Fluids for BMW 5 Series E28 (1982-1988)

Diesel particulate filters can become clogged and less efficient with time when the DPF is unable to achieve it's needed temperature to start the automatic regeneration process, converting the soot to ash. This is common for cars that often see short trips that don't allow the engine and exhaust to heat up completely. Using a protector such as this routinely significantly helps�to ensure�the best power delivery possible as well as continued high fuel mileage by preventing the soot from restricting exhaust flow and overall performance. Liqui-Moly's Diesel Particulate Filter Protector allows the automatic regeneration process to start at a lower temperature, allowing the filter to be cleared earlier, preventing a loss of power and even a potentially expensive service fee.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Looking to clean your diesel engine and it's injectors? The Liqui-moly Diesel Purge additive is a professional deep cleaning agent that can remove build up in your diesel motor in order to restore performance, reduce emissions, and reduce the amount of blue smoke coming from the tail pipe. For extreme  cleaning, this additive can even be fed in directly through the fuel line or poured into the fuel filter during a filter change. This give your diesel motor a concentrated blast of this cleaner, further helping to eliminate potential contaminants with its specially formulated detergents that will clean your motor without damaging any internal seal or gaskets.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

One of the most popular engine oil choices on the market today, Castrol Edge Professional TWS 10-60 engine oil is premium engine oil approved by BMW for use in a wide variety of engines such as the M30, S54, S85, and many more. In fact, this oil is the same oil that BMW uses for their performance engines from the factory. Thanks to its premium blend of synthetic oil and additives, this oil continues to provide protection under even the harshest conditions and is perfect for both street cars and cars that see occasional track use.

Specifications:

• SAE-10w60
• ACEA A3/B4
• API SN/CF
• VW 501 01/505 00
• Exclusive Approval for BMW M-Models

This oil is approved for the following BMW engines:
M62 4.8L, S54 3.2L, S62 5.0L, S65 4.0L, S85 5.0L, S38 3.5L, M30 2.5-3.4L, M15 2.0L, 3.0S, 2.8

All sets of 12 now 10% off regular price!

Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Features:

• Provides G-4 level gear protection (suitable for transmissions and transaxles, like the Corvette T-56).
• Provides smooth and consistent shifts.
• More stable than petroleum fluids; suitable for extended drain intervals.
• Does not varnish at high temperatures.
• Improved cold weather characteristics.

All sets of 12 now 10% off regular price!

Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.

Conforms to BMW LL-01 standards.

Turner Motorsport recommends flushing and replacing your manual transmission and differential fluid regularly to ensure proper component wear and prevent costly issues in the future. Refer to your owner's manual for specific intervals for flushing and refill.

Liqui Moly Gear Oil for your BMW

This fully synthetic 75w90 weight gear oil is designed to maintain smooth shifting in your transmission. Its unique multi-viscosity formula provides excellent protection in all weather conditions. Being fully synthetic, it guarantees smoother shifts across all vehicles.

Note: Verify that your application requires GL4 oil. This product meets API GL-4+ specifications.

Liqui Moly Diesel Fuel System Cleaner for your BMW

Turner Motorsport presents Liqui Moly Diesel Fuel System Cleaner for your BMW. This powerful blend of additives effectively removes performance-degrading deposits from the fuel system in all diesel engines. It cleans injectors and the combustion chamber, restoring proper fuel atomization for enhanced engine efficiency.

Key Benefits:

• Rapid removal of deposits
• Cleans injectors and combustion chamber
• Restores proper fuel atomization
• Improves engine efficiency
• Suitable for use in all diesel engines
• Safe for use with catalytic converters and particulate filters (DPF)
• Easy application directly into the fuel tank
• Can be used preventively or to address acute engine issues

Each 500 ml bottle is sufficient for 25–115 Liters (7 gal. to 30 gal.) of fuel.