BMW Engine Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Supertech - Corporate Logo
T#:11760
Part#: TMS11760
Ships in 9 Business Days
$ 1,038.99 USD
Free Shipping
$ 1,038.99 USD
Free Shipping
For BMW's with S54 engines, these valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for high performance and durability at high rpms, with better memory. These are extremely high quality, offered at the best price.

Computer designed to ensure that the wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme racing conditions. Computer software allows Supertech to make sure that the harmonics are well under control.

The retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
NOCO - Corporate Logo
T#:855029
Part#: GEN5X3
Ships in 9 Business Days
20% off MSRP $ 249.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.94 USD
Free Shipping
20% off MSRP
$ 249.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.94 USD
Free Shipping

The GEN5X3 is an upgraded version of NOCO's GENM3 with improved features. This model is 37% smaller yet delivers 43% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a three-bank onboard battery charger with a 15-amp rating (5 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.


Features: 

  • A three-bank on-board battery charger rated at 15-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
  • Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.
  • An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
  • Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
  • Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
  • It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
  • A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
  • A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Genuine European BMW - Corporate Logo
T#:31082
Part#: 11121405748
Special Order: No Guaranteed ETA
16% off MSRP $ 276.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 232.99 USD
Free Shipping
16% off MSRP
$ 276.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 232.99 USD
Free Shipping


Genuine BMW Cylinder Head Gasket Asbestos-Free - 1.74mm


VAC Harmonic SuperDamper By ATI - M50/S50/M52/S52
For use only with OBD1 engine management systems. For use only with OBD1 engine management systems. Will not work with S50B30 & S50B32 Eu...
ATI Performance Products - Corporate Logo
T#:639877
Part#: VAC-HPCD-M50-TR
Ships on Oct 14, 2026
$ 1,139.99 USD
Free Shipping
$ 1,139.99 USD
Free Shipping
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3 as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Kit includes: Damper Lightweight VAC Billet Crankshaft Pulley Mounting and Installation Hardware Trigger Ring for OBD1 systems Note: Will NOT work with S50B30 & S50B32 Euro Engines, For Street/Track cars with Air Conditioning, the Additional A/C Pulley Option is REQUIRED as the OE A/C pulley is not compatible. The additional mounting and installation hardware is also included. Made in the USA
Show More Show Less

Bremi - Corporate Logo
T#:369620
Part#: 12121247523
Ships on Oct 14, 2026
$ 176.99 USD
Free Shipping
$ 176.99 USD
Free Shipping
Replace worn wires and restore performance.
K&P Engineering - Corporate Logo
T#:402537
Part#: S37
Back Ordered
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
1991 - 1999 E36 Coupe 323i 325is 328i
1993 - 1999 E36 Convertible 323i 325i 328i
1990 - 1999 E36 Sedan 325i 328i 
1989 - 1995 E34 525i, 530i, 
1998 - 2004 E39 Touring 525i 528i 
1996 - 2004 E39 Sedan 525i 528i 530i 
1999 - 2001 E46 Convertible 323ci 325ci 330ci
2002-2006 E46 Convertible 325ci 330ci
1998 - 2001 E46 323ci 325ci 330ci M3
2002 - 2006 E46 325ci 330ci
1998 - 2001 E46 Touring 323i 325i
2002 - 2006 E46 Touring 325i 325xi
1998 - 2001 E46 Sedan 323i 325i 328i 330i
2002 - 2006 E46 Sedan 325i 325xi 330i 330xi
2000 - 2006 E53 X5 SUV X5 X5 3.0i 

 

 

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:57230
Part#: 32321095826
Special Order: No Guaranteed ETA
2% off MSRP $ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 217.99 USD
Free Shipping
2% off MSRP
$ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 217.99 USD
Free Shipping


Genuine BMW Interlock Steering Lock -
This item fits the following BMW Chassis:
E36

CTA Tools - Corporate Logo
T#:586216
Part#: CTA2885
Ships on Oct 14, 2026
$ 121.87 USD
Free Shipping
$ 121.87 USD
Free Shipping
This is the proper tool for locking the camshafts in place at TDC when servicing the timing system.

TurboSmart - Corporate Logo
T#:4921469
Part#: TS-0551-1012
Ships on Oct 14, 2026
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Show More Show Less

Rally Road - Corporate Logo
T#:401511
Part#: RROCCK
Ships on Oct 13, 2026
Starting at $ 243.99 USD
Free Shipping
Starting at $ 243.99 USD
Free Shipping

Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.

