Please ensure your correct model is selected
Upgrade the shifting precision and feel of your BMW with Turner Motorsport Powerflex Shifter Carrier Street Bushings - Oval. Made of 90A urethane, these bushings replace the stock rubber ones to prevent sloppy shifting. The stiff urethane reduces play without adding vibration. Easy to install when the carrier is out of the car, these bushings ensure improved performance. Here are the key benefits:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW Shifter Carrier Arm Bushings - Oval are essential components designed to support and stabilize the shifter assembly in various BMW models. These bushings ensure a firm and accurate connection between the shifter carrier arm and the vehicle chassis, resulting in smoother, more precise gear shifts.
Oval Design for Stability:
Enhanced Shifting Accuracy:
Durable and Long-Lasting:
Improved Driving Experience:
Easy Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Oval are a crucial upgrade for drivers looking to improve the performance and feel of their shifter. With enhanced durability, improved shifting precision, and a better driving experience, these bushings are a valuable investment for any BMW enthusiast.
BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.
Installation Note: Designed for street use and compatible with standard clutch systems.
The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.
High-Quality Material:
Enhanced Shifting Precision:
Improved Shift Quality:
Simple Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.
The Powerflex Rear Diff Front Mount Bushing for the BMW E46 3 Series and Z4 is a premium upgrade designed to enhance the stability and performance of the drivetrain. Here’s an alternative description:
High-Performance Polyurethane: Powerflex bushings are made from advanced polyurethane, which is significantly more durable than standard rubber. This material resists wear, deformation, and the effects of heat, oil, and contaminants, making it a long-lasting solution for high-performance applications.
Purpose: The rear differential front mount is subjected to high levels of stress during acceleration and cornering. Over time, the stock rubber bushing can degrade, causing excessive movement in the differential. The Powerflex bushing eliminates this movement, allowing for improved drivetrain control and reducing unwanted flex.
Key Features:
Benefits:
Fitment: This bushing is designed as a direct replacement for the front mount of the rear differential in BMW E46 3 Series and Z4 models. It installs easily, without requiring modifications, and offers an immediate improvement in drivetrain response.
In summary, the Powerflex Rear Diff Front Mount Bushing is an essential upgrade for BMW E46 and Z4 drivers who want to improve drivetrain rigidity, reduce flex, and enhance overall performance. This bushing provides a durable, long-lasting solution that’s perfect for both street and track use, delivering better power transfer and handling.
4o
The Powerflex Heritage Rear Differential Mount for the BMW E46 M3, available through outlets like Turner Motorsport, is an ideal upgrade for enthusiasts seeking to enhance the performance and durability of their car's rear differential while preserving its classic appearance. The Heritage Series is tailored for those who prefer a more subtle aesthetic than the brightly colored bushings typical of Powerflex's standard line.
Key features:
Turner Motorsport often emphasizes the balance of performance and OEM-like comfort with these mounts, making them an excellent choice for those wanting to upgrade their rear differential mounting without detracting from the car's original feel.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This product was last offered at the strikethrough price on
05-27-2026
The Powerflex Shifter Arm Rear Bushing (Heritage) for BMW 3 Series, 5 Series, and Z Series models enhances your driving experience.
Perfect for BMW enthusiasts wanting to enhance shift feel while keeping a classic appearance.
.
