BMW Internal Engine Parts for BMW 5 Series E34 (1987-1995)

Rocker Arm - E30 325e 325i 325is - E34 525i (M20)

We Price Match - Give Us A Call or Chat!

T#:3387

Part#: 11331271429

In Stock

$ 33.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

If there is one weak point to the internals of the M20 engine, it's the camshaft rocker arms. They're actually designed to be the weak link to prevent more extensive damage elsewhere in the valvetrain. The rocker arm actuates the valves as the cam lobe makes contact. But sustained running at high RPM will cause the valves to 'float' or stay open which can lead to contact between the piston and the valves. If this happens too often, it will fatigue and snap the rocker arm. Therefore, any track driven E30 should have the rockers inspected or replaced often, along with a correct valve adjustment. And any high mileage M20 engine is running the risk of failure because of fatigue and weak valve springs. It's also a good idea to use new rocker arms any time a new cam is installed as the cam and the rocker wear together.

Replacement of the rocker arms can be done with the cylinder head in the car but more often, the head is removed. This makes removing the rocker shafts easier. Either way, a new cylinder head gasket set is recommended as it includes all of the gaskets and plugs that you would need. If the head stays on the car, the radiator may need to be removed to allow more access for the shafts to come out. Replacing the engine timing belt is not done at the same time and should be treated as a separate job.

These Febi M20 rocker arms are sold per rocker (order 12 for a complete set). You may also want to replace the eccentric adjusters as it's easy to do and worn eccentrics may prevent you from properly adjusting the valves afterward.

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

Rocker Arm - M10 4 cylinder, M30 6 cylinder engine

We Price Match - Give Us A Call or Chat!

T#:6780

Part#: 11331271833

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
07-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
07-13-2026

$ 29.44 USD

Add to Wish List

Replace your worn rocker arm with this unit. The rocker arms make contact with the camshaft and control the movement of the valves. Any time a camshaft is replace it is always a good idea to replace the rocker arms with new units. It is also a good idea to replace the rocker shafts that the arms mount on.
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1984-1985 E30 BMW 318i
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 533i 535i 535is
1989-1993 E34 BMW 535i
1982-1989 E24 BMW 633csi 635csi
1981-1987 E23 BMW 733i 735i
1988-1992 E32 BMW 735i 735il

Show More Show Less

Schrick Camshaft - M20 288 degree

T#:3501

Part#: 05601880-00

Ships on Nov 6, 2026

$ 490.00 USD

Add to Wish List

Qty

$ 490.00 USD

Add to Wish List

SEE T#338236

Febi Camshaft - E30, E34

We Price Match - Give Us A Call or Chat!

T#:19082

Part#: 11311716138

In Stock at Vendor

$ 368.34

This product was last offered at the strikethrough price on
05-15-2026

$ 292.43 USD

Add to Wish List

Qty

$ 292.43 USD

Add to Wish List

CAMSHAFT 11311716138 Manufactured by Febi

This item fits the following BMWs:
BMW 3 Series - 325i, 325i Convertible, 325is, 325ix
BMW 5 Series - 525i

--.

Show More Show Less

Febi Valley Pan With Gasket - E31, E32, E34, E38, E39, E53

We Price Match - Give Us A Call or Chat!

T#:366991

Part#: 11141742042

In Stock at Vendor

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Experiencing a slow, mysterious, loss of coolant? Smell coolant when accelerating or braking? Time for a valley pan gasket service!

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3

We Price Match - Give Us A Call or Chat!

T#:363745

Part#: 11121721938

Ships on Oct 16, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Schrick Camshaft - E30 325i, E34 525 (M20) 304 degree

T#:338233

Part#: 05601040-00

Ships on Nov 6, 2026

Starting at $ 1,489.99 USD

Add to Wish List

Starting at $ 1,489.99 USD

Add to Wish List

Schrick's most aggressive cam for the M20 engine. The 304-degree will make big power at the top but there will be a loss of low-end torque so this cam is only recommended for cars that see most of their time above 4000 rpm. Schrick High Performance valve springs are strongly recommended. This cam has a 12.2mm lift and will not clear stock M20 pistons.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 288 degree

T#:338236

Part#: 05601880-00

Ships on Nov 6, 2026

Starting at $ 490.00 USD

Add to Wish List

Starting at $ 490.00 USD

Add to Wish List

E30 325i, E34 525 (M20) 288 degree Schrick Camshaft. This is Step 3 in Schrick's line of performance cams and the best balance of power and driveability. Expect a big boost of power at the top end but a slight loss in low-end torque. Schrick recommends replacing the valve springs with their own for this application.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 288 degree

T#:389586

Part#: 338236TCKRM3LJXJ

Ships on Nov 6, 2026

$ 490.00 USD

Add to Wish List

Qty

$ 490.00 USD

Add to Wish List

Schrick Camshaft Set - E36 M3-spec - 252/244 Degree

T#:21521

Part#: TMS21521

Ships on Nov 6, 2026

$ 3,470.66 USD

Add to Wish List

Qty

$ 3,470.66 USD

Add to Wish List

These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick Camshaft - E30 E34 M20 284

T#:206

Part#: 05601840-00

Special Order: No Guaranteed ETA

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiast nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. This is Step 2 in Schrick's line of performance cams. The 284 degree cam will be great for owners who want to retain their driveability on the street and only need a modest boost in top-end RPM. Schrick recommends replacing the valve springs with high-performance springs for this application.

Show More Show Less

Schrick Valve Spring Set - E30 325i M20 engine

T#:4791

Part#: 005602022-062

Ships on Nov 6, 2026

$ 917.99 USD

Add to Wish List

Qty

$ 917.99 USD

Add to Wish List

This Schrick valve spring set includes both the inner and outer valve springs for BMW's with the M20 6 cylinder engine. Designed for use with 272-284-288 degree camshafts. It is important to use Schrick Valve springs when installing camshafts with higher lift.

This item fits the following BMWs:
1987-1991 E30 BMW 325i 325ic 325is 325ix
1989-1990 E34 BMW 525i

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 284 degree

T#:338235

Part#: 05601840-00

Ships on Nov 6, 2026

Starting at $ 479.00 USD

Add to Wish List

Starting at $ 479.00 USD

Add to Wish List

E30 325i, E34 525 (M20) 284 degree Schrick Camshaft. This is Step 2 in Schrick's line of performance cams. The 284 degree cam will be great for owners who want to retain their driveability on the street and only need a modest boost in top-end RPM. Schrick recommends replacing the valve springs with high-performance springs for this application.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

BMW M30 6 Cyl. 284-Degree - Motronik- Camshaft

For Vehicles Equipped With Bosch Monotronik Only

T#:349964

Part#: 002201840-04

Special Order: No Guaranteed ETA

$ 1,191.99 USD

Add to Wish List

Qty

$ 1,191.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - Duration Exhaust - 280 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 7 Cam Lobe Lift Exhaust - 8, 6 Valve Lift w/o Valve Clearance Intake - 10, 9 Valve Lift w/o Valve Clearance Exhaust - 10, 8 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

Schrick Camshaft - E24 633/635, E28 533/535 E34 535i - 284-deg ...

T#:338214

Part#: 002201840-04

Back Ordered

Starting at $ 1,659.87 USD

Add to Wish List

Starting at $ 1,659.87 USD

Add to Wish List

German-made Original Schrick performance camshaft for M30 engines in 1984-up E24 635CSi, E28 533i/535i / 535is, and the E34 535i. This camshaft has a bit more duration and higher lift than the stock cam for improved top-end performance.

Cam Specs

Cam Lift (Valve Lift) I/E (mm)	Duration CRA Intake/Exhaust Peak Timing	Valve Timing CRA IO-IC-EO-EC	Valve lift at TDC I / E (mm)	Valve clearance I / E (mm)	Recommended valve springs
8.7/8.6 (10.9/10.8)	284/280/110	32-72 70-30	1.9 / 1.7	0.25 / 0.25	1982-1984: 000202090 1985-1993: 005602022 (inner) 005602062 (outer)

Schrick Technical Information / Specs

Note: this camshaft is designed to work on the "bolt-on" style distributor rotor. Some cars produced before 1985 with the "slide-on" style rotor require adaptor #11311288027.

Applications:
1984-1989 E24 633CSi, 635CSi
1984-1988 E28 533i 535i, 535is
1989-1993 E34 535i

Show More Show Less

Febi Eccentric Bolt - E12, E21, E23, E24, E28, E3, E30, E32, E34, E9 ...

We Price Match - Give Us A Call or Chat!

T#:382364

Part#: 11331744355

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Used on rocker arm eccentric

Febi Hydraulic Lifter - E30, E32, E34, E36, E38

We Price Match - Give Us A Call or Chat!

T#:382358

Part#: 11321734341

Ships on Oct 16, 2026

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

Replaces noisy or stuck lifters

Hydraulic Valve Lifter - E36 325i, 318i, E34 525i M42, M50

We Price Match - Give Us A Call or Chat!

