BMW Drivetrain Parts for BMW 3 Series E46 (1999-2005)

A common source of leaks, the selector shaft seal should be replaced whenever the shifter assembly is serviced to prevent fluid loss.

Fits the following BMW chassis:
E36, E39, E46, E36/7 Z3

Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This is the OE shifter for the E46 325xi and the 330xi (up to 03/2003) and the E36 Z3 1.9 and 2.5.

The shift lever out of the Z3 1.9 delivers a smooth and quiet shift without the notchiness and effort of aftermarket short shift kits. The Z3 shifter in the E30 is approximately 20% shorter than the original E30 shifter - less reduction than a full short shift kit but the perfect compromise between stock and aftermarket. We have installed multiple shift levers in the E30 but the Z3 1.9 feels the best to us. The shift knob height is reduced by about 1/4". This is the Genuine BMW Z3 1.9 shift lever and a direct fit to 6/86-1992 E30 318i/is, 325e/es, and 325i/is.

E30 install note: there is a bowl-shaped vibration damper mounted with the transmission flex disc (guibo). This damper needs to be removed or you need to bend the stock selector rod so it will clear. Most E30s already have the vibration damper removed so don't be surprised if it's not there. If you do choose to remove it, this would be the perfect time to replace the flex disc. On some 325e models the flex disc is a larger diameter and the selector rod will need to be bent to clear it.

This item fits the following BMWs:
1990-1992 E30 BMW 318i 318is 318ic
6/1986-1992 E30 BMW 325e 325es 325i 325ic 325is

BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.

• Improved Performance: Upgrades the factory clutch fork pivot pin to deliver a more precise and responsive clutch operation.
• Enhanced Reliability: Built to withstand the demands of both daily driving and spirited driving, offering greater durability over OEM components.
• Quality Construction: Made from high-quality materials to ensure long-lasting performance and resistance to wear and tear.
• Direct Fit: Designed specifically for BMW E36 and E46 models, ensuring a perfect fit with no modifications required.
• Enhanced Driving Experience: Reduces clutch play and enhances engagement feel, contributing to a more engaging driving experience.

Installation Note: Designed for street use and compatible with standard clutch systems.

This is the shifter actuator pin that's part of BMW's gate system for the shifter.

Genuine BMW Locking Pin
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.

Key Features:

1. High-Quality Material:

   • Crafted from durable materials, these round bushings are engineered to withstand the rigors of daily driving and performance use. Their robust construction ensures long-lasting reliability and performance.

2. Enhanced Shifting Precision:

   • By reducing play and unwanted movement in the shifter mechanism, these bushings allow for more accurate gear engagement. This improvement translates to a more responsive and connected feel when shifting gears.

3. Improved Shift Quality:

   • Replacing worn or degraded bushings with new round bushings can significantly enhance shift quality. Drivers will notice a reduction in vagueness and a more direct response when changing gears, contributing to a more engaging driving experience.

4. Simple Installation:

   • Designed for ease of installation, these bushings can typically be replaced using standard hand tools. While experienced DIYers can handle the job, professional installation is recommended to ensure proper alignment and function.

5. Wide Compatibility:

   • Suitable for a variety of BMW models, these bushings are an excellent upgrade for enthusiasts looking to improve their vehicle's shifter performance and feel.

Benefits of Upgrading or Replacing:

• Direct and Engaging Shifting: New bushings eliminate excess movement in the shifter assembly, providing a firmer and more enjoyable shifting experience.
• Vibration Dampening: Fresh bushings help absorb vibrations, reducing noise from the shifter area and contributing to a quieter cabin environment.
• Extended Component Life: By replacing old, worn bushings, you can prevent additional wear and tear on the shifter assembly, ultimately extending its lifespan.

In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.

Elevate your BMW's maintenance routine with this specialized butyl tape tailored for the center support bearing. Usually replaced during servicing, this butyl tape plays a crucial role in providing proper sealing and support for your BMW's center support bearing, contributing to enhanced performance and extended longevity.

Key Benefits:

• Specifically designed for BMW center support bearing maintenance
• Ensures proper sealing and support
• High-quality tape for reliability and durability