Your car doesn't just have to be sitting for the season in storage to need a memory saver, sometimes just having the car up for the week could cause the battery to drain. Don't waste time sitting and resetting all of your electronics once you get your car back together, get out there and drive, let the memory saver lock in your settings.

Features: 

• Avoid loss of memory during car battery replacement

• Works with most cars with OBDII 1996 and latter

• Comes with two power leads, one hooks to a 9 volt battery (9 volt battery not included), or use the other 82" long lead that can be clamped to any 12 volt battery or power source.

• Polarity Protection, LED Power Indicators identify connection status and low battery power indicator.

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

This item fits the following BMW Chassis:
E30 M3,E30

The Schwaben Magnetic Camber Gauge measures the Camber angle on the wheel hub or brake disc and allows on-car adjustment to ensure correct wheel alignment. This is a useful tool for setting Camber angles back to pre repair setting after dismantling and re-assembling of the suspension or struts and is an ideal track day companion.

Features:

• Easy to use magnetic gauge attaches to the hub or brake rotor
• Graduations of +/- 6 degrees 
• Comes supplied in a durable storage case
• Measurements are 5" long with a 2" magnetic base

Rebuild your power steering pump with all new gaskets and seals from Genuine BMW to restore your pumps functionality.

Genuine BMW Gasket Set Vane Pump - Zf
This item fits the following BMW Chassis:
E24, E30, E34, E36

This rear shock bump stop is designed for use on all cars, especially with lowered suspensions. This prevent shocks from bottoming out and causing damage from excess travel.

Used on the following chassis:
E30 E36 E28 E34 E39 E24 E32 E38 E65 E66

Clean up the look of your M3's front spoiler with the Genuine BMW Euro Tow-Hook Cover. This is the RIGHT side tow hook cover. Standard on all Euro M3's This covers in conjunction with the Evolution air box kit (see intake) actually help make power by creating a low pressure zone behind the front spoiler. (Require painting) 

Get all the right parts for the job! We also recommend purchasing these parts required for installation:
51111940365 – Holding strap (2 required per cover, 4 per car)
51111940365 – Fixing clamp (2 required per cover, 4 per car)

Looking for the complete kit? We also offer a complete kit that includes both left & right cover, and other required parts. To view and purchase the kit, please see part # 51111940365KIT 

This item fits the following BMWs:
1988-1991 E30 BMW M3

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.

Features:

• Durable synthetic leather with the Turner logo
• Soft goose flannelette backing
• Four 9.5" integrated magnets

Dimensions:

•  Extra Long 20" x 47"

TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

• Handy pocket clip
• Pivoting quick attach mirror for perfect viewing at any angle.
• Extends up to 26 1/4" for hard to reach places.
• Collapsed length 6.5" without mirror attached, 9.5" with 
• High quality mirror provided a perfect reflection.
• Easy on and off. Turns on when extended and off when collapsed.
• 44,000 MCD brightness.
• Long life span up to 100,000 hours on LED bulb.
• Operates on 3 AG3/LR41 batteries 
• Includes batteries

TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.

MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

ECS Tuning "Ti.22" Titanium Exhaust Tips

Enhance your vehicle's appearance with ECS Tuning "Ti.22" Titanium Exhaust Tips, renowned as the most attractive tips available. These exhaust tips come in a striking matte titanium finish with a slant cut, single wall outlet design, ensuring a visually stunning addition to your vehicle.

Engineered for durability, these tips feature chrome-plated nuts, a 304SS cap screw, and clamp, guaranteeing long-lasting performance.

Please note: Modification may be necessary for proper fitment as these tips offer UNIVERSAL fitment and are not a direct fit for your vehicle. Ensure accurate measurement before ordering to ensure compatibility.

Benefits:

• Matte titanium finish for an attractive appearance
• Slant cut, single wall outlet design
• Engineered with durable materials for longevity
• Chrome-plated nuts, 304SS cap screw, and clamp for lasting performance

BMW enthusiasts looking to fabricate a custom exhaust project will find quality and price-friendly options in the ECS Tuning Universal Exhaust catalog. These select items feature the same premium benefits as our In-House Engineered Exhaust Systems, ensuring confidence in their quality and longevity.

Part Design:

• Made from T304 Stainless Steel for corrosion resistance with an attractive brushed finish
• 3.0" outside diameter (OD)
• 1.5mm (.060") wall thickness tubing for durability
• U-Bend Centerline Radius - 5.0" @ 180° angle
• Leg Length "A" - 7.0"
• Leg Length "B" - 14.0"
• Leg Length "C" - 27.0"

Product Development:

• Developed top-tier exhaust components through our In-House Engineered Exhaust Systems
• Direct-fit components for specific European applications now available for custom exhaust projects

Installation and Support:

• Universal parts with no direct fitment to any particular vehicle
• Custom welding and fabrication required
• Special prep/clean procedures must be followed for proper welding due to brushed finish

Elevate your BMW with ECS Tuning Universal Exhaust components, designed for quality and durability in custom exhaust projects.

Makes those hard to reach hose clamps much easier to loosen up.

Features:

• 7mm driver
• 6"  flex shaft
• Overall length of 10-1/2"
• No-slip grip resistant to wet or oil coated hands

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.