BMW Tools & Specialty Equipment for BMW 8 Series E31 (1991-1997)

Handsome sockets are shop tough, plated to resist corrosion, and color-coded for fast identification. Set takes up less room in your tool box than conventional torque sticks, and comes in a handy blow-molded case for portability and easy organization.

Torque-limiting socket set prevents over-tightening of wheel bolts and lug nuts. Attach them to your ½-inch breaker bar or impact gun and tighten the wheel bolts or lugs until the socket stops tightening at 74 ft-lb (100 Nm). Then final-tighten the wheel fasteners to the recommended specification using a torque wrench.

Features:

• 17, 19, and 21 mm six-point impact sockets to fit most metric wheel bolt heads and lug nuts.
• Combine these with our Protecta Sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

The cutting-edge GENIUS1 is a powerhouse among our chargers renowned for its exceptional performance, energy efficiency, and compact design. The GENIUS1 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a 1-amp rating. It's engineered to work with lead-acid batteries in automotive, marine, and deep-cycle applications, supporting flooded, gel, AGM, maintenance-free types, and even lithium-ion batteries.

Features: 

• Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
• Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
• Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

A perfect collection of hex head sockets compiled in a case that's always ready to go.

Features:

• High strength hex driver set, in 3/8 and 1/2-inch drive, is rugged enough for professional use and includes 4, 4.5, 5.5, 6, 8, 12, 14, and 17mm sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.

Features: 

• Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
• Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
• Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
• Engineered to efficiently transfer maximum current flow with minimal power loss.
• Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Schwaben Torx® set contains six drivers, all with center hole, suitable for use on both standard and tamper-proof Torx fasteners

Features:

• Each 3/8-inch driver shank is clearly stamped with the bit size, and has a ribbed circumference for improved grip when turning fasteners by hand
• High strength driver set is tough enough for regular use and includes T15, T20, T30, T40, T45, and T50 sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

The Foxwell TS5000 Tablet TPMS Service Tool is a mid-level tool designed to activate OEM/Universal TPMS sensors, retrieve comprehensive TPMS sensor data including sensor ID, tire pressure, temperature, battery condition, and OE part number. With the ability to relearn 98% of sensor IDs, program FOXWELL T10-sensors to replace old sensors, and even test Remote Keyless Entry Key Fobs, this tool offers a versatile solution for automotive professionals and enthusiasts alike.

Equipped with regular hardware and software updates, the Foxwell TS5000 Tablet TPMS Service Tool enables users to address automotive issues with enhanced precision and efficiency. It strikes the perfect balance between advanced TPMS diagnostic capabilities and affordability, making it the go-to choice for enthusiasts seeking top-notch performance without the usual high costs associated with TPMS tools.

Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

• Will allow you to connect to all sensors at once and view all of their data at the same time
• Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
• Wireless connection to OBD2 port
• Wireless updates (One Touch Update)
• Larger screen (5.5-inch screen, T2000 is 2.8-inch)
• Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
• CAN FD support
• Print TPMS sensor data on PC

More Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
• 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Read TPMS Live Data
• Basic Code Reading capabilities using OBDII
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Free Software Updates for Life
• LIFETIME REPLACEMENT program

Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

• Copy by OBD:
  • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
  • This eliminates the need for a relearn by combining both steps into one
• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you can input the ID to program new sensor.
• Auto Create Sensors:
  • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor

Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

• OBD Relearn:
  • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
• Automatic Relearn:
  • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
• Stationary Relearn:
  • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!

Note:

• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability
• We recommend purchasing a Bentley Manual to use with your TPMS Tool.
• You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require T366829  for use 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.