BMW Suspension Parts for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Mubea Rear Coil Spring - E46
For convertible models only
Mubea - Corporate Logo
T#:383172
Part#: 33532283137
In Stock
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping
Replace your cracked springs

Eibach - Corporate Logo
T#:362041
Part#: 2072140
In Stock at Vendor
10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD
10% off MSRP
$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

  • Front - .9"
  • Rear - .6"
Show More Show Less

Rogue Engineering - Corporate Logo
T#:50837389
Part#: RE.RBE46
Ships on Aug 28, 2026
New Item
$ 379.00 USD
Free Shipping on orders $49 and up
$ 379.00 USD
Free Shipping on orders $49 and up
Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:12643107
Part#: RE.899
Ships in 9 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up
An integral part on E46 M3 is the rear chassis "V-Brace" (BMW # 33312229899) found on all 2001-06 Convertibles and Coupe (including the CSL). This brace attaches to the outward points of the rear chassis and to the area near the rear subframe carrier. Since some of these vehicles are now over 20 years old, we have been seeing more and more of these start to rust away. We began studying the OEM part, curious as to why they were starting to rust away. We found that the two arms of the "V" are made from 38mm x 12mm (1.5" x 0.5") hollow square steel tubing, pressed ends and welded to a junction plate joining them with welds holding the arms at a specific angle. Since the arms are hollow, it helps keep the overall weight down, but does little to prevent corrosion since it is difficult to paint/coat a hollow tube. A Google search turned up very little other than used ones on eBay and new ones that turned out to be in short supply from the BMW dealer (not surprising since the car is over 20 years old). Determined to make something better, we began our engineering and R&D process. Goals of our Design; Modular design, since packaging and shipping something this large would probably be too expensive Costs would dictate material and manufacturing methods Lighter weight would be a secondary (or tertiary) goal, but also keeping in mind costs Corrosion resistant, so it would not rust from the inside out, like the OEM version After weighing the material, manufacturing and cost options, we decided to go with a fully CNC'd ACQ 6061-T6 aluminum assembly. The concept is to machine two identical arms (one part number) and have them joined with a "junction plate". The arms would be secured to the plate with Grade 8.8 grade hardware and the entire assembly would include replacement Grade 10.9 hardware to replace the original OEM hardware (which is probably original). Details of our Design; CNC'd 6061-T6 construction, secured with Grade 8.8 socket head cap screws. Included are replacement Grade 10.9 hardware to fit in the factory locations. About 4 lbs. fully assembled weight (vs. 6.25 lbs for OEM), about a 35% weight savings Anodized gray finish Modular design allows for one arm to be removed in case of exhaust removal requirement. Included in the Kit Two (2) arms of the brace assembly (they are idential) One (1) junction plate One (1) red spacer (this goes BETWEEN the brace and the chassis!) Two (2) blue spacers (these goes BETWEEN the brace and the chassis!) Four (4), M10 socket head cap screws Three (3), M10 flanged hex head bolts It is recommended that the holes used to mount the V-brace onto the car be cleaned before installation by running an M10x1.5 tap to clean each of the holes.
Show More Show Less

JT Design - Corporate Logo
T#:1386
Part#: JTD909-75-KIT
Ships on Sep 16, 2026
$ 32.00 USD
Free Shipping on orders $49 and up
The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
Show More Show Less
KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less

KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less

Rogue Engineering - Corporate Logo
T#:34885415
Part#: RE.ARCA.2.RE
Ships in 8 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
Mubea Rear Coil Spring - E46
For coupe models only
Mubea - Corporate Logo
T#:383171
Part#: 33532283136
In Stock
$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping
Replace your cracked springs
Mubea - Corporate Logo
T#:13200578
Part#: 31336767376
Ships on Sep 23, 2026
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping