BMW Performance Intake Kits for BMW 3 Series E46 (1999-2005)

Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.

Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!

With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.

Key benefits:

Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:

Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet

Revolutionize your driving experience with the E46 M3 Valved Performance Catback Exhaust from Turner. Crafted for the discerning driver, this lightweight and free-flowing exhaust boast two independent valved mufflers, offering two distinct driving experiences. Shedding 19lbs or more from the factory exhaust, the Turner catback delivers refined daily driving with closed valves, providing a smooth exhaust note. When the valves open, unleash an untamed racecar roar, experiencing heightened performance and a pure S54 sound. The flexibility to switch between the two at the touch of a button offers the best of both worlds.

Key Features:

• 19lbs or more weight savings
• In-house design using FARO ARM laser scanning and SolidWorks 3D CAD modeling
• Retains factory emissions
• Compatible with factory or aftermarket headers/front sections
• Mandrel-bent dual 2.5" 304SS pipe
• High-flow dual valved, stainless steel mufflers
• Vacuum actuated valves for adjustable sound
• Integrated x-pipe for improved exhaust note
• Kit includes E46 M3 midsection, dual valved mufflers, valve actuators, remote key fobs, exhaust gaskets and hardware, new center exhaust hangers
• Optional 3.5" Brushed or Chrome tips
• Free Doorbuster: S54 Open Intake

S54 Open Intake:

Amplify airflow and let your S54 breathe with the Turner Open Intake System. With a 200% greater flow than the factory airbox, this intake enhances induction noises, providing an exhilarating auditory experience. The design integrates seamlessly with OE fresh air scoops, maintaining stock mounting locations and incorporating a 4" conical filter for maximum flow and filtration efficiency.

Features:

• 200% greater flow than the factory airbox
• Wrinkle Black Powdercoated Heat Shield
• Precision fit heat shield for cool air intake
• Utilizes OE fresh air inlet scoop
• Aluminum MAF housing maintains OEM MAF scaling
• 4" conical hi-flow reusable air filter

Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.

Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!

With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.

Key benefits:

Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:

Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet

Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.

Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!

With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.

Key benefits:

Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:

Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet