The Style 4 wheel is a classic multispoke design. Originally used on the E38 7-series, the design looks at home on other 5/6/7-series from the era and even the E30 M3. The 16x8.0 size is perfect for a 16" square set with a 225-235 tire. The large wheel center cap and the unqiue BMW wrench is included in the set price.

BMW Style 4 wheel set includes -

• 4 x 16x8.0" ET23 BMW Style 4 Multispoke alloy wheel (BMW #36111181841)
• 4 x BMW Style 4 wheel center cap (BMW #36131182203)
• 1 x BMW hub cap wrench (BMW #36131181948)

Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail. 

ECS Tuning proudly presents extended wheel bolts, available individually or matched with our spacers to ensure precise fitment. These bolts adhere to the stringent ISO 898 class 10.9 standards, guaranteeing exceptional mechanical and physical properties. Lab-tested to confirm class 10.9 compliance, they meet rigorous requirements for material properties, hardening, and proof load strength.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 32mm

Note: For wheel spacer installation, add the spacer size to the OE wheel bolt's length for accurate fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12
 

ECS Tuning is proud to offer extended wheel bolts individually or with our spacers that are matched to take the guesswork out of correct fitment. Our bolts are designed to meet ISO 898 class 10.9 mechanical and physical properties. This is a very strict standard that specifies material properties, hardening and tempering requirements, and proof load strength requirements. Furthermore, our fasteners have been lab tested to verify that they meet class 10.9 requirements.

Bolt specifications:

• Diameter - 12mm
• Thread Pitch - 1.5mm
• Length - 50mm

*When installing wheel spacers, add the size of the spacer to the length of the OE wheel bolt for proper fitment (ex. 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

ECS Tuning Extended Wheel Bolts for BMW

Upgrade your BMW's wheels with ECS Tuning Extended Wheel Bolts, designed for precise fitment and exceptional strength. These bolts meet ISO 898 class 10.9 standards, ensuring top-tier mechanical and physical properties. Lab-tested for quality assurance, they provide peace of mind for your wheel setup.

Benefits:

• Ensures correct fitment with ECS Tuning wheel spacers
• Meets ISO 898 class 10.9 standards for superior strength and durability
• Lab-tested for quality assurance and peace of mind
• Easy installation for hassle-free upgrade

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000WF Wi-Fi TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market.

Features:

Rubber valve stem. 315MHz and 433MHz dual frequency. High precision air valve to avoid air leakage. 0-30 degree adjustability. Build in battery with an extended service life (more than 5 years) Temperature reading range -40F - 257F Pressure monitoring range 0 to 130.53psi Weight - 12G

Details matter.

That's why we've added Dinan Valve Stem Caps to the ever-expanding product lineup! Sold as a set of 4 aluminum caps, each has a Dinan "egg" logo engraved on the face to accentuate even the smallest of details in your high-performance build.

Features:

Nuanced design for universal visual appeal

Dinan "egg" logo on top

Black finish

Aluminum construction

• 75MM, 85MM, or 95MM LENGTHS
• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (red Turbo-Lock or similar).

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

MSI Racing specializes in hardware for motorsports and other advanced industries and their wheel studs are some of the very best in the professional motorsports world. MSI is already a major supplier to teams in the top NASCAR categories and we tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well. These studs are available in multiple lengthsand all sizes are made with aircraft quality material and have roll formed threads. The coating is a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. This coating process reduces friction and wear to prevent thread galling. Another benefit is that these have the best corrosion resistance we have seen in any wheel stud! A dry lube stud has the most corrosion resistance than a plain black coating because the lube is applied over the black phosphate coating. Salt tests have shown this stud is superior to others in corrosion resistance. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations.

These studs are the perfect choice for endurance racers, sprint racers, track-only cars, or even hardcore street cars. The bullet nose on this stud is deeper than other studs we have used. More of the stud protrudes through the open nut so that everything lines up better on the threads. This helps to eliminate the possibility of cross-threading or thread stripping. In addition, the shank has been machined for proper brake rotor alignment. The dry lube helps the nut engage and glide over the threads for faster pit stops without cross threading or binding.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.
Wheel nuts sold separately.

12x1.5 Conical Seat Wheel Nuts with 17mm Hex Head

ECS Tuning introduces 12x1.5 conical seat wheel nuts featuring a 17mm hex head, tailored for vehicles that have transitioned to a stud-style mounting system. These open-ended wheel nuts are the perfect solution for accommodating longer studs without any fitment concerns.

Product Details:

• Thread Size: 12x1.5
• Hex Head Size: 17mm
• Designed for vehicles with stud-style mounting
• Open-ended design to accommodate longer studs

Upgrade your BMW or MINI with Replacement Wheel Bolts, available in striking black. Whether you're aiming for a quick styling enhancement or need to replace lost stock bolts, these are an ideal choice. Designed with a standard conical seat, they seamlessly fit OEM applications, ensuring compatibility and a stylish appearance.

Benefits:

• Quick styling upgrade for your vehicle
• Sleek black finish for an enhanced look
• Compatible with BMW and MINI models
• Standard conical seat design for OEM fitment

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

• Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
• Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
• Easy Installation: Simple to install and compatible with most standard valve stems.
• Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
• Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.