BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
Ships in 2 Business Days
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
For vehicles with production date up to 04/2007
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:367404
Part#: 31336752735
Ships on Nov 3, 2026
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Direct replacement strut mount with integrated bearing for precise steering feel.
Meyle Rear Lower Control Arm - E36, E46, E83, Z4
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369355
Part#: 33326770813
Ships on Nov 3, 2026
$ 44.99 USD
Free Shipping on orders $49 and up
Complete including bushing

BMW E46 Front Suspension Refresh Kit - Level 2
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:368816
Part#: E463112-2
Back Ordered
$ 967.99

This product was last offered at the strikethrough price on
05-01-2026

$ 833.99 USD
Free Shipping
$ 833.99 USD
Free Shipping

BMW E46 Front Suspension Refresh Kit - Level 2 is designed to rejuvenate and improve the suspension of your BMW E46, providing better-than-new performance with select upgraded components. This comprehensive suspension kit addresses common issues such as loose steering, excessive vibration during braking, and noises like squeaking or grinding when turning at low speeds. It not only fixes these symptoms but also enhances suspension longevity and handling precision.

  • Rejuvenates worn-out suspension for better-than-new performance
  • Improves steering precision and reduces vibration
  • Enhances durability and extends suspension lifespan
  • Includes strut reinforcement plates to prevent strut tower deformation and cracking
  • Comprehensive kit with upgraded components for superior performance

Kit Contents:

  • 2 front control arms
  • 2 control arm bushings with brackets
  • 2 sway bar end links
  • 2 tie rod assemblies
  • 2 strut mounts
  • 2 strut mount reinforcement plates

Upgrade your BMW E46’s suspension with this premium refresh kit and enjoy enhanced handling and driving comfort.

Show More Show Less

Meyle - Rear Bumpstop With Guard Tube - Pair
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40342843
Part#: 33531138109
Ships on Nov 3, 2026
$ 21.99 USD
Free Shipping on orders $49 and up
Maintain suspension integrity, reduce component wear, and ensure a smoother, more controlled ride.
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less

Suspension Bump Stop - Rubber - Rear
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:54959274
Part#: 300 335 3101
In Stock
New Item
$ 6.99 USD
Free Shipping on orders $49 and up
Maintain original chassis protection and restore proper shock travel safety with this Meyle replacement rear bump stop.
Rear Coil Spring
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:55461403
Part#: 3147390000
Ships on Nov 3, 2026
New Item
$ 31.99

This product was last offered at the strikethrough price on
09-17-2026

$ 30.99 USD
Free Shipping on orders $49 and up
$ 30.99 USD
Free Shipping on orders $49 and up
If you own an E46 3-Series, you're likely well aware that the factory rear coil springs are a notorious weak point. Due to the "Mini Block" barrel design and the elements, the bottom pigtails of the rear springs frequently crack and break, throwing off your alignment, causing uneven tire wear, and ruining your cornering dynamics.
Show More Show Less
Meyle Front Strut - Right - E46
For coupe and sedan vehicles with a production date of 04/2001+
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:55497444
Part#: 3266230019
Ships on Nov 3, 2026
New Item
$ 69.99

This product was last offered at the strikethrough price on
08-28-2026

$ 66.99 USD
Free Shipping on orders $49 and up
$ 66.99 USD
Free Shipping on orders $49 and up
Engineered to restore factory ride height and precise handling dynamics, Meyle Original Front Struts deliver uncompromising damping performance and rebound control. Manufactured to exacting OE specifications, these premium twin-tube, gas-charged struts feature advanced valving technology designed to optimize hydraulic fluid flow and minimize cavitation under heavy suspension loads. Utilizing a micro-polished, hardened steel piston rod paired with a low-friction multi-lip seal, these struts ensure exceptional durability against fluid leaks while actively mitigating NVH (Noise, Vibration, and Harshness) to maximize tire-to-road contact.
Show More Show Less


Meyle Front Strut - Left - E46
For coupe and sedan vehicles with a production date of 04/2001+
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:55497445
Part#: 3266230020
Ships on Nov 3, 2026
New Item
$ 69.99

This product was last offered at the strikethrough price on
08-28-2026

$ 66.99 USD
Free Shipping on orders $49 and up
$ 66.99 USD
Free Shipping on orders $49 and up
Engineered to restore factory ride height and precise handling dynamics, Meyle Original Front Struts deliver uncompromising damping performance and rebound control. Manufactured to exacting OE specifications, these premium twin-tube, gas-charged struts feature advanced valving technology designed to optimize hydraulic fluid flow and minimize cavitation under heavy suspension loads. Utilizing a micro-polished, hardened steel piston rod paired with a low-friction multi-lip seal, these struts ensure exceptional durability against fluid leaks while actively mitigating NVH (Noise, Vibration, and Harshness) to maximize tire-to-road contact.
Show More Show Less
Meyle Rear Shock Absorber - E46
For vehicles with a production date from 03/2001 to 04/2001 For vehicles with a production date from 11/2000 to 04/2001 For vehicles with a production date from 03/2001 to 09/2001 For vehicles with a production date from 11/2000 to 09/2001
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579427
Part#: 33522282099
Ships on Nov 3, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
$ 42.99 USD
Free Shipping on orders $49 and up
Get rid of your blown out knocking rear shocks.
Meyle Dust Boot Kit
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40444311
Part#: 3146400013
Ships on Nov 3, 2026
$ 21.99 USD
Free Shipping on orders $49 and up
Protect your suspension with this Meyle front shock dust boot—precision-fit to OE specs for easy install and long-term reliability. It shields your strut from dirt, grime, and moisture, extending shock life and preserving that smooth, confident ride. A simple upgrade that pays off every mile.
Show More Show Less

Meyle Front Sway Bar Bushing - E46
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592325
Part#: 31351097179
Ships on Nov 3, 2026
$ 9.99 USD
Free Shipping on orders $49 and up
$ 9.99 USD
Free Shipping on orders $49 and up
23mm diameter sway bar

Trailing Arm Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594607
Part#: 33326771828
Ships on Nov 3, 2026
$ 14.99 USD
Free Shipping on orders $49 and up
Bushing located in the rear lower position of the rear trailing arm. Priced Each. Used for both driver and passenger sides.
Front Coil Spring - E46
For Sedan/Wagon models model years 1999-2005
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:54959275
Part#: 31331094733
Ships on Nov 3, 2026
New Item
$ 43.99 USD
Free Shipping on orders $49 and up
$ 43.99 USD
Free Shipping on orders $49 and up
Get that precise suspension feel bag on your E46

Meyle Dust Cover Kit
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40478106
Part#: 3146400007
Ships on Nov 3, 2026
$ 28.99 USD
Free Shipping on orders $49 and up
The Meyle 3146400007 Front Shock Dust Boot is a durable, OEM-style replacement designed to shield your suspension components from the elements. Precisely engineered for a perfect fit on your BMW’s front shocks, it blocks dirt, moisture, and debris, helping maintain smooth performance and extending strut life. Easy to install and built for longevity, it’s an essential upgrade for preserving your ride’s integrity.
Show More Show Less
Front Sway Bar Bushing - Each
For coupe models with standard suspension For vehicles with standard suspension For sedan models with standard suspension
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594571
Part#: 31351094554
Ships on Nov 3, 2026
$ 11.99 USD
Free Shipping on orders $49 and up
$ 11.99 USD
Free Shipping on orders $49 and up
One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings.
Show More Show Less

Meyle Dust Boot Kit
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:40444307
Part#: 3146400018
Ships on Dec 11, 2026
$ 28.99 USD
Free Shipping on orders $49 and up
Safeguard your front shocks from grime, moisture, and road debris with this Meyle dust boot. Built to OE specifications, it helps prolong shock life and preserve smooth suspension performance—an easy, budget-friendly upgrade for long-term reliability.
Show More Show Less

Rear Sway Bar End Link - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594572
Part#: 33551094619
Ships on Nov 3, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
The sway bar on your vehicle is essentially a connection between the left and right lower control arms. When you take a corner in your vehicle, the sway bars flex and rebound like a spring. Stock bars give a stock performance.
Show More Show Less
Meyle Strut Assembly - Right - E46
For sedan models with production date up to 09/2001 with sport suspension or poor road ... For coupe models with production date up to 04/2001
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:361950
Part#: 31316750792
Ships on Nov 3, 2026
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
OEM replacement for your vehicle's suspension
Inner Wishbone Control Arm Bushing - BMW E82/88 E9X RWD
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36100161
Part#: 3146100001
Ships on Nov 3, 2026
$ 13.99 USD
Free Shipping on orders $49 and up
Replace your worn-out inner control arm bushing to restore suspension handling and feel.


Meyle Strut - E46
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:361949
Part#: 31316750791
Ships on Nov 3, 2026
$ 88.99 USD
Free Shipping on orders $49 and up
OEM replacement for your vehicle's suspension
Meyle - Corporate Logo
T#:40444309
Part#: 3146400014
Ships on Nov 3, 2026
$ 35.99 USD
Free Shipping on orders $49 and up
Protect your BMW’s suspension with this Meyle front shock dust boot. Built to OE specs, it guards your strut from dirt, debris, and moisture—helping extend shock life and preserve ride comfort. A smart, budget-friendly upgrade that delivers lasting value.
Show More Show Less
Rear Subframe Bushing - Priced Each
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594566
Part#: 33316770781
Back Ordered
$ 16.99 USD
Free Shipping on orders $49 and up
If there is excessive vibration in your cabin or a clunk or knock when going over bumps, the problems may be your subframe bushings. By replacing them with new units, everything will stay tighter and provide a more secure mounting location for your lower control arms, engine, and transmission.
Show More Show Less