BMW Transmission Parts for BMW 3 Series E46 (1999-2005)

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.�
Interval oil changes are often recommended for differentials to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent excess wear and gear damage, maintaining smoother operation.

Check your owner's manual to determine when it is best to flush your differential and what type and weight fluid to use when re-filling your system.�

This 75w140 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother operation even under the most demanding conditions.

APPROVALS:

API GL5
LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

BMW Hinterachsgetriebe�l
Ford WSL-M2C 192A
Scania STO 1:0
VME
ZF TE-ML 05D
ZF TE-ML 12D
ZF TE-ML 16G
ZF TE-ML 21D
Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Maintain the longevity of your BMW's manual transmission and differential by incorporating this fully synthetic 75w90 weight gear oil into your maintenance routine. Flushing and replacing fluids at specified intervals, as per your owner's manual, is crucial to prevent costly issues in the future. Explore the benefits of this gear oil:

• Specifically designed for BMW manual transmissions.
• Fully synthetic hypoid gear oil for high performance.
• Excellent protection in diverse weather conditions.
• Maximum wear protection and precise functionality.
• Enables longer oil change intervals.

Meets Specifications:

• API GL4, GL5, MT-1
• MIL-PRF 2105 E

A common source of leaks, the selector shaft seal should be replaced whenever the shifter assembly is serviced to prevent fluid loss.

Fits the following BMW chassis:
E36, E39, E46, E36/7 Z3

This is the OE shifter for the E46 325xi and the 330xi (up to 03/2003) and the E36 Z3 1.9 and 2.5.

The shift lever out of the Z3 1.9 delivers a smooth and quiet shift without the notchiness and effort of aftermarket short shift kits. The Z3 shifter in the E30 is approximately 20% shorter than the original E30 shifter - less reduction than a full short shift kit but the perfect compromise between stock and aftermarket. We have installed multiple shift levers in the E30 but the Z3 1.9 feels the best to us. The shift knob height is reduced by about 1/4". This is the Genuine BMW Z3 1.9 shift lever and a direct fit to 6/86-1992 E30 318i/is, 325e/es, and 325i/is.

E30 install note: there is a bowl-shaped vibration damper mounted with the transmission flex disc (guibo). This damper needs to be removed or you need to bend the stock selector rod so it will clear. Most E30s already have the vibration damper removed so don't be surprised if it's not there. If you do choose to remove it, this would be the perfect time to replace the flex disc. On some 325e models the flex disc is a larger diameter and the selector rod will need to be bent to clear it.

This item fits the following BMWs:
1990-1992 E30 BMW 318i 318is 318ic
6/1986-1992 E30 BMW 325e 325es 325i 325ic 325is

This is the shifter actuator pin that's part of BMW's gate system for the shifter.

Genuine BMW Locking Pin
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

The ZF 320z S5D is a common swap choice among BMW enthusiasts due to its reliable and robust nature. Unfortunately, it does have a weakness. The detent pins and springs that live inside of the transmission are known to wear down over time, often causing the shift lever to lean towards the 5th gear position when in neutral.

This full-service kit consists of everything you need to replace the failing detents in your ZF transmission. The kit contains only Genuine ZF components, all of which are sure to provide you with smooth shifting and operation for years to come.

This kit includes the following items:

3 Shift Pin Kits - 23117525048
2 Slide Bushings - 23117533395
2 Gearbox sealing lids - 23311224825
1 Shifter detent pin - 23311224849
1 Shifter detent pin - 23317502165
2 Lock Rings - 23317531374
3 Spring Retention Plates - 23317637524
5 Detent Drift/Punch Tools - 054834LA01AKT
Remedying the ZF's detent issue is a must for any enthusiast planning to get the most out of their transmission. Proper centering is essential for quick and smooth shifting, both being desirable features in any application. This kit is easy to install with several DIY guides existing online. A set of "drift" tools are included for proper installation.