BMW Wheels - Genuine & Performance for BMW X Series F25 (2011+)

Vorsteiner Sport Forged wheels are built to provide the ultimate in low weight, strength, and strikingly good looks! These wheels are made using the latest T-6061 aerospace grade aluminum blocks and individually machined to your exacting standards.

The new Vorsteiner V-FS 001 add an another great contender to the lineup of top of the line wheels brought to us by Vorsteiner. They feature a milled split spoke design with a cut-out channel in the middle. In the center are recessed bolt holes and center cap that add another layer of depth to the wheels. Between the split spokes are supports of aluminum that have 3 individual holes cut out, both to save weight and add style to these already aggressive looking wheels.

Vorsteiner have pre-built these wheel kits specifically to fit certain intended vehicles. This kit is for the F3X 3 Series and F25 X3's and features:

• 19x8.5" ET30 front wheels
• 19x10" ET45  rear wheels
• 72.56mm Center Bore
• 5x120 Bolt Pattern
• Brushed Aluminum Finish

Fits the following BMW's:
2012+ F30/1/4 BMW 3 Series
2010+ F25 BMW X3

Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

Flow Forged wheels by Vorsteiner are built for style, strength, and reduced weight. This performance oriented wheel group is perfect for both road or track applications thanks to its light and strong aluminum build and precision formation.

• 60MM, 75MM, 82MM, OR 90MM OVERALL LENGTH
• EASY INSTALL WITH ALLEN SOCKET
• CERTIFIED ISO/TS 16949 AND ISO 9001 BY TUV
• MANUFACTURED IN EUROPE
• BLACK M-PHOSPHATE COATING
• CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
• STUD FOR MIXED STREET/TRACK USE

• Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
  
  Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
  
  Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.
   Turner Bullet Nose Wheel Stud Features:

• Black phosphorous corrosion resistant coating
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Long shank for good brake rotor alignment
• Heat-treated aircraft quality alloy steel
• Installation Instructions
  Click here for installation instructions and more information.
  
  
  
  Sold per stud.

12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only

12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)

2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only

13mm = .51"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 13mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

Longer wheel bolts are required.
 

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe