Synthetic DOT 4 brake fluid.
Boiling Point - Dry: 509 Degrees Fahrenheit / Wet: 338 Degrees Fahrenheit.
The Ate SL6 fluid is a low viscosity formula for modern ABS and DSC systems.
The Ate SL6 fluid is a low viscosity formula for modern ABS and DSC systems. BMW recommends low viscosity brake fluid for all chassis beginning with the E60 5-series. Low viscosity (LV) is a thinner fluid that works better than a normal fluid in the small channels and passageways in the ABS/DSC pump. Using the heavier fluid will result in a delayed response to ABS and DSC activation and a spongy feel in the brake pedal (only during ABS stops). Ate SL.6 falls just short of DOT5 specs so is classified as a DOT4. It can be mixed with other DOT4 or DOT5.1 fluid. For track use, a heavier high-performance brake fluid such as Ate Typ 200 or Motul RBF600 or RBF660 is recommended because of their higher boiling point and because the thicker fluid will thin out at track temps. But for street use, we recommend switching back to an LV fluid, especially in colder climates.
This product is not eligible for Lifetime Replacement
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
All
All
All
Use vehicle selector to confirm fitment
MINI
All
All
All
Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.