pads are eye-poppingly dusty, which is a no-go for us. Thanks to the composition of this ceramic pad, which is copper-free and contains a negligible amount of other metals, dust is both lighter in color and very limited in amount. We’ve improved on the “dust factor” without sacrificing on bite and stopping power as a good compromise, which will be a win for anyone who doesn’t detail daily (or anyone who does, too!)

Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. Extremely low metallic composition means they will not squeal. DD23 is comfortable and quiet - both on the ears and in lack of vibration transmitted through the cabin.

Long life - This should be an obvious one. Your daily driver pads should last and last, so that was key in selecting our ideal compound. This is another benefit to having ceramic material composition versus a softer organic pad (which have higher metallic and various organic elements) and wear much faster. Ours are kind to rotors, too (no accelerated wear characteristics) for many miles of motoring.

Upgrade the wheel hardware of your BMW with the BMW Titanium Conical Seat Wheel Bolt - 12x1.5x35mm - Set Of 20. This comprehensive set of titanium wheel bolts is designed to enhance both the aesthetics and performance of your BMW. Engineered specifically for BMW models, these conical seat wheel bolts offer superior strength and durability compared to traditional steel bolts. Elevate the style and functionality of your BMW with this premium titanium wheel bolt set.

• Enhances the aesthetics and performance of your BMW
• Superior strength and durability compared to traditional steel bolts
• Engineered specifically for BMW models
• Set of 20 bolts ensures complete wheel installation

Modern emission regulations require a closed PCV/Breather system for cleaner operation. However, inefficient oil particle capture can lead to excessive oil vapor ingestion, causing carbon buildup, reduced performance, and fuel economy. ECS Tuning's updated ECS Baffled Oil Catch Can, now with an easy-to-empty 1/4" drain fitting, is engineered to collect toxic blow-by gases, minimize carbon deposits, and reduce oil contamination within engine oil. Recirculating oil vapor ensures emissions compliance without venting to the atmosphere.

• Key Features:
• Highly Efficient Oil Separator: Strategically positioned 4 chamber baffle system maximizes oil/air separation and minimizes oil droplets in the intake tract.
• Integrated Dipstick: Knurled and black anodized oil dipstick simplifies oil volume inspection.
• Reservoir: Available in 6oz or 8oz capacity with a 1/4" NPT drain plug fitting.
• Serviceable: Easily removable baffle plates and drain plug for cleaning.
• Easy/Customizable Installation: Combine with the ECS Universal Bracket Kit for simplified installation and adjustable mounting locations.
• Leak-Free Fittings: Machined -10AN ORB (O-Ring Boss) fittings available for secure connections (fittings sold separately).

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems