Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.
Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.
Most of the engines from the mid-1980s through the 1990s use the same thermostat design and they are interchangeable among the different temperatures. This is the 68*C thermostat, at the bottom of the temperature range. It should only be used in racing situations such as when deleting the engine fan. However, keep in mind that BMW spent a lot of time engineering the cooling system to work in all kinds of conditions and changing thermostat temperature is not recommended to fix any failures in the cooling system.
Mishimoto makes coolant tanks, radiators and much more for your Mini/BMW. Established in 2003 their commitment to absolute quality in the aftermarket world is evident through the quality and performance enhancing products they offer.
This thermostat fits the following BMWs:
1977-1983 E21 BMW 323i
1986-1991 E30 BMW 318is 318ic 325e 325es 325i 325ic 325is 325ix
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1982-1988 E28 BMW 528e
1986-1988 E28 BMW 535i
1989-1995 E34 BMW 525i 535i
1997-1998 E39 BMW 528i
1986-1989 E24 BMW 635csi
1988-1994 E32 BMW 735i 735il
1997-2000 Z3 BMW Z3 2.8 M Roadster M Coupe
Ensure your engine runs at the perfect temperature by using this versatile manual fan controller system, compatible with all 12v fan-equipped vehicles. With adjustable activation temperature settings ranging from 150°F to 240°F, you have precise control over your engine's cooling fan. The kit includes a probe-style temperature sensor and a generous 7 feet of wire, making it suitable for installation in vehicles of various sizes.
For added convenience, the system is equipped with a built-in A/C override feature, ensuring your cooling system works seamlessly. It's designed to work with one or two electric fans drawing a combined 25 amps or less. The package includes all the essential wiring connectors and hardware needed for a trouble-free installation.
With a lifetime warranty from Mishimoto, you can trust in the quality and durability of this manual fan controller kit.
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.
Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warnings, visit www.P65Warnings.ca.gov.
To make sure your temperature readings are as accurate as possible, replace your temperature sensor with a high quality OEM Bosch temperature sensor.
OEM replacement for BMW part # 13621709967, 13621709966, and 13621284397. Bosch coolant temperature sensor mounted in the cylinder head on models with the M42, M50 and S50 engines.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
1988-1991 E30 BMW 318i 318is 318ic M3
1992-1995 E36 BMW 318i 318is 318ti 318ic 325i 325is 325ic M3
3/1987-1988 E28 BMW 528e
1985-1988 E28 BMW535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1985-1989 E24 BMW 635csi M6
1984-1987 E23 BMW 735i
1988-1992 E32 BMW 735i 735il
This OEM Hella/Mahle-Behr engine fan clutch fits BMW E46 M3, Z3 M Roadster, M Coupe 2001-2002, E34 535i & M5, and E32 735i 735il. Made to the same or higher standards of quality as the genuine part, ensuring proper fan control and cooling. Failed fan clutches can result in overheating due to the fan not spinning fast enough to deal with excess heat or can cause poor engine performance when a clutch has locked up causing the fan to be fully engaged permanently.
Hella is a premium manufacturer that supplies automotive parts to numerous car brands across the world. Everything from electrical to mechanical genuine parts have been made and supplied directly to BMW before the vehicles ever leave the production floor. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW on the road for many years to come.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2001-2006 E46 BMW M3
1989-1993 E34 BMW 535i M5
1988-1992 E32 BMW 735i 735il
2001-2002 Z3 BMW M Roadster M Roadster
Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.
Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.
In pursuit of optimal engine lubrication, even under ideal driving conditions, is paramount for BMW owners. Elevated oil temperatures can compromise oil pressure and hinder efficient lubrication. Turner Motorsport's new oil cooler offers a solution to maintain cool oil temperatures, ensuring your engine functions at its best. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter.
Elevate your BMW's engine performance and protect it from the effects of elevated oil temperatures. Turner Motorsport has the solution you need.
WARNING! Prop 65 may apply to this product.
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.
For more information about California Prop 65 warning, see: www.P65Warnings.ca.gov.
For BMW owners seeking enhanced airflow or tighter engine compartment clearance, Turner Motorsport presents a Universal Fan. Ideal for applications like aftermarket turbo setups, this fan ensures optimal cooling performance. Please note that this fan is universal and may require modification to fit your specific application. Crafted in Italy, this fan boasts dimensions of 16.30in x 15.75in x 3.47in and provides an airflow of 2024 CFM.