BMW Engine Parts for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis
Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

OEM INA Idler Pulley - E34 E36 E39 E46 Z3 Z4 M5 M6
Ina - Corporate Logo
T#:1626
Part#: 11287841228
In Stock
$29.95
Free Shipping on orders $99 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The upper and lower idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley shares its mounting bolt with the alternator, and is used for the main drive belt on the M50-family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines), and also used on the S85 V10. This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item is 80mm Diameter. Please check the diameter before ordering.

Alternate part number: 11287841228

This upper idler pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i
1999-2000 E46 323i, 323Ci, 328i, 328Ci
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
2001-2006 E46 M3 coupe & convertible
2000-2006 X5 3.0 liter (E53 chassis)
2006-2009 M5 & M6 V10
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 & MZ4 Z4 M Coupe, Z4 M Roadster

Genuine BMW Gas Cap - Most BMWs 2000+
Genuine BMW - Corporate Logo
T#:2788
Part#: 16117222391
In Stock
19% off MSRP $31.40
$25.54
Free Shipping on orders $99 and up
19% off MSRP $31.40
$25.54
Free Shipping on orders $99 and up
This gas cap fits the model year 2000+ BMW E46 E39 E9X E82 E60 E63 E65 E83 E70 E71. This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2000-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006+ E9X BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3
2000-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 535i 535xi 545i 550i M5
2004+ E63 BMW 645ci 650i M6
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 750i 750li
2004-2011 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5 M X5 xDrive35d
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6 M
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2002-2006 R50 MINI MINI Cooper
2005-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
Turner Plug-and-Play IAT Relocation Kit
Turner Motorsport - Corporate Logo
T#:391751
Part#: 014579TMS
In Stock
Starting at $115.95
Free Shipping
Starting at $115.95
Free Shipping

All vehicles will lose some degree of performance due to heat soak under the right operating conditions.  Engine management systems constantly monitor operating conditions and modifying parameters based on sensor inputs. BMW integrated the intake air temp sensor in the MAF housing on models such as the E39 M5, and, being sandwiched behind a hot radiator and in some applications next to an even hotter valve cover, this is less than ideal for performance applications. Absorbing excess heat from its surroundings, the MAF can’t shed it fast enough, and the ECU reads an inaccurately high intake air temperature. Compensating for this false hot air measurement, the ECU pulls timing and runs a richer fuel mixture, resulting in a significant loss of torque.

What can you do?  Locate an intake air temp sensor in a location where it can properly measure incoming air temps and where it's less prone to heat soak. Mounting the sensor further away from the heat source and isolating it from the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly.  The result is you’ll experience reduced torque loss and more consistent power output when you’re pushing your engine hard. 

The Turner engineering team was initially skeptical of the claimed performance benefits of this modification. They first set out validate the functionality and performance benefit of a temp sensor relocation. Replicating stop-and-go traffic heat soak in a 2001 540i was a simple task in a controlled environment - their dynometer. First the car was heat soaked to simulate being stuck in traffic or moving at low speeds by running the car four times on the dyno with the dyno's cooling fans disabled. The fans were then turned on for three more runs to observe the recovery rate once air flow was reintroduced. The test: following this procedure once with a stock IAT, and once with their relocation kit in place. 

The result? Turner recovered 11lb-ft torque at 2500rpm through use of their relocation kit, with even greater recovery to be found for M5 owners. Here are the heat soak-related torque losses Turner experienced:

Stock IAT location:
18rwtq at 2500rpm
10rwtq at 3000rpm
9rwtq at 3700rpm

Turner IAT Relocation:
7rwtq at 2500rpm
5rwtq at 3000rpm
5rwtq at 3700rpm

**Click here for installation instructions**

The Turner engineering team designed a complete plug and play kit (unlike all other options on the market) that makes for quick, easy, and reversible installation. Weather-sealed connectors keep out the elements, while sheathed wiring offers a clean appearance underhood. With a harness nearly 3 feet long - the Turner IAT relocation kit offers flexibility in positioning, but not too long that you're left with unsightly excess wiring. Turner recommends positioning the sensor in a location away from engine heat, but still within the intake ducting to achieve accurate intake temp readings - such as the far side of the base of the airbox. Vehicles with cold air intakes with cone-style filters can even position the sensor in the end of the filter. Simply drill a hole in your (cool) location of choice and plug in the harness. More information including installation instructions and some good examples of sensor mounting locations can be found in our DIY PDF. 

We include everything you need to relocate your IAT, just select your desired sensor brand below - Genuine BMW or original equipment Beru.

Also the perfect plug-n-play option for anyone looking to upgrade their intake to utilize an Alpha-N tune!

Note for vehicles with M62 engine: applicable to 1999 and up


Rear Main Engine Seal - M54 S38 S54 M20 M30 M50 M52
Genuine BMW - Corporate Logo
T#:615
Part#: 11142249533
In Stock
25% off MSRP $44.18
$32.99
Free Shipping on orders $99 and up
25% off MSRP $44.18
$32.99
Free Shipping on orders $99 and up
This Genuine BMW updated rear main seal fits many BMW's. It is less likely to leak under "extreme" conditions. The E30 M3 tends to leak from the rear main seal.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5
1997-2003 E39 BMW 525i 528i 530i
1982-1989 E24 BMW 633csi 635csi M6
1981-1987 E23 BMW 733i 735i
2004-2006 E83 BMW X3 2.5i X3 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
2006-2008 Z4 BMW Z4 M Roadster M Coupe

Turner Motorsport Power Pulley Kit - E46 M3
Turner Motorsport - Corporate Logo
T#:340398
Part#: PPK-S54
On Order, ETA Jun 28, 2019
Starting at $269.95
Free Shipping
Starting at $269.95
Free Shipping
Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing 10hp on the E46 M3. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
ClickHere for example Dyno Chart

Click here for installation instructions.


This underdrive pulley kit fits the following BMW:
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 Z3 M Roadster / Z3 M Coupe (S54 engine)
BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$99.00
Free Shipping on orders $99 and up

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES


Turner Baffled Oil Catch Can Kit - 10oz
Turner Motorsport - Corporate Logo
T#:398786
Part#: 022798TMS01-09KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

IRP Performance Polyurethane Engine and Transmission Mounts - E36 E46
IRP - Individual Racing Parts - Corporate Logo
T#:401413
Part#: IRPEGS-2
In Stock
$199.95
Free Shipping

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

Solid mounts are great for an immediate transfer of power but allow for a ton of noise and vibration to be felt and heard in the cabin of the vehicle. This is great for the track where there aren't any issues with excess harshness, but as a daily driver, this can become an annoying pain in the neck.

The best middle ground is Polyurethane. Polyurethane is much stiffer than rubber and gives you the much stiffer feel you may be looking for. This allows for the increase in responsiveness, but isn't so extreme that it transfers all of the sound and vibrations into the cabin. This makes it much more comfortable for daily use while still reinforcing your driveline.

Features:

  • Aluminum and Polyurethane Construction
  • 80A Durometer Rating
  • New Hardware

OEM Lemforder Hydraulic Motor Mount - E36 E46 E9X Z3 Z4
Lemforder - Corporate Logo
T#:378218
Part#: 11812283798
In Stock
$53.95
Free Shipping

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles). OEM Lemförder motor mounts are the perfect replacement to prevent vibrations and knocks from continuing.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This motor mount / engine mount fits the following BMWs:
1995-1999 E36 BMW M3
2001-2005 E46 BMW 325xi 330xi (for left side only)
2001-2006 E46 BMW M3
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

In addition, this can be used as a motor mount upgrade for these models:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Turner Motorsport Oil Cooler Line Fitting Kit - E36 E46 E82 E9x
Turner Motorsport - Corporate Logo
T#:4229
Part#: TEN9910200
In Stock
$71.95
Free Shipping
Made in the USA NEW, updated design allows for more applications! The TMS Oil Cooler Fitting kit allows much more flexibility in the routing of oil cooler lines. Standard oil coolers utilize “hard lines” which can cause fitment issues for cars with superchargers, Accusumps, or other aftermarket performance parts. Our kit replaces the oil cooler hard lines with two TMS engineered -10 AN fittings, mounting bracket, and O-rings. Flexible braided hoses can then be run to the oil cooler which eliminates routing issues from supercharges, intakes, and other components. The brackets are CNC machined stainless steel and the -10 AN fittings are lightweight aluminum.

NEW REVISED Kit fits E36 Euro oil filter housing, E36 Euro oil cooler, E46 M3 stock oil filter housing, E46 M3 stock oil cooler , and works great with aftermarket oil coolers.

Clickhere for installation instructions.

-10 AN Oil Line Connector Kit BMW Applications:
2008+ E82 BMW 135i 1M Coupe - with factory oil cooler housing
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3- Euro oil filter housing (adaptable to US models), Euro oil cooler
2001-2006 E46 BMW M3 - US/Euro oil filter housing, US/Euro oil cooler
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan - with factory oil cooler housing
2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with factory oil cooler housing
2007-2012 E93 BMW 335i - Convertible - with factory oil cooler housing