Packaged by Turner Cooling System Service for BMW 3 Series E46 (1999-2005)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

As the E46 M3 gets on in years and mileage, the cooling system will be one of the areas that needs the most attention. We have packaged all of the major cooling components into one overhaul kit:

• radiator
• water pump
• thermostat
• radiator hoses and clamps
• gaskets and o-rings

We have found that the E46 M3 can develop inconvenient cooling issues, even on daily driven street cars. While the infamous radiator and water pump failures of the E36 are a thing of the past, the E46 M3 still has its own complications. The best approach to avoid bigger problems is preventative maintenance. We recommend replacing the water pump before 80,000 miles and the radiator before 100,000 miles. By addressing these problem areas before a failure, you will save yourself a larger repair bill in the future.

In addition to the standard cooling package items above, there are several other cooling-related components that may make sense to do at the same time:

• Original BMW coolant
• fan clutch
• main serpentine belt and A/C belt
• Turner Power Pulley Kit (because now is the perfect time!)

This cooling overhaul package fits:
2001-2006 E46 BMW M3
 

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Genuine BMW Motorsport 55*C thermostat, for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• ECS Tuning Silicone Replacement Coolant Hoses - For increased reliability over stock rubber hoses
• ECS Tuning Heavy Duty Aluminum Bleeder Screw
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance Mishimoto Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 70*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased reliability over the stock composite pulley