Bilstein for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis

Bilstein B4 OE Replacement Shock and Strut Package - E46 M3
Bilstein - Corporate Logo
T#:380914
Part#: 22-199508KT1
In Stock
$416.00
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2001-2006 E46 BMW M3 (non competition package)

Bilstein B12 Pro-Kit Suspension System - E46 M3
Bilstein - Corporate Logo
T#:22131
Part#: 46-000613
On Order, ETA Jun 25, 2019
$965.00
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Bilstein B16 PSS10 Coil Over Suspension - E46 M3
Bilstein - Corporate Logo
T#:1588
Part#: GM5-C668-H2
In Stock
$1,955.00
$1,955.00

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

  • Largest available piston diameter for greater sensitivity and precise control.
  • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
  • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
  • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
  • Weather resistant coating to resist oxidization, and ensure long life.
  • Lighter weight reduces wear and tear on suspension components.
  • Wrenches to adjust front and rear ride height included!

This item fits the following BMWs:
2001-2006 E46 BMW M3


Bilstein B6 Performance FRONT RIGHT Strut - E46 M3 2001-2006
Bilstein - Corporate Logo
T#:2284
Part#: VE3-E211-H0
In Stock
$298.00
Free Shipping
Position: Front right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
2001-2006 E46 M3, M3 Convertible

Bilstein B6 Performance Shocks & Struts Kit -- E46 M3 2001-2006
Bilstein - Corporate Logo
T#:384737
Part#: 24-143998KT1
In Stock
$790.00
Free Shipping

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. The Bilstein B6 Performance Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.


This Bilstein B6 Performance shock package fits the following BMWs:

2001-2006 E46 M3, M3 Convertible

Bilstein B6 Performance FRONT LEFT Strut - E46 M3 2001-2006
Bilstein - Corporate Logo
T#:2283
Part#: VE3-E210-H0
In Stock
$298.00
Free Shipping
Position: Front left
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
2001-2006 E46 M3, M3 Convertible

Bilstein B6 Performance Rear Shock - E46 M3 2001-2006
Bilstein - Corporate Logo
T#:2222
Part#: BE3-E399-H1
In Stock
$97.00
Free Shipping
Position: Rear, left or right
Setting: Performance, for stock suspensions

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut and lower mount washer. The stock dust boot is re-used. Price is per shock.

Click here for important installation information.

This Bilstein B6 Performance rear shock fits the following BMWs:
2001-2006 E46 M3, M3 Convertible
Bilstein Coil Over Wrench - Pin Style - Small
Bilstein - Corporate Logo
T#:303265
Part#: E4-XS1-Z001A00
In Stock
$17.29
Free Shipping on orders $99 and up
Bilstein Coil Over wrench for some PSS, PSS9 and PSS10 kits. Small wrench for adjusting the spring perch and lock ring on coil overs that require the M-F round pin style of adjuster (not rectangular inter-locking adjuster). May also be used with other coil over kits (H&R, Moton, JRZ, etc) that use a similar adjuster.

Plastic Spring Isolator
Bilstein - Corporate Logo
T#:211202
Part#: 407544
In Stock
$1.21
Free Shipping on orders $99 and up
This plastic ring fits between the spring and spring seat and acts as a buffer, reducing noise, vibration, and wear on the spring seat. These are designed to take abuse as the spring moves on the seat and should be considered a consumable. These are plastic and isolate the spring from hitting the aluminum seat and making noise. This will also reduce wear on the spring seat. These are sized for the 60mm spring seat found on Bilstein, H&R, Moton, MCS, and other coil over kits. Priced per ring and such a simple but effective part you should never be without!

Bilstein Coil Over Spanner Wrench Set (Notch Style)
Bilstein - Corporate Logo
T#:1702
Part#: 19101X
On Order, ETA May 31, 2019
$19.90
Free Shipping on orders $99 and up
Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Lower Lock Ring (M52x1.5 Thread)
Bilstein - Corporate Logo
T#:211201
Part#: 411695
Ships on Jun 14, 2019
$13.52
Free Shipping on orders $99 and up
This is the lock ring that snugs up against the lower spring perch and prevent the perch from moving down (affecting the ride height). It's made from light weight aluminum and with a sprocket-type adjustment collar. This is a genuine Bilstein spring perch but should also work on H&R, Moton, MCS, and other coil over bodies with M52x1.5 thread size. These are sold per ring so order one per strut/shock.
Lower 60mm Spring Seat (M52x1.5 Thread)
Bilstein - Corporate Logo
T#:211200
Part#: 411694
Ships on Jun 14, 2019
$28.00
Free Shipping on orders $99 and up
This is the lower spring seat for a coil over strut body and a 60mm I.D. spring. It's made from light weight aluminum and with a sprocket-type adjustment collar. This is a genuine Bilstein spring perch but should also work on H&R, Moton, MCS, and other coil over bodies with M52x1.5 thread size. These are sold per perch so order one per strut/shock.


E46 M3 Bilstein Clubsport Coil Over Suspension
Bilstein - Corporate Logo
T#:16546
Part#: 48-213660
Back Ordered, Contact Us
$4,140.00
Free Shipping

The Bilstein Clubsport Coilover Suspension for E46 M3 provides maximum performance and adjustability for drivers who run their cars on the track to the limit yet also want a "streetable" suspension. The Clubsport shocks feature independent adjustment of both rebound and compression forces via the two aluminium adjustment knobs. The front adjustments are made from under the front strut; the rear adjustments are made from the top of the shock. With 10 settings for both compression and rebound there are up to 100 unique suspension settings to fine tune your E46 for a bumpy track, a billiard smooth track or the drive home.

The Bilstein Clubsport suspension is a TUV-certified, street-legal, high-end coilover package that is also designed for uncompromising use in racing, track days, and club racing. The suspension combines the tried-and-tested BILSTEIN mono-tube shocks with the highest levels of engineering from the field of motor sport. The 2-way adjustment system, with integrated reservoir, offers a weight advantage for racing use compared to systems with external reservoirs.

With 10 x 10 clicks, a wide range of handling characteristics can be created in just seconds, allowing for instant back-to-back set-up and testing. In combination with the adjustable motorsport uniball camber plates, it is possible to select the suitable setup for the respective track, weather conditions, vehicle weight, driver preferance, and tire characteristics. Rear monoball upper shock mounts are also included for a complete, bolt-in package.

This package is supplied with a base set of springs - 100Nm (571lb) front and 140Nm (800lb, progressive) rear. These are 60mm ID springs so changing spring rates or lengths to suit your setup goals is very easy! Turner Motorsport stocks many springs to fine tuning your suspension package.

The product advantages at a glance:

  • 100 setting variations can be manually selected with noticeable differences
  • Adjustment knobs for independent 2 way adjustment of both rebound and compression with clear indicators from 1 (soft) to 10 (hard)
  • Positive click resolution and color-coding: red for rebound force, blue for bump force
  • Simple setup changes in while installed without additional tools
  • Camber adjustment with uniball support bearing
  • Weight and installation advantages thanks to integrated reservoir
  • Quality racing springs made from highly durable material
  • Spring plates and lock nuts made from special aluminium alloy
  • Street-legal: German TUV certificate
  • Fine-tuned by BILSTEIN under real motorsport conditions
  • BILSTEIN mono-tube gas pressure technology from the field of motorsport.
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance

This coilover kit fits the following BMWs:
2001-2006 E46 BMW M3

Select Vehicle