Home
Suspension
Control Arm Replacements & Upgrades

Packaged by Turner BMW Control Arm Replacements & Upgrades for BMW E46 M3 S54 (1999-2005)

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Control Arm Refresh Kits (2)

Sort By:

Turner Front Suspension Refresh Kit - Level 3 - E46 M3

T#:582916

Part#: T31122229453KT

Ships on Feb 11, 2027

Sale - Save 7% $ 1,999.99

This product was last offered at the strikethrough price on
06-18-2026

$ 1,852.07 USD

Add to Wish List

Qty

Sale - Save 7%

$ 1,999.99

This product was last offered at the strikethrough price on
06-18-2026

$ 1,852.07 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms & Bushings
Powerflex Performance Polyurethane Control Arm Bushings
Outer Tie Rods
Sway Bar End Links
Upper Strut Mounts & Reinforcement Plates
New Hardware

Show More Show Less

Basic Monoball Bearing Service Kit

T#:401616

Part#: 80402KT2

In Stock

Sale - Save 2% $ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

Qty

Sale - Save 2%

$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

This monoball service kit is designed to ensure long-lasting performance of your BMW suspension components by providing the correct CV-2 grease and a Schwaben snap-in grease gun nozzle—perfect for proper installation and routine maintenance at every oil change.

Show More Show Less

Front And Rear Suspension Refresh Kit

T#:15777299

Part#: 33172282484-KT

Ships on Feb 11, 2027

Sale - Save 5% $ 2,847.01

This product was last offered at the strikethrough price on
06-18-2026

$ 2,704.82 USD

Add to Wish List

Qty

Sale - Save 5%

$ 2,847.01

This product was last offered at the strikethrough price on
06-18-2026

$ 2,704.82 USD

Add to Wish List

Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering wheel, or sounds like squeaking, grinding or clunking. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 3 includes: 2 front control arms 2 front Polyurethane control arm bushings 4 sway bar end links 2 tie rod assemblies 2 strut mounts 2 strut mount reinforcement plates 2 Heavy Duty ECS rear shock mount reinforcement plates 2 rear upper control arm bushings 2 camber arm bushings 4 lower trailing arm ball joint 1 differential bushing 4 rear subframe bushings 4 ECS RTAB limiters 2 trailing arm bushings 2 rear shock mounts 2 rear shock mount gaskets

Project Cars

SELECT YOUR BMW

Packaged by Turner BMW Control Arm Replacements & Upgrades for BMW E46 M3 S54 (1999-2005)

Sub-Categories

Turner Front Suspension Refresh Kit - Level 3 - E46 M3

Basic Monoball Bearing Service Kit

Front And Rear Suspension Refresh Kit

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results