This oil cooler system is race tested and proven to outflow the euro M3 oil filter housing. Additionally, this particular system uses a sealing mechanism to direct the oil flow through the cooler lines and then through the oil filter.  Other cooler caps do not provide this seal and therefore the external oil coolers and lines act as a "balloon".  The lines and cooler are pressurized, but oil does not flow through them.  Flowing oil means it is being cooled and not just acting as an external reservoir.

Flow testing reveals that the oil cooler cap will outflow the Euro M3 Oil Filter Housing by more than 80% at the same, pressure, RPM, and oil temperature. In the upper RPM range, there is nearly a 100% improvement in flow from the RallyRoad oil cooler cap when compared to the Euro M3 oil filter housing.  This is a massive improvement over OE and is a worthwhile upgrade, especially in engines that see severe duty.

Features:

  • -8AN o-ring ports to provide a leak free fitting without the use of Teflon tape or sealant used by other oil cooler caps.
  • Viton o-rings are used throughout to maintain function and sealing in a high-temperature oil environment.
  • Use of the stock filter cap bolt to reduce cost and simplify installation.
  • An internal sealing mechanism to direct oil flow through the oil cooler and through the filter.
  • 1/8" NPT side port for external oil pressure gauge.

Kit Includes:

  • Oil filter cap with fittings
  • Oil filter sealing ring
  • BMW MANN Oil Filter and gasket

This part fits the following BMWs
1992-1999 E36 323i 325i 325is 328i 328is

Show More Show Less
Gates - Corporate Logo
T#:592637
Part#: 64118375443
Ships on Oct 16, 2026
$ 257.99 USD
Free Shipping
$ 257.99 USD
Free Shipping
Signs of no heat or the heat won't shut off
Genuine BMW - Corporate Logo
T#:19400
Part#: 13531707404
Special Order: No Guaranteed ETA
2% off MSRP $ 165.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 161.99 USD
Free Shipping
2% off MSRP
$ 165.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 161.99 USD
Free Shipping


Genuine BMW Cover -
This item fits the following BMW Chassis:
E46,E83 X3

Fits BMW Engines including:
M52,M54



AMC - Corporate Logo
T#:383388
Part#: 11121703637
Special Order: No Guaranteed ETA
$ 1,631.99 USD
Free Shipping
$ 1,631.99 USD
Free Shipping
Bare head with guides and seats only
Bosch - Corporate Logo
T#:359520
Part#: AL0738XKITKT
Ships on Oct 22, 2026
$ 307.00 USD
Free Shipping
$ 307.00 USD
Free Shipping

If your car has died on the side of the road from a dead battery and you notice flickering or low powered head lights, it's likely your alternator failing. To be sure you are getting a high quality part with a long life-span, choose this OEM Bosch Alternator. This is an OEM replacement for BMW part # 12311432980 and 12317501690.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


A refundable core charge must be applied to this alternator. Upon receipt of your rebuildable alternator core, you will be refunded the core charge. 

This Bosch Alternator fits the following BMWs:
1997-2000 E39 5 Series 528i
2000 E46 3 Series 323i 323ci 328i 328ci
1997-2000 Z3 Roadster Z3 2.3 Z3 2.8

Show More Show Less
Bosch - Corporate Logo
T#:338004
Part#: 12411712937
Ships on Oct 21, 2026
Starting at $ 284.00 USD
Free Shipping
Starting at $ 284.00 USD
Free Shipping
E36/E46/M50/M52/M54 STARTER - THIS ONE IS THE "LATER" STYLE THAT DOES NOT REQUIRE NUTS. A refundable core charge will be added to your sale, refunded to you when we get your old starter back. Replaces Bosch part number SR0445X.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products.​

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2958763
Part#: 930286125T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2958765
Part#: 930286135T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Achieve enhanced performance and reliability for your BMW S54 engine with the MAHLE Motorsports PowerPak Piston Kit. This kit replaces the factory cast aluminum pistons with robust forged pistons, offering superior strength and durability. MAHLE forged pistons are engineered to withstand extreme heat, detonation, and pressure, making them ideal for high-performance engines. MAHLE Motorsport's PowerPak and PowerPak+ piston kits ensure exceptional reliability and performance, elevating your BMW engine build to new heights. The range includes BMW piston sets in 2618, 4032, and M142 alloys, catering to N54, S54, and Mini Cooper models. These piston sets come complete with pins, clips, and rings, designed for both motorsport applications and those seeking to enhance daily driver performance. Notably, the latest addition is the B58 3.0L, featured in the 2020 Toyota Supra. Drawing on over 95 years of performance expertise and employing MAHLE-manufactured machinery for unique features, MAHLE Motorsport ensures uncompromising quality.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2929013
Part#: 930024709T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping

Mahle Motorsports - Corporate Logo
T#:2928979
Part#: 197843112T
Special Order: No Guaranteed ETA
$ 1,103.99 USD
Free Shipping
$ 1,103.99 USD
Free Shipping
Forged 4032. Get the performance and reliability your M54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2929010
Part#: 930024409T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S52 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2929005
Part#: 930000135T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2929008
Part#: 930000145T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2929006
Part#: 930000135
Special Order: No Guaranteed ETA
$ 1,085.99 USD
Free Shipping
$ 1,085.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2929004
Part#: 930000045T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your S54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less


Cat Cams - Corporate Logo
T#:578599
Part#: 1301712
Special Order: No Guaranteed ETA
$ 1,170.00 USD
Free Shipping
$ 1,170.00 USD
Free Shipping
Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.
Cat Cams - Corporate Logo
T#:5858417
Part#: 1304213
Special Order: No Guaranteed ETA
$ 1,524.99 USD
Free Shipping
$ 1,524.99 USD
Free Shipping
Upgrade your M52B28 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Sport cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the valve timing: M52 /B28: from 115° to 90° (exhaust: 105° fix) The data are shown for full intake retard (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! Duration Intake @ .1mm: 257° Exhaust @ .1mm: 257° Intake @ 1mm: 220° Exhaust @ 1mm: 220° Lift Intake: 10.15mm Exhaust: 10.15mm Lobe Angle Intake: 110° Exhaust: 105°
Show More Show Less
M5X Dual Vanos Rebuild Kit - E39, E46, E60, E83, Z3, Z4
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:394319
Part#: 012017ECS
In Stock
Sale - Save 10% $ 570.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 511.76 USD
Free Shipping
Sale - Save 10%
$ 570.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 511.76 USD
Free Shipping

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

While you 're replacing the seals in your Vanos unit it a good time to install anti-rattle spacers to tighten up the gaps in your stock assembly and get rid of that noisy Vanos clatter.

Rebuild instructions : http://bd8ba3c866c8cbc330ab-7b26c6f3e01bf511d4da3315c66902d6.r6.cf1.rackcdn.com/PDF_12017_BMW_M5X_Dual_Vanos_Rebuild_Kits.pdf

This item fits the following BMWs: 

1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi 
1999-2003 E39 BMW 525i 528i 530i 
2004-2010 E60 BMW 525i 530i 
2004-2006 E83 BMW X3 2.5i X3 3.0i 
2000-2006 E53 BMW X5 3.0i 
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i 

Show More Show Less

Schrick - Corporate Logo
T#:359938
Part#: 086311700KT
Ships on Jan 18, 2027
$ 833.52 USD
Free Shipping
$ 833.52 USD
Free Shipping
One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.
Show More Show Less

Schrick - Corporate Logo
T#:11748
Part#: TMS11748
Ships on Dec 18, 2026
$ 1,867.99 USD
Free Shipping
$ 1,867.99 USD
Free Shipping
E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:200185
Part#: TMS200185
Ships on Jan 18, 2027
$ 3,340.69 USD
Free Shipping
$ 3,340.69 USD
Free Shipping
As Used on Project E46 330
Schrick  272   degree (10.9mm lift) intake and  256   degree (10.4mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less

Schrick - Corporate Logo
T#:3855
Part#: E46M3SCHRICK
Ships on Dec 18, 2026
$ 2,692.99 USD
Free Shipping
$ 2,692.99 USD
Free Shipping

SEE T#338745 BMW S54 3.2L Schrick Camshaft Set 280/272 12.5mm Lift is the perfect performance upgrade for enthusiasts seeking to enhance their engine's capabilities. With over 40 years of experience, Schrick is dedicated to producing high-quality camshafts that deliver exceptional power and reliability. Designed for both street and track applications, these camshafts offer an impressive balance of performance and drivability. The intake cam features a duration of 280, while the exhaust cam has a duration of 272, with a valve lift of 12.5mm. These new "cast" cams from Schrick closely resemble the stock E46 M3 CSL cams, ensuring a smooth idle and a significant increase in horsepower throughout the RPM range. With a peak gain of 15 horsepower and no loss in low-end torque, these camshafts are a top choice for BMW enthusiasts.

