Turner Motorsport Power Steering Pulleys for BMW 3 Series E46 (1999-2005)

Turner Motorsport Power Pulley Kit - E46 325i, E46 330i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340397

Part#: PPK-E46-M54

In Stock

Sale - Save 15% $ 377.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 321.29 USD

Add to Wish List

Sale - Save 15%

$ 377.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 321.29 USD

Add to Wish List

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 5-10% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.

This underdrive pulley kit fits the following BMW:
2001-2006 E46 BMW 325i 325ci 325xi 330i 330ci 330xi

Show More Show Less

Turner Motorsport Power Pulley Kit - E46 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340398

Part#: PPK-S54

Back Ordered

Sale - Save 20% $ 412.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 330.39 USD

Add to Wish List

Sale - Save 20%

$ 412.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 330.39 USD

Add to Wish List

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing 10hp on the E46 M3. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
ClickHere for example Dyno Chart

Click here for installation instructions.

This underdrive pulley kit fits the following BMW:
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 Z3 M Roadster / Z3 M Coupe (S54 engine)

Show More Show Less

Turner Motorsport Power Pulley Kit - E46 323i/328i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340395

Part#: PPK-E46

In Stock

Sale - Save 27% $ 370.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 269.23 USD

Add to Wish List

Sale - Save 27%

$ 370.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 269.23 USD

Add to Wish List

Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER !

Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

* Alternator Pulley Options
Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).

Stereo Systems. We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.

Additional Info
Clickhere for example dyno graph

Click here for installation instructions.

This underdrive pulley kit fits the following BMW:
1999-2000 E46 BMW 323i 323ci 328i 328ci

Show More Show Less

Turner Motorsport Race Alternator Pulley For E46 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:388710

Part#: TEN4622RM3

In Stock

Sale - Save 34% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 143.53 USD

Add to Wish List

Sale - Save 34%

$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 143.53 USD

Add to Wish List

For use with the stock VALEO M3 alternator only Part of the process of building a proper race car is to delete and simplify portions of the wiring harness. This not only saves weight and reduces complexity, but it also allows you to run a smaller, lighter racing battery. So why is your alternator still charging at the original rate?!? This S54 racing alternator pulley underdrives the alternator more than our standard Power Pulley, freeing up horsepower and reducing alternator wear. This pulley is over 70% larger than the original stock pulley. With less electrical load, you don't need the original alternator output anymore. You can drive the alternator less and return that "lost" horsepower back to the engine. This part was developed and race-proven on our E46 Touring Cars. Because this pulley is so much larger than the original (70%), special care will need to be taken so that it does not interfere wtih other components on the engine - power steering lines, oil cooler lines, coolant hoses, etc. This pulley is strictly for race/track cars only, due to the size of the alternator pulley the proper voltage cannot be maintained at low RPM. This pulley must be used with our Turner Power Pulley or Turner Racing Pulley kits.

Show More Show Less

Project Cars

SELECT YOUR BMW

Turner Motorsport Power Steering Pulleys for BMW 3 Series E46 (1999-2005)

Turner Motorsport Power Pulley Kit - E46 325i, E46 330i

Turner Motorsport Power Pulley Kit - E46 M3

Turner Motorsport Power Pulley Kit - E46 323i/328i

Turner Motorsport Race Alternator Pulley For E46 M3

Select Vehicle

Category

Brand

Price

Narrow Results