Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless Steel brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Introducing our newest upgrade for your E36: a full billet aluminum valve cover engineered to eliminate factory and aftermarket valve cover issues. If you're familiar with our new Turner Motorsport products for 2023 and 2024 you can tell that our engineering team at Turner has a focus on older chassis, especially the E36.

Our valve cover is designed to fit some of the best engines BMW ever came out with, single vanos M50/M52 and S50/S52. Not only are these great motors in general and deserve an upgraded valve cover but they are also prime for boosting. When adding boosting you will be introducing heat which can wreak havoc on your ignition system and make your factory valve cover extremely prone to failure.

The reality of the M5x/S5x motors is that the plastic valve covers are sub-par and the magnesium versions are no longer available from BMW and even those can even warp. You can end up replacing your valve cover time and time again dealing with issues if you prefer but the option is here for you. The last valve cover you buy for your E36.

Our engineers designed this valve cover with experience and personal passion that offers a plethora of benefits for your M5x/S5x motor. Whether you plan to cherish your E36 for years to come or envision a turbocharger upgrade, our valve cover is the ultimate solution. It boasts rugged durability and brilliant aesthetics, ensuring it's a perfect fit for any enthusiast.

Featuring full 6061 billet construction and a type-3 hard coat finish, our valve cover is built to endure extreme conditions and rigorous use. Whether you opt to retain your factory PCV setup or upgrade to a catch can for racing purposes, the cover provides dedicated, direct-fit ports for both configurations.

The base kit includes all the necessary components for a seamless installation. Additionally, the description provides part numbers for optional replacements and add-ons, ensuring you have everything you need to complete your install.

Features:

Integrated -10AN ORB ports for a catch can setup to keep your intake free from oil in racing applications
Compatible with factory M5x/S5x ignition coil packs
Compatible with Red Top "Smart Coils" (Audi R8) for standalone ECU applications
Stainless steel coil pack heat shield for enhanced protection in factory and top mount turbocharger applications
Compatible with factory oil cap
Modular heatshield with bendable tab to accommodate 96-99 coil harness that crosses over the top of the exhaust manifold
Online instructions included for PCV, heatshield and coil pack installation
Benefits:

Leak-free - Never deal with a warped valve cover again thanks to the full billet aluminum construction
Retains all factory PCV functions
Protected ignition coils and wiring
Superior heat resistance - Will not melt like plastic replacement valve covers
Durable and clean anodized coating able to withstand excessive engine and exhaust temperatures
Optimized oil path for vanos/timing chain lubrication
Design:

Full 6061-T6 Billet Aluminum
Type 3 black hard coat for increased durability and thermal capacity
Compatible with all Single Vanos M5x/S5x engines
Heat shield with black anodized Turner back plate for a clean and durable finish
Designed to utilize M50/S50 valve cover gasket - fits all M50, M52, S50, S52
Kit options:

The base kit includes:
Billet Valve Cover
Heat Shield, PCV Adapter - QTY 1
-10AN ORB Block-Off Fittings - QTY 2
M50/S50 Valve Cover Gasket Set
Valve Cover Securing Hardware Grommets - QTY 15
Ignition Coil Install Hardware (M6x1, 25mm length) - QTY 12
Heat Shield Install Hardware (M6x1, 12mm length) - QTY 4
Optional Ignition Coils
PCV options:

There are different PCV connections based on year splits for M5x/S5x motors. If you have a damaged or worn-out PCV component please reference the replacement component that matches your motor.

(1995 Only) Valve cover breather connector - P# 11151703710
(1996-1999) Replacement oil separator hose - P# 11151703775
Looking for catch can and or AN lines and fittings?

Right angle catch can feed/return lines - T#26493912
Feed/Return line separator - T#26493913
Universal catch can kit with mounting - T#398786

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Experience a modern interpretation of LTW styling with our latest creation. Inspired by the classic E36 lightweight, and crafted with precision by our expert engineering team at Turner, we proudly introduce our carbon LTW spoiler, setting a new standard in the industry. Carefully crafted with a multi-piece carbon design, our spoiler is not just an accessory; it's a work of art featuring a flawless glass-like finish and perfectly matched carbon weave.

