Oiling System for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:
Oil Distribution/Sending Block Adapter - Allows For An Oil Pressure/temp
Oil Distribution/Sending Block Adapter - Allows For An Oil Pressure/t...
Bimmerworld - Corporate Logo
T#:1120864
Part#: 100.11.530.0003
In Stock
$ 110.99 USD
Free Shipping
Add to Wish List
$ 110.99 USD
Free Shipping
Add to Wish List

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

  • Mounts in stock oil pressure sensor location for easy installation
  • Allows use of up to two aftermarket sending units in addition to the factory sensor
  • Incorporates factory sending unit for utilizing the factory oil pressure light
  • Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
  • Includes banjo bolt and crush washers for secure installation
  • Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30
Show More Show Less
AAF M54 Breather Catch Can
AAF M54 Breather Catch Can
Advanced Auto Fabrication - Corporate Logo
T#:7608871
Part#: 116120
Ships in 3 Business Days
$ 195.99 USD
Free Shipping
Add to Wish List
$ 195.99 USD
Free Shipping
Add to Wish List
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. When you’re racing with an M54 and you want to control oil burn, installing an external catch tank is a great way to do it. The stock oil separator allows oil into the intake at sustained high RPM. This causes the intake runners, piping, and throttle body to be contaminated with oil and carbon build up. Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss. Includes all hardware and parts to make installation easy!
Show More Show Less
AAF Oil Pan Baffle - E46 M54
AAF Oil Pan Baffle - E46 M54
Advanced Auto Fabrication - Corporate Logo
T#:7608845
Part#: 11652
In Stock
$ 155.00 USD
Free Shipping
Add to Wish List
$ 155.00 USD
Free Shipping
Add to Wish List
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own M54 E46 Oil Pan Baffle. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. This baffle keeps the oil at the pick up better than others on the market. This pan features a tight fit with an extra tab on the front to keep oil from exiting under braking. Six gated holes control oil slosh in the sump. A must have for all track cars. Features and Benefits Track-proven to prevent oil starvation Directional trap door baffling completely that closes off the oil pump pickup for maximum protection against oil starvation during turning or acceleration Baffle plate with drain-back slots help accelerate return of oil to the bottom of the sump while also preventing oil slosh and reducing oil consumption Reduces the risk of oil starvation when oil levels are low Works with the factory cast aluminum oil pan, which is considered a structural member of the engine block and is less prone to failure or leaking than aftermarket sheet metal pans Light-weight aluminum construction Made In the USA **Note: Requires welding to install. Photos of installed baffle for reference.
Show More Show Less
Oil Filter Housing Gasket Replacement Kit - With Billet Drain-Back Valve - M50 M52 M54
Oil Filter Housing Gasket Replacement Kit - With Billet Drain-Back Va...
10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
Packaged by Turner - Corporate Logo
T#:59954869
Part#: 060233LA01KT2
Ships on Nov 30, 2026
New Item
Sale - Save 15% $ 367.99

This product was last offered at the strikethrough price on
11-07-2026

$ 312.00 USD
Free Shipping
Add to Wish List
Sale - Save 15%
$ 367.99

This product was last offered at the strikethrough price on
11-07-2026

$ 312.00 USD
Free Shipping
Add to Wish List

Includes everything you need to reseal and upgrade your leaking oil filter housing gasket: gaskets, hardware, VANOS line, oil pressure switch, oil service kit, and our upgraded billet aluminum oil drain-back valve.

The Turner Motorsport Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.

Features & Benefits:

Keeps the oil filter housing primed with oil to eliminate noisy dry startups Precision-machined, anodized billet aluminum check valve body with zinc-plated steel plunger and spring Maintenance-free sealed design engineered for lifetime durability Easy installation — pry the old one out and press the new one in during oil filter housing gasket service

Show More Show Less
24-270X Accusump Pro Electric Valve Kit
24-270X Accusump Pro Electric Valve Kit
Canton Racing - Corporate Logo
T#:590562
Part#: 24-270X
Ships on Dec 3, 2026
17% off MSRP $ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD
Free Shipping
Add to Wish List
17% off MSRP
$ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD
Free Shipping
Add to Wish List

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping