Home
Suspension

BMW Suspension Parts for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shoc...

T#:656138

Part#: RSMNONONO

Back Ordered

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

SPL Parts Titanium Series Adjustable Rear Camber Arm Pair - E46 Z4 ...

T#:825816

Part#: SPLRLLE46

Ships in 1 Business Day

$ 404.00 USD

Add to Wish List

Qty

$ 404.00 USD

Add to Wish List

These SPL parts adjustable rear camber arms replace OEM part number 33326770813 These rear camber arms allow for significantly greater camber adjustment over stock, a major benefit to lowered cars that need their camber readjusted to prevent tire wear and poor handling. These camber arms also provide increased stability and predictability versus the stock camber arms with rubber bushings. SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. These rear camber arms from SPL parts utilize gun drilled 6061-T6 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and a 360 degree rotating clamp system. This provides optimal strength, performance, durability, and adjustment simplicity. SPL's adjustment design makes it simple to lock in your alignment settings, requiring only a 3/16" allen key! Features custom 3 piece FK bearings and rod ends manufactured in Connecticut - these also utilize a teflon liner which promotes quiet operation, low friction, and smooth articulation while eliminating bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner is suited perfectly for track use, with operating temperatures ranging from -65 degrees Fahrenheit to 325 degrees. Technical Specifications: Lightweight Aluminum, Titanium, and Stainless steel construction Anodized Black for corrosion protection and durable finish Gundrilled center hex links for maximum weight savings Teflon lined FK Rod Ends Made in the USA Fits the following BMWs: 1999-2006 E46 BMW RWD Models

Show More Show Less

Godspeed Performance Rear Camber Arm Kit

T#:600123

Part#: AK-034

In Stock

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

These are a cheap, performance addition that give you greater adjustment ranges and versatility as well as more positive feedback of road feel thanks to their solid design.

Rear Subframe Reinforcement Kit

T#:397247

Part#: 13-005

Ships in 3 Business Days

5% off MSRP $ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

Qty

5% off MSRP

$ 149.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 142.00 USD

Add to Wish List

One of the most common issues with the E46 is that the subframe likes to tear away from the chassis. Fix this by welding in a Rear Subframe reinforcement kit.

Includes all necessary reinfored metal plates
Professional installation is required
Suspension must be realigned after installation

Fits the following BMWs:
1998 - 2006 E46 320i 323i 325i 325xi 328i 330i 323ci 325ci 330ci M3

Show More Show Less

RKP Carbon Front Thrust Panel - E46 M3

T#:29002060

Part#: RKP-E46-CFTP

Ships in 3 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

The OE thrust plate is more than just a belly panel that covers your oil pan; it plays a crucial role in chassis rigidity, impact safety, and handling dynamics. BMW emphasizes that a vehicle should not be driven or moved without the thrust panel in place due to its importance.

Inspired by BMW's upgrade of the front bumper carrier on the E46 M3 from aluminum to Kevlar during their LCI update, we have made a similar enhancement to the thrust plate with our RKP Carbon Front Thrust Panel.

Product Details:

Multi-layered for optimal rigidity and durability 20% stiffer and 50% lighter than the OE panel Reflective exhaust heat shielding included Replaces the large, heavy aluminum OE panel

Show More Show Less

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

For model year 2002+ only

T#:50837389

Part#: RE.RBE46

Back Ordered

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

Rogue Engineering V-Brace Chassis Support - E46 M3

T#:12643107

Part#: RE.899

Ships in 9 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

An integral part on E46 M3 is the rear chassis "V-Brace" (BMW # 33312229899) found on all 2001-06 Convertibles and Coupe (including the CSL). This brace attaches to the outward points of the rear chassis and to the area near the rear subframe carrier. Since some of these vehicles are now over 20 years old, we have been seeing more and more of these start to rust away. We began studying the OEM part, curious as to why they were starting to rust away. We found that the two arms of the "V" are made from 38mm x 12mm (1.5" x 0.5") hollow square steel tubing, pressed ends and welded to a junction plate joining them with welds holding the arms at a specific angle. Since the arms are hollow, it helps keep the overall weight down, but does little to prevent corrosion since it is difficult to paint/coat a hollow tube. A Google search turned up very little other than used ones on eBay and new ones that turned out to be in short supply from the BMW dealer (not surprising since the car is over 20 years old). Determined to make something better, we began our engineering and R&D process. Goals of our Design; Modular design, since packaging and shipping something this large would probably be too expensive Costs would dictate material and manufacturing methods Lighter weight would be a secondary (or tertiary) goal, but also keeping in mind costs Corrosion resistant, so it would not rust from the inside out, like the OEM version After weighing the material, manufacturing and cost options, we decided to go with a fully CNC'd ACQ 6061-T6 aluminum assembly. The concept is to machine two identical arms (one part number) and have them joined with a "junction plate". The arms would be secured to the plate with Grade 8.8 grade hardware and the entire assembly would include replacement Grade 10.9 hardware to replace the original OEM hardware (which is probably original). Details of our Design; CNC'd 6061-T6 construction, secured with Grade 8.8 socket head cap screws. Included are replacement Grade 10.9 hardware to fit in the factory locations. About 4 lbs. fully assembled weight (vs. 6.25 lbs for OEM), about a 35% weight savings Anodized gray finish Modular design allows for one arm to be removed in case of exhaust removal requirement. Included in the Kit Two (2) arms of the brace assembly (they are idential) One (1) junction plate One (1) red spacer (this goes BETWEEN the brace and the chassis!) Two (2) blue spacers (these goes BETWEEN the brace and the chassis!) Four (4), M10 socket head cap screws Three (3), M10 flanged hex head bolts It is recommended that the holes used to mount the V-brace onto the car be cleaned before installation by running an M10x1.5 tap to clean each of the holes.

Show More Show Less

Rogue Engineering Adjustable Rear Control Arms

T#:34885415

Part#: RE.ARCA.2.RE

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

SPL Pro Front End Links

T#:54388465

Part#: SPLFEE46

Ships in 1 Business Day

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

Eliminate the weak link in your front anti-roll system. Deliver uncompromised, highly predictable mechanical grip to the front axle with SPL PRO.

Select Vehicle

Purpose

Category

Home

Suspension

Brand

View All Brands

Price

Special Offers

New (1)

Shipping