BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 78.99

This product was last offered at the strikethrough price on
05-07-2026

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Front Sway Bar Link - E46, Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:338081

Part#: 31351095694

In Stock

Starting at $ 36.52 USD

Add to Wish List

Starting at $ 36.52 USD

Add to Wish List

This is the standard front sway bar / swaybar link for BMW E46 and E85 Z4. It connects the sway bar to the strut. If you hear front end noise when going over bumps while turning we recommend you check these. Alternate BMW Part#31356780847 Sold individually

We also offer an upgraded link from Meyle with heavy duty ball joints for additional durability. See options below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 - Sorry not for Xi Models!
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Front BMW 3 Series 2005-

T#:13200577

Part#: 31336769915

Ships on Sep 23, 2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Replace your cracked or failing spring with this aftermarket replacement!

E46 non-M OEM/HD Rear Subframe Mount Set

10X Entries Into Our F80 M3 Sweepstakes

T#:340768

Part#: 33316770781KT

In Stock

Sale - Save 48% $ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 81.44 USD

Add to Wish List

Qty

Sale - Save 48%

$ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 81.44 USD

Add to Wish List

The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. This kit comprises OEM Lemforder and Meyle HD rubber subframe mounts. Solid aluminum mounts are also available with very little increase in NVH.

Show More Show Less

Condor Speed Shop - Control Arm Bushings Offset - E46

21mm insert for control arm.

T#:40782367

Part#: CONTROLBUSHOFF46

Ships in 2 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Polyurethan bushings with a offset insert for control arm.

Bilstein B4 Rear Shock Absorber Replacement Kit - BMW E46 M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344775

Part#: T19-199511KT

Ships in 2 Business Days

Sale - Save 12% $ 405.99

This product was last offered at the strikethrough price on
08-25-2026

$ 358.03 USD

Add to Wish List

Qty

Sale - Save 12%

$ 405.99

This product was last offered at the strikethrough price on
08-25-2026

$ 358.03 USD

Add to Wish List

If your rear shocks are blown, we highly recommend replacing them ASAP to prevent a harsh ride and excessive wear and tear on other suspension and driveline components. This kit includes everything necessary to replace your rear shocks with Bilstein B4 rear shocks, matching the original ride quality of your factory BMW shocks.

Show More Show Less

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

For model year 2002+ only

T#:50837389

Part#: RE.RBE46

Ships on Aug 28, 2026

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

Rogue Engineering V-Brace Chassis Support - E46 M3

T#:12643107

Part#: RE.899

Ships in 9 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

An integral part on E46 M3 is the rear chassis "V-Brace" (BMW # 33312229899) found on all 2001-06 Convertibles and Coupe (including the CSL). This brace attaches to the outward points of the rear chassis and to the area near the rear subframe carrier. Since some of these vehicles are now over 20 years old, we have been seeing more and more of these start to rust away. We began studying the OEM part, curious as to why they were starting to rust away. We found that the two arms of the "V" are made from 38mm x 12mm (1.5" x 0.5") hollow square steel tubing, pressed ends and welded to a junction plate joining them with welds holding the arms at a specific angle. Since the arms are hollow, it helps keep the overall weight down, but does little to prevent corrosion since it is difficult to paint/coat a hollow tube. A Google search turned up very little other than used ones on eBay and new ones that turned out to be in short supply from the BMW dealer (not surprising since the car is over 20 years old). Determined to make something better, we began our engineering and R&D process. Goals of our Design; Modular design, since packaging and shipping something this large would probably be too expensive Costs would dictate material and manufacturing methods Lighter weight would be a secondary (or tertiary) goal, but also keeping in mind costs Corrosion resistant, so it would not rust from the inside out, like the OEM version After weighing the material, manufacturing and cost options, we decided to go with a fully CNC'd ACQ 6061-T6 aluminum assembly. The concept is to machine two identical arms (one part number) and have them joined with a "junction plate". The arms would be secured to the plate with Grade 8.8 grade hardware and the entire assembly would include replacement Grade 10.9 hardware to replace the original OEM hardware (which is probably original). Details of our Design; CNC'd 6061-T6 construction, secured with Grade 8.8 socket head cap screws. Included are replacement Grade 10.9 hardware to fit in the factory locations. About 4 lbs. fully assembled weight (vs. 6.25 lbs for OEM), about a 35% weight savings Anodized gray finish Modular design allows for one arm to be removed in case of exhaust removal requirement. Included in the Kit Two (2) arms of the brace assembly (they are idential) One (1) junction plate One (1) red spacer (this goes BETWEEN the brace and the chassis!) Two (2) blue spacers (these goes BETWEEN the brace and the chassis!) Four (4), M10 socket head cap screws Three (3), M10 flanged hex head bolts It is recommended that the holes used to mount the V-brace onto the car be cleaned before installation by running an M10x1.5 tap to clean each of the holes.

Show More Show Less

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 16, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

Basic Monoball Bearing Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:401616

Part#: 80402KT2

Back Ordered

Sale - Save 2% $ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

Qty

Sale - Save 2%

$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

This monoball service kit is designed to ensure long-lasting performance of your BMW suspension components by providing the correct CV-2 grease and a Schwaben snap-in grease gun nozzle—perfect for proper installation and routine maintenance at every oil change.

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Monoball Be...

10X Entries Into Our F80 M3 Sweepstakes

T#:15744062

Part#: 311267585190-KT

Ships in 1-3 days

Sale - Save 4% $ 869.20

This product was last offered at the strikethrough price on
05-03-2026

$ 838.11 USD

Add to Wish List

Qty

Sale - Save 4%

$ 869.20

This product was last offered at the strikethrough price on
05-03-2026

$ 838.11 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right control arms with pressed in ball joints Turner Motorsport control arm monoball bearings - pre-installed into the brackets All the necessary mounting hardware Turner monoball bearings: Features: Bearing Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static). Housing 6061-T6, anodized housing with needle grease zerk for easy maintenance. In house designed knurled OD to provide the perfect fit for the wide range of housing diameters among brands. Bearing Insert Arm adapter Precision CNC machined Delrin, providing a tight fit between the bearing and the control arm. Performance Instant, crisp steering and braking response. Easy to maintain, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15677498

Part#: 31126758519-KT

Ships in 1-3 days

Sale - Save 14% $ 628.32

This product was last offered at the strikethrough price on
05-02-2026

$ 543.43 USD

Add to Wish List

Qty

Sale - Save 14%

$ 628.32

This product was last offered at the strikethrough price on
05-02-2026

$ 543.43 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware

Show More Show Less

Suspension Reinforcement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677561

Part#: 51717036781-KT

In Stock

Sale - Save 16% $ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

Qty

Sale - Save 16%

$ 265.00

This product was last offered at the strikethrough price on
04-03-2026

$ 221.81 USD

Add to Wish List

If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The ECS rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The ECS Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.

Show More Show Less

Rogue Engineering Adjustable Rear Control Arms

T#:34885415

Part#: RE.ARCA.2.RE

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Complete Rear Upper Shock Mounting Kit

10X Entries Into Our F80 M3 Sweepstakes
Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your da

T#:15677562

Part#: 07119905374-KT

Ships on Feb 22, 2027

Sale - Save 15% $ 115.30

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD

Add to Wish List

Qty

Sale - Save 15%

$ 115.30

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD

Add to Wish List

Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty ECS rear shock mount reinforcement plates Locking nuts

Show More Show Less

Mubea Front Coil Spring - E46

For vehicles with manual transmission only

T#:383116

Part#: 31331096184

Ships on Sep 23, 2026

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

Replace your cracked springs

Front Suspension Refresh Kit - Level 1

10X Entries Into Our F80 M3 Sweepstakes

T#:15777317

Part#: E463112-5-KT

Ships on Dec 23, 2026

Sale - Save 6% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD

Add to Wish List

Qty

Sale - Save 6%

$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD

Add to Wish List

Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 includes: 2 front control arms 2 front control arm bushings 2 front inner ball joints

Show More Show Less

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

10X Entries Into Our F80 M3 Sweepstakes

T#:41289766

Part#: 31521428678TKT

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

Sub-Categories

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

Front Sway Bar Link - E46, Z4

Front BMW 3 Series 2005-

E46 non-M OEM/HD Rear Subframe Mount Set

Condor Speed Shop - Control Arm Bushings Offset - E46

Bilstein B4 Rear Shock Absorber Replacement Kit - BMW E46 M3 ...

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

Rogue Engineering V-Brace Chassis Support - E46 M3

Replacement Bushings for Rear Shock Tower Mounts

Basic Monoball Bearing Service Kit

Lower Front Control Arm Kit - Featuring Turner Motorsport Monoball Be...

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

Suspension Reinforcement Kit

Rogue Engineering Adjustable Rear Control Arms

Complete Rear Upper Shock Mounting Kit

Mubea Front Coil Spring - E46

Front Suspension Refresh Kit - Level 1

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results