BMW Intake Parts for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Genuine European BMW CSL Air Filter - E46 M3
For vehicles equipped with CSL style intakes only
Genuine European BMW - Corporate Logo
T#:383935
Part#: 13727838625
Ships on Apr 8, 2027
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Changing your air filter is a good idea every 30,000 miles. This is a replacement filter for S54 csl intakes
Genuine European BMW - Corporate Logo
T#:360706
Part#: 11617833645
Special Order: No Guaranteed ETA
$ 102.99 USD
Free Shipping on orders $49 and up
Genuine European BMW - Corporate Logo
T#:384517
Part#: 13417833597
Special Order: No Guaranteed ETA
$ 999.99 USD
Free Shipping
$ 999.99 USD
Free Shipping
This CSL Air rail is used to convert to the CSL air box or run an Alpha N and to accommodate use of a MAP sensor.

Genuine European BMW - Corporate Logo
T#:373305
Part#: 11617833496KT
Back Ordered
$ 11,737.98 USD
Free Shipping
$ 11,737.98 USD
Free Shipping

This is a Genuine BMW Euro CSL Intake Kit, one of the most sought after intakes in the European market! Included is everything you need to install this intake on your E46 M3's S54. Not only does this intake provide massive flow benefits and look amazing under the hood, the CSL intake also produces an amazing tone that can't be replicated by any other intake in the market!

This kit is specifically made for an E46 M3 with a Manual Transmission.

*A tune will be required to disable the MAF when installing this intake.

Show More Show Less

Genuine European BMW - Corporate Logo
T#:360707
Part#: 11617833646
Special Order: No Guaranteed ETA
$ 69.99 USD
Free Shipping on orders $49 and up
Genuine European BMW - Corporate Logo
T#:360704
Part#: 11617833497
Special Order: No Guaranteed ETA
$ 3,529.99 USD
Free Shipping
$ 3,529.99 USD
Free Shipping

Genuine European BMW - Corporate Logo
T#:360703
Part#: 11617833496
Special Order: No Guaranteed ETA
$ 5,921.99 USD
Free Shipping
$ 5,921.99 USD
Free Shipping
Genuine European BMW - Corporate Logo
T#:569148
Part#: 11618299520
Special Order: No Guaranteed ETA
$ 4,015.99 USD
Free Shipping
$ 4,015.99 USD
Free Shipping
Main section of the P54 race intake

Genuine European BMW - Corporate Logo
T#:373306
Part#: 11617833496KT2
Back Ordered
$ 12,548.99 USD
Free Shipping
$ 12,548.99 USD
Free Shipping
This is a Genuine BMW Euro CSL Intake Kit, one of the most sought after intakes in the European market! Included is everything you need to install this intake on your E46 M3's S54. Not only does this intake provide massive flow benefits and look amazing under the hood, the CSL intake also produces an amazing tone that can't be replicated by any other intake in the market! This kit is specifically made for an E46 M3 with an SMG Transmission. *A tune will be required to disable the MAF when installing this intake.
Show More Show Less

AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less


AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less