Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

Forgeline Custom Forged Alloy Wheels

Forgeline Custom Forged Alloy Wheels For over twenty years, Forgeline has been producing premium forged aluminum wheels for street, show, and track. Forgeline's commitment to quality, engineering, style, and function have won them fans around the world and you can find Forgeline Wheels on BMW, Porsche, Ferrari, Corvette, muscle car, and any other vehicle where perfection is required. Forgeline Wheels are available as one-piece monoblock or multi-piece modular designs in many styles. Because each wheel is custom ordered, any combination of paint, powder coat, polish, or chrome can be used. Forgeline uses advanced manufacturing and finishing methods to achieve the quality that other wheel manufacturers can only dream of. For wheel information in general, check out our Wheel Tech Guide by clicking here.

We will not be beat on Forgeline pricing! Call or e-mail us for our best pricing!

CF3C DE3C GA1R MS3C RB3C SE1 LS3Below you will find Forgeline Wheels for BMW models but we also welcome inquiries on other makes as well. This is only a partial listing of available Forgeline wheels. For a wheel design or finish not listed here, call or e-mail us.

For accurate results, specify your model below.
F8X M3/M4, F87 M2 Forgeline GS1R 18x10 Square Race/Track Wheel Set

Ultra light and strong! If you're taking your F80 M3/F82 M4 to the track you know how important good rubber is. Getting as much rubber to the pavement is key for putting the torque to the pavement and for balanced handling. This M3/M4 square wheel set is the perfect choice for track enthusiasts who want to have a dedicated wheel/tire setup for track use. It's an 18x10" square set in the correct offsets for the perfect fit with no rubbing or clearance issues (even with lowered springs). We use Forgeline forged alloy wheels on our IMSA race cars and chose the new monoblock GS1R competition wheel for the F8X 18x10 square set.

Running as a square setup will allow you to use a rotatable tire set which saves tire life and gives more neutral handling. Forgeline wheels are designed for strength and performance, and are built to meet the extreme demands of sports car racing. Our IMSA/United Sports Car and Continental Sports Car Challenge GS M3s use Forgeline wheels and they are favored by many sports, GT, and Prototype teams in IMSA, Grand Am, ALMS, SCCA, and virtually every amateur sports car series in the US. The GS1R is Forgeline's latest forged competition wheel and an evolution of their previous successful wheel designs. The fully forged monoblock wheel has all unnecessary aluminum removed to reduce the weight as much as possible without sacrificing strength. For simplicity and to save weight, these wheels do not use a center cap. The rim material is lighter and stronger, thanks to the use of 6061-T6 aluminum. On our Project M3s, we have run these 18x10" wheels with 275/35-18 Continental slick tires (front and rear) and with no rubbing or fender rolling required! If you're using a big brake kit, contact us directly so we can build your wheel to clear your brakes. Multiple color and finish options are available - see the drop down menus below.

This package includes four (4) 18x10" ForgeLine GS1R competition wheels in your choice of custom finish and options. These wheels are built to order in the USA for each customer, without excessive backorders from overseas. Typical delivery time for these wheels is approximately 2 weeks. For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

 


Standard powder coat colors and finishes (no charge)

silver
gunmetal
satin gunmetal
titanium
graphite
matte graphite
gloss black
satin black
matte black
gloss bronze
matte bronze

Optional finishes (additional charge)

custom color powder coattransparent
smoketransparent
coppermidnight
silverrace goldmatte goldbrusheddiamond cut polishHTM
polishfully
polishedchrome


This item fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible

Forgeline
Part #: TMS206148
Price: $4999.95 (USD) 
Direct Ship
Free Shipping Free Shipping
E46 M3 Forgeline SE1 Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:9.0"10.0"
Offset (mm):3625
Concave Profile:ShallowDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This SE1 wheel set is built specifically for the E46 M3 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. The design is close to the E46 M3 CSL or ZCP wheels but we can build them in any size and offset that you want. The base package here has wheels that are bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat instead of paint or anodize. Forgeline chose this process because it makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This SE1 wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS340189
Price: $5175.00 (USD) 
Direct Ship
E46 M3 Forgeline GA1R Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:9.0"10.0"
Offset (mm):3625
Concave Profile:ShallowDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This GA1R wheel set is built specifically for the E46 M3 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. The "GA" in the GA1R name actually comes from the 'Grand-Am' racing series where Forgeline Wheels can be found on Prototype, GT, and GS racecars. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat instead of paint or anodize. Forgeline chose this process because it makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This GA1R wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS184602
Price: $5175.00 (USD) 
Direct Ship
F10 M5 Forgeline CF3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:20" or 21"
Width:9.0-9.5"10-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The CF3C wheel is a 3-piece design with the classic broad five spoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this CF3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This CF3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
20" Tire Sizes:21" Tire Sizes:
F:275/25-20"275/30-21"
R:295/25-20"
305/25-20"
295/30-21"
305/25-21"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011+ F10 BMW M5
2012+ F13 BMW M6
Forgeline
Part #: TMS186988
Price: $5524.00 (USD) 
Direct Ship
E46 M3 Forgeline CF3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The CF3C wheel is a 3-piece design with the classic broad five spoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this CF3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This CF3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS186954
Price: $5248.00 (USD) 
Direct Ship
F10 M5 Forgeline DE3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:20" or 21"
Width:9.0-9.5"10-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The DE3C wheel is a 3-piece design with the classic "BBS-style" mesh center and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this DE3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This DE3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
20" Tire Sizes:21" Tire Sizes:
F:275/25-20"275/30-21"
R:295/25-20"
305/25-20"
295/30-21"
305/25-21"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011+ F10 BMW M5
2012+ F13 BMW M6
Forgeline
Part #: TMS186989
Price: $5524.00 (USD) 
Direct Ship
E60 M5 Forgeline MS3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.0-9.5"10.0-10.5"
Offset (mm):9-1222-26
Concave Profile:customcustom

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The MS3C wheel is a 3-piece design in a classy multispoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this MS3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This MS3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:265/35-19"275/30-20"
R:275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6
Forgeline
Part #: TMS186981
Price: $5415.96 (USD) 
$5428 (Sale - Save 0%)
Direct Ship
Free Shipping Free Shipping
E9X M3, E82 1M Forgeline RB3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The RB3C wheel is a 3-piece design with multiple narrow spokes that stretch to the outer rim shell. The concave design and open spokes are great for showcasing big brakes and hidden hardware keeps the appearance clean and simple. The 'dished' look varies by offset and width. Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this RB3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This RB3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:20" Tire Sizes:
F:265/40-18"265/35-19"275/30-20"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.
6. Call or email us for a quote. We will not be beat on Forgeline pricing!!!


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011-2012 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Forgeline
Part #: TMS186980
Price: $5248.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline SE1 Monoblock Wheel Set

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This SE1 wheel set is built specifically for the E90/E92 M3 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This SE1 wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.
 

Steps To Designing Your Custom Wheels:

1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.

2. Select a wheel color and finish.

3. Choose a center cap design.

4. Call or email us for a quote. We will not be beat on Forgeline pricing!!!

 

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.
 

This wheel set fits the following BMWs:
2011-2012 E82 BMW 128i 135i 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Forgeline
Part #: TMS186951DK
Price: $5248.00 (USD) 
Direct Ship
F10 M5 Forgeline SE1 Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:20"
Width:9.5"10.5"
Offset (mm):2835
Concave Profile:MediumDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This SE1 wheel set is built specifically for the F10 M5 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This SE1 wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
20" Tire Sizes:
F:275/25-20"
R:295/25-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2012+ F10 BMW M5
Forgeline
Part #: TMS340305
Price: $5853.00 (USD) 
Direct Ship
E46 M3 Forgeline RB3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The RB3C wheel is a 3-piece design with multiple narrow spokes that stretch to the outer rim shell. The concave design and open spokes are great for showcasing big brakes and hidden hardware keeps the appearance clean and simple. The 'dished' look varies by offset and width. Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this RB3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This RB3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS186973
Price: $5248.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline CF3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The CF3C wheel is a 3-piece design with the classic broad five spoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this CF3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This CF3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:20" Tire Sizes:
F:265/40-18"265/35-19"275/30-20"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.
6. Call or email us for a quote. We will not be beat on Forgeline pricing!!!


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011-2012 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Forgeline
Part #: TMS186977
Price: $5248.00 (USD) 
Direct Ship
E46 M3 Forgeline DE3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The DE3C wheel is a 3-piece design with the classic "BBS-style" mesh center and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this DE3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This DE3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS186971
Price: $5248.00 (USD) 
Direct Ship
E60 M5 Forgeline GA1R Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.5"10.5"
Offset (mm):2027
Concave Profile:MediumDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This GA1R wheel set is built specifically for the E60 M5 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. The "GA" in the GA1R name actually comes from the 'Grand-Am' racing series where Forgeline Wheels can be found on Prototype, GT, and GS racecars. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This GA1R wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:275/30-19"275/25-20"
R:295/30-19"295/25-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
Forgeline
Part #: TMS186945
Price: $5493.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline DE3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The DE3C wheel is a 3-piece design with the classic "BBS-style" mesh center and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this DE3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This DE3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:20" Tire Sizes:
F:265/40-18"265/35-19"275/30-20"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.
6. Call or email us for a quote. We will not be beat on Forgeline pricing!!!


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011-2012 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Forgeline
Part #: TMS186978
Price: $5248.00 (USD) 
Direct Ship
Forgeline LS3 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:17" 18" or 19"
Width:7.0-13.0"7.0-13.0"
Offset (mm):variesvaries
Profile:with small-medium lipwith medium-large lip

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

The Heritage LS3 wheel is a 3-piece mesh design with design cues from the iconic BBS RS and BMW Style 5 wheels. This mesh design was almost made for German automobiles, but especially BMW. They just look right and correct for all generations of BMW styling where they compliment BMW's creased and sharp edged lines. These really pop in a gold finish especially in a contrasting black, red, or even white body color. These wheels look best with a medium or large outer polished lip. The complicated mesh design, exposed hardware, and polished lip give the wheel a lot of 'bling' but this design looks right at home on any BMW.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This LS3 wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing.

Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

Special Spring Pricing!
Forgeline
Part #: LS3-WHEELS-BMW
Price: $3995.00 (USD) 
Direct Ship
E60 M5 Forgeline CF3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.0-9.5"10.0-10.5"
Offset (mm):9-1222-26
Concave Profile:customcustom

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The CF3C wheel is a 3-piece design with the classic broad five spoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this CF3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This CF3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:265/35-19"275/30-20"
R:275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6
Forgeline
Part #: TMS186983
Price: $5366.00 (USD) 
Direct Ship
F10 M5 Forgeline RB3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:20" or 21"
Width:9.0-9.5"10-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The RB3C wheel is a 3-piece design with multiple narrow spokes that stretch to the outer rim shell. The concave design and open spokes are great for showcasing big brakes and hidden hardware keeps the appearance clean and simple. The 'dished' look varies by offset and width. Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this RB3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This RB3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
20" Tire Sizes:21" Tire Sizes:
F:275/25-20"275/30-21"
R:295/25-20"
305/25-20"
295/30-21"
305/25-21"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011+ F10 BMW M5
2012+ F13 BMW M6
Forgeline
Part #: TMS186991
Price: $5248.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline GZ3R 18x10 Square Race/Track Wheel Set If you're taking your E90/E92 M3 to the track, you should consider this wheel package, which features a set of 4 unstaggered (square set) Forgeline GZ3R light weight forged alloy race/competition wheels. Running as a square setup will allow you to use a rotatable tire set which saves tire life and gives more neutral handling. We have worked with Forgeline - the wheel supplier to our Grand-Am race team - so that these wheels are the 10" width and the perfect offset to fit with no rubbing or clearance issues.

Forgeline GZ3R
Forgeline wheels are designed for strength and performance, and are built to meet the extreme demands of sports car racing. Our Rolex GT and Continental Sports Car Challenge GS M3s use Forgeline wheels and they are favored by many sports, GT, and Prototype teams in Grand Am, ALMS, SCCA, and virtually every amateur sports car series in the US. The GZ3R is Forgeline's latest forged competition wheel and an evolution of the previous ZX3R. The new wheel has the same design and look as before but now uses hidden stainless steel ARP hardware for a smoother and clearner appearance (and easier to clean!). The forged wheel center also has all unnecessary aluminum removed to reduce the weight as much as possible without sacrificing strength. The rim material is lighter and stronger, thanks to the use of 6061-T6 aluminum. And for even further weight reduction opt for the titanium fasteners (optional, +$75 each wheel). On our Project M3s, we have run the ZX3R/GZ3R packages with 275/35-18 tires (front and rear) and have found this is simply the winning combination for the E9X M3. No rubbing or fender rolling required! If you're using a big brake kit, contact us directly so we can build your wheel to clear your brakes.

Save 24 lbs of unsprung weight! Stock BMW 18" M3 wheels weigh 48lbs front and 51 lbs rear, with tires. The optional 19" factory wheels are 47 lbs / 51 lbs with tires. This Forgeline package weighs only 43 lbs a corner with tires -- a weight savings of either 22 or 24 lbs over stock.

This package includes four (4) 18x10" ForgeLine GZ3R competition wheels in your choice of custom finish and options. These wheels are built to order for each customer, without the long wait time. Typical delivery time for these wheels is approximately 2 weeks.

This item fits the following BMWs:
2011-2012 E82 BMW 128i 135i 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW 335i M3 - Convertible
Forgeline
Part #: TMS1964
Price: $3995.00 (USD) 
Available
E46 M3 Forgeline MS3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The MS3C wheel is a 3-piece design in a classy multispoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this MS3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This MS3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:
F:265/40-18"265/35-19"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2001-2006 E46 BMW M3
Forgeline
Part #: TMS186975
Price: $5248.00 (USD) 
Direct Ship
E60 M5 Forgeline RB3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.0-9.5"10.0-10.5"
Offset (mm):9-1222-26
Concave Profile:customcustom

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The RB3C wheel is a 3-piece design with multiple narrow spokes that stretch to the outer rim shell. The concave design and open spokes are great for showcasing big brakes and hidden hardware keeps the appearance clean and simple. The 'dished' look varies by offset and width. Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this RB3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This RB3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:265/35-19"275/30-20"
R:275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6
Forgeline
Part #: TMS186986
Price: $5366.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline MS3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18" or 19"
Width:8.5-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The MS3C wheel is a 3-piece design in a classy multispoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this MS3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This MS3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:20" Tire Sizes:
F:265/40-18"265/35-19"275/30-20"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.
6. Call or email us for a quote. We will not be beat on Forgeline pricing!!!


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011-2012 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Forgeline
Part #: TMS186979
Price: $5248.00 (USD) 
Direct Ship
E9X M3, E82 1M Forgeline GA1R Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:18", 19", or 20"
Width:9.0-9.5"10.0-10.5"
Offset (mm):variesvaries
Concave Profile:DeepDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This GA1R wheel set is built specifically for the E90/E92 M3 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. The "GA" in the GA1R name actually comes from the 'Grand-Am' racing series where Forgeline Wheels can be found on Prototype, GT, and GS racecars. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This GA1R wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
18" Tire Sizes:19" Tire Sizes:20" Tire Sizes:
F:265/40-18"265/35-19"275/30-20"
R:275/35-18"
285/35-18"
275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.
4. Call or email us for a quote. We will not be beat on Forgeline pricing!!!


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Forgeline
Part #: TMS184608
Price: $5248.00 (USD) 
Direct Ship
E60 M5 Forgeline SE1 Monoblock Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.5"10.5"
Offset (mm):2027
Concave Profile:MediumDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This SE1 wheel set is built specifically for the E60 M5 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This SE1 wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:275/30-19"275/25-20"
R:295/30-19"295/25-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
Forgeline
Part #: TMS340210
Price: $5493.00 (USD) 
Direct Ship
F8X M3/M4, F87 M2 Forgeline GA1R Monoblock Wheel Set As used on the Turner M3/M4 Project Cars
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.0-9.5"10.0-11.0"
Offset (mm):variesvaries
Concave Profile:DeepDeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

This GA1R wheel set is built specifically for the E90/E92 M3 chassis with sizes and offsets for an aggressive fitment with minimal clearance issues. We have sized these wheels to be bigger than stock but with staggered sizes to maintain a muscular and purposeful look. One of the best attributes for a custom wheel is that spacers are not required. Wheel caps are included or the wheel can be custom made to use the factory BMW center cap. You can re-use your original BMW wheel bolts or pick up a fresh set from our options below. We can also mount and balance your tires prior to shipping. TPMS brackets are included as well (sensors additional if required). Because Forgeline Wheels are custom made to order, typical production lead time is 2-3 weeks.

The one-piece monoblock wheels feature the strength of racing wheels with fewer pieces for reduced weight. The "GA" in the GA1R name actually comes from the 'Grand-Am' racing series where Forgeline Wheels can be found on Prototype, GT, and GS racecars. Additional machining, and Forgeline's "I-beam" spoke technology further reduce weight without compromising stiffness. Each wheel design has been finite element tested to ensure strength under extreme conditions. Forgeline starts with a block of 6061-T6 aluminum that is CNC-milled to the style and specs of the customer's order. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. This is a 1-piece wheel so outer lip and inner barrel finishes will match whichever wheel center you choose. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This GA1R wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:265/35-19"275/30-20"
R:275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a wheel color and finish.
3. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
Forgeline
Part #: TMS208371
Price: $6625.00 (USD) 
Direct Ship
F10 M5 Forgeline MS3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:20" or 21"
Width:9.0-9.5"10-10.5"
Offset (mm):variesvaries
Concave Profile:customdeep

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The MS3C wheel is a 3-piece design in a classy multispoke pattern and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip, bold chamfered spoke edges, the Forgeline logo machined into the the wheel center, and a stepped lip that makes the wheel center smaller (and lighter). A wide lip is also available. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this MS3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This MS3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
20" Tire Sizes:21" Tire Sizes:
F:275/25-20"275/30-21"
R:295/25-20"
305/25-20"
295/30-21"
305/25-21"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2011+ F10 BMW M5
2012+ F13 BMW M6
Forgeline
Part #: TMS186990
Price: $5248.00 (USD) 
Direct Ship
E60 M5 Forgeline DE3C 3-Piece Wheel Set
Wheel Set Specs
Fitment:FrontRear
Diameter:19" or 20"
Width:9.0-9.5"10.0-10.5"
Offset (mm):9-1222-26
Concave Profile:customcustom

Forgeline is among the premier forged alloy wheel manufacturers in the world. Forgeline's greatest attributes is their obsessive attention to detail and commitment to quality. They produce exciting and innovative wheel designs that stir the passions of automotive enthusiasts from every segment. Forgeline is world-renowned as a manufacturer of advanced forged alloy wheels that find their way to show-stopping project vehicles as well as the winner's circle of major racing events. Forgeline Wheels are an extension of your own automotive style and taste and that's why every Forgeline wheel set is custom-tailored. You become the wheel designer providing the finishing touch or the inspiration for a great build. The broad range of options and possibilities, limited only by your imagination, and the premium that true forged wheels demand virtually ensures exclusivity. Very few Forgeline sets will be entirely alike. We have been a Forgeline dealer for nearly twenty years and use them on our own Turner Motorsport race cars.

Forgeline's Concave series of wheels delivers breathtaking presence and a 'deep' impression. The DE3C wheel is a 3-piece design with the classic "BBS-style" mesh center and hidden hardware. This is a Concave design with the 'dished' look (varies by offset and width). Details include full-length spokes that stretch to the wheel lip and bold chamfered spoke edges. The result is an exceptionally clean and impressive design.

Forgeline's 3-piece wheels consist of the inner barrel, wheel face, and outer lip. Each is milled from aviation-grade 6061-T6 aluminum. Each wheel design has been finite element tested to ensure strength under extreme conditions. The wheels are then polished by hand and checked for any imperfections. All wheels are powder coated then finished with a clear coat. This makes the wheel easy to clean and very durable. The powder coating is done in-house at Forgeline to ensure the highest quality and results. On a wheel with hidden fasteners like this DE3C the wheel center is pressed with Heli-Coil inserts. This is a better and more durable method than tapping the aluminum itself. Stainless steel ARP hardware holds the pieces together. Finally, each wheel is checked for run-out to within .020" of true.

Forgeline prides itself on building wheels that match their customer's sense of style and identity. That's why every Forgeline wheel is customizable. This DE3C wheel can be customized to fit your specific requests. Sizes, offsets, colors, finishes, and accessories can all be made to your specification. Contact us for further information on a custom Forgeline wheel set for you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Because Forgeline wheels are custom manufactured, returns or refunds are not available. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Suggested tire sizes:
(have your tires sent to Forgeline or Turner Motorsport for professional mounting and balancing)
19" Tire Sizes:20" Tire Sizes:
F:265/35-19"275/30-20"
R:275/30-19"
285/30-19"
295/30-20"
305/25-20"


Steps To Designing Your Custom Wheels:
1. Choose a wheel size. We have provided several default sizes or you can choose a custom size.
2. Select a Wheel Center color and finish.
3. Select a Inner Barrel color and finish.
4. Select a Outer Lip color and finish.
5. Choose a center cap design.


Standard powder coat colors and finishes (no charge)
(click to expand)
(clickable for larger size):
silvergunmetalsatin
gunmetal
titaniumgraphitematte
graphite
gloss
black
satin
black
matte
black
gloss
bronze
matte
bronze
Optional finishes (additional charge)
(click to expand)
(clickable for larger size):
custom color powder coattransparent
smoke
transparent
copper
midnight
silver
race goldmatte goldbrusheddiamond cut polishHTM
polish
fully
polished
chrome
Center cap designs:
(click to expand)
(clickable for larger size):
aluminum cap with black/red logo on brushed silver backgroundaluminum cap with silver logo on satin black backgroundaluminum cap with engraved logo (finish will match wheel center)BMW center cap option (wheel is machined to accept factory center cap)

Additional sizes, offsets, colors, and finishes are available. Contact us for a custom wheel quote.

This wheel set fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6
Forgeline
Part #: TMS186984
Price: $5366.00 (USD) 
Direct Ship