Key Benefits:

  • Enhanced Power: Delivers a peak gain of 15 horsepower.
  • Smooth Idle: Maintains a factory-like idle quality for everyday driving.
  • Linear Power Increase: Provides a steady increase in horsepower from midrange to redline.
  • Compatibility: Designed to fit the BMW S54 engine with new rocker arms required.
  • High-Quality Construction: Crafted from top materials for strength and durability.
Show More Show Less
Schrick - Corporate Logo
T#:637317
Part#: 0261A1561-02
Special Order: No Guaranteed ETA
$ 1,619.99 USD
Free Shipping
$ 1,619.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M52 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 256 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - Cam Lobe Lift Exhaust - Valve Lift w/o Valve Clearance Exhaust - Valve Clearance Exhaust -
Show More Show Less

Schrick - Corporate Logo
T#:3859
Part#: TMS3859
Ships on Dec 18, 2026
$ 2,799.99 USD
Free Shipping
$ 2,799.99 USD
Free Shipping

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

 

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick - Corporate Logo
T#:21521
Part#: TMS21521
Ships on Jan 18, 2027
$ 3,470.66 USD
Free Shipping
$ 3,470.66 USD
Free Shipping
These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:338215
Part#: TMS11749
Ships on Dec 18, 2026
Sale - Save 15% $ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD
Free Shipping
Sale - Save 15%
$ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD
Free Shipping
E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:338745
Part#: E46M3SCHRICK
Ships on Dec 18, 2026
Starting at $ 2,692.99 USD
Free Shipping
Starting at $ 2,692.99 USD
Free Shipping
Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These proved to be an excellent upgrade on our first Project E46 M3 and very similar to the stock E46 M3 CSL cams. Smooth as stock idle with a linear increase in horsepower from midrange all the way to redline. Peak gain was 15hp with no loss in low end torque. The duration of the intake cam is 280 and the exhaust is 272 with 12.5mm valve lift. These are the new "cast" cams from Schrick which require new rocker arms (Schrick or BMW part #11337833859). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less


Schrick - Corporate Logo
T#:300487
Part#: 261.E1.641-V2C
Ships on Dec 18, 2026
$ 1,398.99 USD
Free Shipping
$ 1,398.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 264 Duration Intake @ 1mm - 227 Intake Peak Timing - Cam Lobe Lift Intake - Valve Lift w/o Valve Clearance Intake - Valve Clearance Intake -
Show More Show Less
Schrick - Corporate Logo
T#:340423
Part#: TMS201497
Ships on Dec 18, 2026
Starting at $ 3,551.99 USD
Free Shipping
Starting at $ 3,551.99 USD
Free Shipping
Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start but will be smooth once at operating temperature. This set is just a great all-around cam upgrade for the S54!

These Schrick cams were initially developed for the M3 CSL but they also work great on the US and other non-CSL S54 engines as well. With more duration they are a great match to high flow headers, no cats, or CSL intake manifold upgrades. These are the new "cast" cams from Schrick which require new rocker arms (Schrick recommended or BMW part #11337833259). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:11749
Part#: TMS11749
Ships on Dec 18, 2026
$ 824.99 USD
Free Shipping
$ 824.99 USD
Free Shipping
E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Schrick - Corporate Logo
T#:338218
Part#: 0415A1960-00
Back Ordered
Starting at $ 829.00 USD
Free Shipping
Starting at $ 829.00 USD
Free Shipping
E46 M3 Schrick 296 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more aggressive than either of the "standard" Schrick exhaust cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Schrick - Corporate Logo
T#:201497
Part#: TMS201497
Ships on Dec 18, 2026
$ 3,551.99 USD
Free Shipping
$ 3,551.99 USD
Free Shipping

Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start but will be smooth once at operating temperature. This set is just a great all-around cam upgrade for the S54!

These Schrick cams were initially developed for the M3 CSL but they also work great on the US and other non-CSL S54 engines as well. With more duration they are a great match to high flow headers, no cats, or CSL intake manifold upgrades. These are the new "cast" cams from Schrick which require new rocker arms (Schrick recommended or BMW part #11337833259). Professional installation is a must due to the intricacies with the double VAN0S.

Schrick Technical Information / Specs

This item fits the following BMWs:

  • 2001-2006 E46 BMW M3
  • 2001-2002 Z3 BMW M Roadster M Coupe
  • 2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:4048
Part#: E46-M54-SCHRICK
Ships on Jan 18, 2027
$ 2,915.38 USD
Free Shipping
$ 2,915.38 USD
Free Shipping
As Used on Project E46 330
Schrick  264   degree (10.5mm lift) intake and  248   degree (10mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. As used in our 330i ZHP Project Car! These are also available for track / race applications in 272 intake and 256 exhaust durations. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less

Schrick - Corporate Logo
T#:589750
Part#: 0284E1840-0V2
Special Order: No Guaranteed ETA
$ 1,596.99 USD
Free Shipping
$ 1,596.99 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 129 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0, 25
Show More Show Less
Billet Aluminum Oil Dipstick - Silver - S54 3.2L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:384352
Part#: 009422ECS01-03
Ships on Feb 15, 2027
Sale - Save 25% $ 96.99

This product was last offered at the strikethrough price on
06-13-2026

$ 72.74 USD
Free Shipping
Sale - Save 25%
$ 96.99

This product was last offered at the strikethrough price on
06-13-2026

$ 72.74 USD
Free Shipping

ECS Tuning introduces the solution to your engine bay aesthetic concerns with the Billet Aluminum Oil Dipstick. Say goodbye to the bright red plastic eyesore and elevate your under-the-hood style effortlessly. Designed to OE specifications, this dipstick boasts an easy-to-read fill line and is available in three stunning finishes: black, polished, or clear anodized.

  • Billet aluminum construction for enhanced durability
  • Easy-to-read fill line for convenient oil level checks
  • Available in three finishes: black, polished, or clear anodized
  • OE specifications ensure a perfect fit
  • Improved ease of insertion compared to factory ribbon dipstick
  • Aesthetic enhancement for your engine bay

Upgrade your engine bay's appearance and functionality with the ECS Tuning Billet Aluminum Oil Dipstick. No more struggles reinstalling your dipstick; enjoy a sleek and high-performing addition to your vehicle.

Show More Show Less

Genuine BMW - Corporate Logo
T#:361295
Part#: 12137599219
Special Order: No Guaranteed ETA
$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping

Mahle Motorsports - Corporate Logo
T#:2928980
Part#: 197843112
Back Ordered
$ 1,004.99 USD
Free Shipping
$ 1,004.99 USD
Free Shipping
Forged 4032. Get the performance and reliability your M54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
NOCO - Corporate Logo
T#:641114
Part#: GB500
Back Ordered
20% off MSRP $ 2,499.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,999.99 USD
Free Shipping
20% off MSRP
$ 2,499.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,999.99 USD
Free Shipping

The GB500+ is a powerful portable lithium jump starter delivering 6250 amps, designed to jump-start gasoline and diesel engines up to 45 liters. Its versatility extends to a wide range of vehicles and equipment, including semi-trucks up to class 8, motorhomes, coaches, buses, as well as mining, agricultural, construction, and vocational equipment with 6, 8, 12, and 16 cylinders, and beyond.


Features:

  • Introducing one of the most powerful lithium jump starters yet. Designed for the largest, most challenging engine starts ever. With over 6250-amps of starting power, it can jump start gasoline and diesel engines up to 45-liters.
  • Safe and easy to use battery jump starter pack without the worry of incorrect connections or sparks. Safely connect to any 12-volt and 24-volt battery with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
  • It's commercial in every way. It jump starts almost every type of vehicle and equipment, including semi-trucks (up to class 8), motorhomes, coaches, buses, mining, agricultural, construction, and vocational equipment - 6, 8, 12, and 16 cylinder - and more. Plus, an integrated digital battery voltmeter for enhanced diagnostics.
  • Jump starters this powerful typically are enormous and weigh hundreds of pounds, but our high discharge lithium technology makes it the most compact and lightweight design in the world - weighing a mere 24-pounds. And its portable carrying case makes jump starting more convenient than ever.
  • It's not just a lithium jump starter but also a portable power bank for recharging smartphones, tablets, and other USB devices, with an ultra-bright 2,200-lumen LED flashlight with seven light modes, including emergency strobe and SOS.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bosch Leak Diagnosis Pump - E39, E46, Z3
For vehicles with production date up to 09/2001
Bosch - Corporate Logo
T#:377059
Part#: 16136756440
Back Ordered
$ 221.99

This product was last offered at the strikethrough price on
05-07-2026

$ 202.11 USD
Free Shipping
$ 202.11 USD
Free Shipping
Located under the vehicle, near the transmission bellhousing or in the rear.


Genuine BMW - Corporate Logo
T#:13118
Part#: 13531404089
Back Ordered
6% off MSRP $ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD
Free Shipping
6% off MSRP
$ 243.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 229.99 USD
Free Shipping
This stock replacement fuel pressure regulator.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2001-2006 E46 BMW M3
1999-2003 E39 BMW M5
2001-2002 Z3 BMW M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster
Show More Show Less
Valeo - Corporate Logo
T#:371896
Part#: 12317501599
Ships on Oct 21, 2026
$ 323.99 USD
Free Shipping
$ 323.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less