As fellow enthusiasts, we understand the importance of preserving the integrity of E36s and their components. With iconic colors like Techno Violet, Boston Green, and Estoril Blue in mind, we refuse to compromise the original trunk and paint with traditional drilling methods. Instead, our carbon LTW spoiler features an innovative fastening system that requires no modifications and preserves your car's pristine showroom finish. With precision-engineered billet clamps and high-quality 3M double-sided tape, installation is a breeze, requiring only basic hand tools. No drilling is necessary.

Research and development:

We feel it is crucial to share our journey into the design and engineering that went into developing this remarkable carbon spoiler. The development of this LTW spoiler was not a quick process; it spanned over three years. Throughout this time, we dedicated ourselves to refining, testing, and making adjustments to craft a spoiler that we're thrilled to introduce to the community.

From perfecting the form and fitment to ensuring the spoilers's stability, every aspect of this project presented significant challenges. This carbon spoiler is comprised of 5 components, the base spoiler, 70mm risers, upper spoiler, gurney flap, and most importantly the mounting brackets.

Anyone familiar with carbon fiber knows the difficulty of working with these nearly 50-inch wide pieces to achieve straightness without flex while maintaining a consistent carbon weave pattern. During the initial stages of carbon testing, the manufacturing process proved to be nothing short of impossible. Issues such as carbon fiber twisting during curing, waviness in the exterior appearance, and mismatched carbon weave posed significant hurdles.

Furthermore, ensuring precise fitment was paramount. Not only did the spoiler components need to seamlessly integrate with the trunk gaps, but they also had to clear adjacent body portions without error. We underwent rigorous testing, cycling through five sets of carbon spoiler prototypes before achieving a result that met our exact standards.

Numerous adjustments were made throughout the project, including modifications to the carbon composition, bracketry, and the incorporation of gaskets between carbon layers. Our passion and dedication were poured into every aspect of this product.

Throughout the project timeline, we conducted extensive long-term testing on various vehicles, subjecting the spoiler to speeds beyond what can be publicly disclosed. When we say these spoilers are secure, we mean it. Utilizing both 3M double-sided tape and four billet brackets with a total of eight fasteners, this spoiler can be confidently installed. The billet mounting brackets are designed to fasten over the top of the factory seam sealer on the underside of the trunk for maximum stability. Near the end of testing, we decided to add an adhesive-backed gasket to the underside of the base, providing yet another layer of paint protection.

Styling:

The greatest part we have enjoyed over this project is the versatile style of the spoiler as designed. If you have read this far into our development process we can say strongly that you are a car enthusiast, well so are we. As car enthusiasts we can never leave the car alone, changing setups and most importantly styling. With the multi-piece design, the option to change up your look is just moments away with a little help from some hand tools.

Initially, we were fully committed to running the complete setup: full height, 70mm risers, and gurney flap – all inspired by the LTW look with a modern carbon twist. However, as we spent more time with the spoiler, our perspective shifted. We decided to remove the 70mm risers and suddenly rediscovered our love for the E36's original aesthetic. Without the risers, the spoiler took on a new, understated elegance, blending seamlessly with the car's overall design.

Time passed, and we began to explore other options. Removing the gurney flap toned down the race car vibe, revealing yet another layer of the spoiler's versatility. Each subtle alteration brought about a significant change in style, proving that even the smallest adjustments could make a world of difference.

Our journey with the spoiler was one of constant evolution; from full-on LTW racing aesthetics to more understated styling and back again. This flexibility was the true beauty of our creation, keeping us engaged and dedicated throughout the rigorous development process.

What is an E36 M3 LTW?

In 1995, North America received a special gift: 126 production units of the E36 M3 Lightweight, also known as the "LTW." This limited-production, track-focused E36 was equipped with a range of features, including lightweight body panels, a stiffer suspension, upgraded brakes, and, notably, a distinctive style that served as functional aerodynamic enhancements.

Among its various enhancements, the exterior held the most distinctive features. Available exclusively in Alpinaweiss paint paired with an M-colored checkered flag, this car featured an adjustable front splitter and an optional high-rise spoiler. These elements not only contributed to its iconic appearance but also solidified its place in history as one of the most iconic-looking E36s to ever hit the market.

The LTW entered the states as a "spec" car; bare-bones, lightweight, and ready to hit the track straight out of the box. Alongside the track-focused vehicle came optional components separately packaged in the trunk. These included a front strut brace, chassis x-brace, deeper oil pan with a dual pick-up pump, and, last but not least, the GT rear spoiler (let's face it, it's an LTW spoiler). Interestingly, these components actually voided the warranty because they lacked DOT approval (maybe not the coolest aspect).

Overall, this package represented the epitome of coolness at the time, perhaps even among the coolest offerings directly from the manufacturer, ever.

How can Turner give you the LTW experience?

Over the years we have subconsciously engineered a full LTW package with our own spin on it to make your own LTW-esque E36. Among the upgrades, we have made an adjustable splitter kit packed with LTW styling(T#1871611), billet x-brace(T#4056343), street/track adjustable rear camber arms(T#304099), upgraded sway bars(T#359704), tubular race control arms(T#4524483), and many more suspension, engine, and exterior enhancements. The full suite of performance and aesthetic parts were not made in conjunction with one another; rather, it emerged from our enthusiast-driven desire to capture the track-focused essence of the LTW and apply it to our own E36s.

Carbon LTW Spoiler Features:​

Motorsport styling
Aesthetic versatility, 4 optional spoiler configurations
Clamp-on design, no drilling required
Installs with simple hand tools
Completely reversible
Product design:

LTW-style design inspired by the iconic E36 M3 Lightweight (LTW)
Crafted from hand-laid 2x2 carbon fiber
High-gloss resin exterior with UV stabilizer
Mounts with 3M double-sided adhesive tape and 6061-T6 billet brackets
Kit Contents:

Base spoiler (Coupe)
70mm risers
Upper spoiler
Billet mounting brackets
Gaskets
Hardware for use with and without risers
Online installation instructions
Product development:

Our LTW spoiler is designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer e30, e36, and e46 owners similar levels of handling precision and control for the track and street, but weren’t satisfied with the other options out there.  Instead of a Delrin® bushing or unsealed spherical bearing alone, we selected an oversized sealed greaseable spherical monoball to offer unparalleled durability and precision, but designed a Delrin® adapter sleeve to help isolate the added noise, vibration, and harshness that a full solid monoball bearing will have. While race-ready, our hybrid Delrin®/monoball control arm bearings are more at home on the street than other kits that are advertised as “race-only” bearings. We did extensive street, autocross, and track testing to ensure the spherical bearing used in this bushing design excelled in each setting.

The stock rubber bushings, even those found in the M3, allow significant fore/aft movement of the front wheels to help absorb road impacts, especially when being pushed hard.  This soft flexible design maximizes daily driving comfort, but also allows considerable alignment change.  This unwanted deflection stands between you and a crisp, confidence-inspiring driving experience.  The advantage of a monoball bearing is that it will not deflect under load, eliminating all unwanted deflection while still allowing complete freedom of movement in the desired angles. What you get is superior steering precision with better handling from more consistent alignment and direct braking feedback, with exceptional service life.  Thanks to the Delrin® insert and double lip seals, there's none of the extra noise or reduced service life often found on other spherical bearings.

In short, if you're seeking front control arm bushings that offer precise, predictable handling, crisper braking feel, with a long service life free from noise - look no further. We have you covered.

Watch to learn more about Turner Monoball Bushings

Features:

Bearing housing

• Precision CNC machined from 6061-T6 blue anodized aluminum with a pre-installed grease fitting and grease distribution channels making this a serviceable design
• Knurled for smooth press fit in a wide variance in “lollipop” dimensions. Want front control arm monoballs pre-installed in lollipop brackets? Click here. 

Bearing

• A high quality sealed bearing with Delrin® inserts. Delrin® was chosen due to durability under pressure, while still soft enough to create a perfect play-free fitment on the control arm.
• Replaceable for infinite service life - no need to replace the entire mount in the event a bearing happens to fail.

Includes new hardware. Grease before installation and with each oil service with high quality Moly grease for maximum service life. Need a grease fitting tool?

Installation is relatively easy - see our instructions here.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

If allowed in the rules these solid aluminum transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).

Product features and benefits:

• Crisper throttle response, positive shifter location, direct power transfer
• Precision machined billet 6061-T6 aluminum housing
• Grade 10.9 stud - fear not, big turbo owners
• Engineered in-house and made in America

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe ​

Our new E36 Axle Back Exhaust is a versatile exhaust offering a number of options for E36 owners. With the factory exhaust you can upgrade to having valve control for different tone and volume options on the fly. For the fully upgraded or turbo owners this exhaust features a 2.0" to 3.0" exhaust pipe conversion and full 3.0" valved muffler that can be used with a custom full 3.0" exhaust.

When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.

Our Valved exhaust was designed specifically for your E36 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.

Our Turner axleback features dual 2.0" to 3.0" adapter that connects directly to your factory mid-pipes. From the adapter is full 3.0" exhaust piping with a smooth flow path to lower back pressure which leads to increased performance and a smoother exhaust tone. The 3.0" rear exhaust section flows into a full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.

New in 2023 you have two new options for E36 exhausts, our Turner valved and non valved axle back exhaust setups. With our Non Valved Axle-Back you achieve a happy medium of volume and tone but without the ability to adjust the volume. Our Valved Axle-Back is another variation and a true weapon, not only does it have the option to fit to your factory exhaust system but it is also the clear option for those looking to make a full 3.0" exhaust. After putting together the front 3.0" exhaust section you can assemble it with our Turner Valved Axle-Back for not only a full custom 3.0" exhaust but also have the luxury of volume control all with perfectly paired integrated 90's styled exhaust tips that fill out the rear valance with perfect proportions.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

Features and Benefits:

Adjustable exhaust volume
Improved flow
Dual 2.0" to 3.0" exhaust adapter
3.0" Pipe diameter (great to utilize with 3.0" turbo back while having volume control!)
Lightweight (28lbs!)
Retains factory emissions
Utilizes factory exhaust hangers
Compatible with M3 and replica M3 rear bumpers
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.5"-3.0" Stainless Steel Mandrel Bent Tubing
Sheet metal mounting brackets to utilize stock mounting locations
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Designed for smoother flow path and less backpressure
Kit Contents:

Dual 2.0" to 3.0" adapter
3.0" mid pipe section
Full 3.0" turbo-style valved muffler with integrated tips
Valve controller with installation kit and 2 key fob controllers
Clamps and hardware for installation

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S50 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

The 6-speed Getrag 420G transmission, found in the European E36 M3 Evolution and E46 M3, has become an increasingly popular swap amongst E36 owners. Its increased strength, longevity, and overdrive sixth gear make it a great choice for both track cars and daily drivers. Unfortunately, many of the components needed to complete this transplant have become hard to source. Despite increased demand from enthusiasts, BMW has blocked the sale of European E36 M3 parts into North America.

With this in mind, our team of engineers went to work designing a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, our replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and our Double-Adjustable Short Throw Shifter Kit (T#557266).

Features & Benefits:

6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components Confirmed compatibility with the Turner Motorsport Double-Adjustable Short-Throw Shifter Kit (T#557266) Product Development:

Our E36 420G Shifter Arm was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.