Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation. Access Secret Premium Dashboard

These are the factory BMW wheels that were optional on the E85 Z4 3.0i Roadster. Their sizing and offset makes them a direct fit to the E46 and other models. What makes these wheels stand out is their curved concave dish that makes them look larger than their 18" diameter. This is a staggered set in the factory sizes and offsets - 18x8.0" and 18x8.5". These are a direct fit upgrade for all E46 models and will also look great on other chassis as well (see fitment notes).

Z4 Ellipsoid Wheel Set includes -
2 x 18x8.0" ET47 Ellipsoid Style 107 front wheels (BMW #36116758192)
2 x 18x8.5" ET47 Ellipsoid Style 107 rear wheels (BMW #36116758193)
4 x BMW wheel center caps (BMW #36136783536)

These are relatively high offset wheels so wheel spacers will be required on other models. Enter your car info for more specific info. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail.  

ECS Titanium Wheel Bolts

Elevate your vehicle's performance with ECS Titanium Wheel Bolts, designed for weight savings and exceptional quality. These bolts, CNC'd from annealed titanium alloy, are 50% lighter than steel bolts of the same size, reducing rotational mass for improved performance.

Tested to class 10.9 fastener proof load requirements, these bolts exhibit exceptional durability without any signs of fatigue or failure. Featuring specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, a 17mm head, and a conical seat, they ensure precise fitting and reliable performance.

Benefits:

• 50% lighter than equivalent steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for exceptional durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• High-quality, rust-resistant construction
• Precision fitment with specifications of 12mm diameter, 1.5mm thread pitch, 26mm length, and a 17mm head

Prior to installation, ensure thorough cleaning of hub threads to remove zinc traces from previous wheel bolts to prevent fatigue and cracking of the titanium alloy.

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

• Material: Made from durable aluminum for long-lasting performance
• Design: Engraved APR logo adds a distinctive look
• Finish: Gunmetal color enhances the visual appeal of your wheels
• Set Includes: 4 valve stem caps for a complete upgrade
• Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

• 75MM, 85MM, or 95MM LENGTHS
• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (red Turbo-Lock or similar).

Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

MSI Racing specializes in hardware for motorsports and other advanced industries and their wheel studs are some of the very best in the professional motorsports world. MSI is already a major supplier to teams in the top NASCAR categories and we tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well. These studs are available in multiple lengthsand all sizes are made with aircraft quality material and have roll formed threads. The coating is a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. This coating process reduces friction and wear to prevent thread galling. Another benefit is that these have the best corrosion resistance we have seen in any wheel stud! A dry lube stud has the most corrosion resistance than a plain black coating because the lube is applied over the black phosphate coating. Salt tests have shown this stud is superior to others in corrosion resistance. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations.

These studs are the perfect choice for endurance racers, sprint racers, track-only cars, or even hardcore street cars. The bullet nose on this stud is deeper than other studs we have used. More of the stud protrudes through the open nut so that everything lines up better on the threads. This helps to eliminate the possibility of cross-threading or thread stripping. In addition, the shank has been machined for proper brake rotor alignment. The dry lube helps the nut engage and glide over the threads for faster pit stops without cross threading or binding.

Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

Sold per stud.
Wheel nuts sold separately.

ECS Tuning proudly presents extended wheel bolts, available individually or matched with our spacers to ensure precise fitment. These bolts adhere to the stringent ISO 898 class 10.9 standards, guaranteeing exceptional mechanical and physical properties. Lab-tested to confirm class 10.9 compliance, they meet rigorous requirements for material properties, hardening, and proof load strength.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 32mm

Note: For wheel spacer installation, add the spacer size to the OE wheel bolt's length for accurate fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)

E36 M3 ECS Performance Adjustable Coilover System

This brand new BMW Coilover line from ECS Tuning was designed with daily drivers in mind! Their focus was to improve on the performance and look of the suspension, without forgoing any comfort. Like many of the top tier coilovers, these coilovers feel as smooth and comfortable as a stock setup, while giving you an aggressive look and vastly improved handling, all at a fraction of the price!

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 6kg/mm, Rear is 8kg/mm

PERFORMANCE FEATURES

32 levels of rebound damping adjustment Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height PRODUCT DESIGN

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity Threaded portions are are clear zinc coated for optimum corrosion protection against rain and salt Coil springs are powder-coated Reflex Silver Metallic finish for durability Red anodized, billet aluminum lower spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches Integrated bump stops PRODUCT DEVELOPMENT

In-house designed to give your vehicle superior handling performance, long term corrosion protection and fully adjustable ride-height, we set out for a coilover system that is made for THE enthusiasts! Installed and evaluated in-house by our Product Development team in our Wadsworth, Ohio facility, we ensured a high level of precision and quality is delivered throughout thousands of miles of long term product testing. Wheel Spacer "Flush Kit" - Black - E36 M3

Transform your M3's stance with the ultimate Flush Kit! Our flush kit is expertly crafted to ensure OEM factory wheels sit perfectly in line with your vehicle's arches. Forget the trial and error of achieving an aggressive look—our team has precisely calculated the ideal spacer combination for flawless fitment, functional enhancement, and superior aesthetics.

From the factory, BMW wheels often sit inset of the wheel wells, leaving enthusiasts seeking a bolder, more "flush" fender-to-lip alignment. We've set out to solve this issue through extensive testing, discovering a strategic mix of 17.5mm front and 5mm rear spacers provides the perfect solution. Not only does our kit enhance your BMW’s visual appeal, but it also maintains optimal tire clearance, eliminating the risk of rubbing, even on tight turns.

Key Benefits of Turner Motorsport Wheel Spacers:

Hub-Centric Fit: Ensures seamless, vibration-free alignment with factory hub specifications. Precision Engineering: CAD-designed and CNC-machined for unmatched accuracy and consistency. Enhanced Pad Surface: Extra-wide 156mm pad versus standard 150mm for added stability. Aerospace-Grade Aluminum: Delivers high strength without compromising weight. Military-Grade Black Hardcoat: Protects against corrosion and wear, extending durability in all conditions. Quick Release Pockets: Simplifies removal, making brake servicing faster and hassle-free. Unleash a powerful new look for your E36 M3, achieving a refined yet aggressive stance with engineering that you can trust.

OEM Wheel Fitment with the Turner Motorsport E36 M3 Flush Kit:

Style 23 (M-Contour): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Style 24 (M-Round Spoke Type II / LTW): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Style 39 (M-Double Spoke Type II): 17x7.5 ET41 Front, 17x8.5 ET41 Rear Note: Vehicles with modified ride height/suspension geometry may require rolling and/or pulling of factory wheel arches for use with the Turner Motorsport "Flush" Fitment Kit.

ECS Tuning Extended Wheel Bolts for Precise Fitment

Enhance your vehicle's wheel fitment precision with ECS Tuning's extended wheel bolts, designed individually or paired with spacers to ensure accurate compatibility. These bolts are engineered to meet the rigorous ISO 898 class 10.9 standards, ensuring exceptional mechanical and physical properties, including stringent material, hardening, tempering, and proof load strength criteria. Our fasteners undergo lab testing to guarantee compliance with class 10.9 requirements.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 45mm

*For proper fitment when using wheel spacers, add the spacer size to the length of the OE wheel bolt (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 42mm Length Bolt)