T#:381745

Part#: 11321739299

Special Order: No Guaranteed ETA

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Febi hydraulic valve lifter for the M42 and M50 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the M50 camshafts. This item fits the following BMWs: 1992-1995 E36 BMW 318i 318is 318ti 318ic 325i 325is 325ic 1993-1994 E34 BMW 525i

Show More Show Less

Exhaust Valve for 1993-2000 3-series (M50, M52, M52TU)

We Price Match - Give Us A Call or Chat!

T#:1618

Part#: 11341739821

Special Order: No Guaranteed ETA

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replacement exhaust valve in the stock size. Fits all VAN0S versions of the M50/M52/M52TU, including 1993-2000 323, 325, 328 and the E36 M3 3.0/3.2. Also fits E39 528 and Z3 2.3, Z3 2.8, MZ3 (S52 3.2), M Roadster, M Coupe.

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

Show More Show Less

Febi Rocker Arm Shaft Plug - E28, E30, E34

We Price Match - Give Us A Call or Chat!

T#:381746

Part#: 11331264519

Ships on Oct 16, 2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

4 required per vehicle

BMW M20 6 Cyl. 288-Degree - Camshaft

T#:26638223

Part#: 005601880-00

Special Order: No Guaranteed ETA

$ 1,189.99 USD

Add to Wish List

Qty

$ 1,189.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 288 Duration Intake @ 1mm - Duration Exhaust - 288 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 3 Cam Lobe Lift Exhaust - 7, 3 Valve Lift w/o Valve Clearance Intake - 11, 4 Valve Lift w/o Valve Clearance Exhaust - 11, 4 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M30 6 Cyl. 282-Degree - Monotronik- Camshaft

For Vehicles Equipped With Bosch Monotronik Only

T#:26638228

Part#: 002201820-01

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW S38 6 Cyl. 280-Degree - Camshaft

T#:136

Part#: TMS136

Ships on Nov 6, 2026

$ 3,999.99 USD

Add to Wish List

Qty

$ 3,999.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S38 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 280 Duration Intake @ 1mm - Duration Exhaust - 280 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 11 Cam Lobe Lift Exhaust - 11 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 35 Valve Clearance Exhaust - 0,35

Show More Show Less

Schrick Camshaft - E30 325i, E34 525 (M20) 304 Degree & Valve Springs...

T#:343814

Part#: 05601040-00KT

Ships on Nov 6, 2026

$ 1,489.99 USD

Add to Wish List

Qty

$ 1,489.99 USD

Add to Wish List

BMW M20 6 Cyl. 272-Degree - Camshaft

T#:26638221

Part#: 005601720-00

Special Order: No Guaranteed ETA

$ 1,274.99 USD

Add to Wish List

Qty

$ 1,274.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 272 Duration Intake @ 1mm - Duration Exhaust - 272 Duration Exhaust @ 1mm - Intake Peak Timing - 111 Exhaust Peak Timing - 111 Cam Lobe Lift Intake - 7 Cam Lobe Lift Exhaust - 7 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

Schrick 05601720-00~SHK M20 2.5L

T#:348282

Part#: 05601720-00

Special Order: No Guaranteed ETA

$ 1,129.99 USD

Add to Wish List

Qty

$ 1,129.99 USD

Add to Wish List

For over 40 years, Schrick has been a pioneer in engine performance, crafting top-quality camshafts trusted by BMW enthusiasts worldwide. Their commitment to excellence is evident in the development of camshafts suitable for both street and track use, constructed from premium materials for unparalleled strength and precision. With a focus on innovation, Schrick has established itself as a leader in engine testing and manufacturing technology. Upgrade your BMW with the 272-degree Schrick Camshaft, offering a significant performance boost over stock cams. Experience enhanced horsepower at higher rpm ranges, where the stock engine may lack vigor. This "street" camshaft maintains low-end torque, ensuring a balanced performance across all speed ranges. For optimal results, Schrick recommends pairing this camshaft with upgraded valve springs.

High-quality camshafts for BMW enthusiasts
Boosts horsepower at higher rpm ranges
Maintains low-end torque for balanced performance
Crafted from premium materials for strength and precision
Recommended for use with upgraded valve springs

Show More Show Less

BMW M20 6 Cyl. 304-Degree - Camshaft

T#:394432

Part#: 005601040-00

Special Order: No Guaranteed ETA

$ 1,189.99 USD

Add to Wish List

Qty

$ 1,189.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 304 Duration Intake @ 1mm - Duration Exhaust - 304 Duration Exhaust @ 1mm - Intake Peak Timing - 105 Exhaust Peak Timing - 105 Cam Lobe Lift Intake - 7, 7 Cam Lobe Lift Exhaust - 7, 7 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less