Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades for BMW 3 Series E46 (1999-2005)

Clear BMW chassis

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Control Arm Bushings - Revshift-80A (OEM - Black)

T#:582015

Part#: PCABE30BLACK

Ships in 2 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Control Arm Bushings - Revshift-95A (Street/Track - Green)

T#:582014

Part#: PCABE30GREEN

Ships in 7 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Condor Speed Shop - Control Arm Bushings Offset - E46

21mm insert for control arm.

21mm insert for control arm.

T#:40782367

Part#: CONTROLBUSHOFF46

Ships in 2 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Polyurethan bushings with a offset insert for control arm.

Basic Monoball Bearing Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:401616

Part#: 80402KT2

Back Ordered

Sale - Save 2% $ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

Qty

Sale - Save 2%

$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD

Add to Wish List

This monoball service kit is designed to ensure long-lasting performance of your BMW suspension components by providing the correct CV-2 grease and a Schwaben snap-in grease gun nozzle—perfect for proper installation and routine maintenance at every oil change.

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Monoball Be...

10X Entries Into Our F80 M3 Sweepstakes

T#:15744062

Part#: 311267585190-KT

Ships in 1-3 days

Sale - Save 4% $ 869.20

This product was last offered at the strikethrough price on
05-03-2026

$ 838.11 USD

Add to Wish List

Qty

Sale - Save 4%

$ 869.20

This product was last offered at the strikethrough price on
05-03-2026

$ 838.11 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right control arms with pressed in ball joints Turner Motorsport control arm monoball bearings - pre-installed into the brackets All the necessary mounting hardware Turner monoball bearings: Features: Bearing Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static). Housing 6061-T6, anodized housing with needle grease zerk for easy maintenance. In house designed knurled OD to provide the perfect fit for the wide range of housing diameters among brands. Bearing Insert Arm adapter Precision CNC machined Delrin, providing a tight fit between the bearing and the control arm. Performance Instant, crisp steering and braking response. Easy to maintain, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Lower Front Control Arm Kit - Featuring Turner Motorsport Bushings ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15677498

Part#: 31126758519-KT

Ships in 1-3 days

Sale - Save 14% $ 628.32

This product was last offered at the strikethrough price on
05-02-2026

$ 543.43 USD

Add to Wish List

Qty

Sale - Save 14%

$ 628.32

This product was last offered at the strikethrough price on
05-02-2026

$ 543.43 USD

Add to Wish List

The front control arms on your E46 will fail at some time or another, since this part is the core of the front ends handling a refresh can greatly improve your driving experience. The question is, why settle for a standard soft bushing replacement? When you install this refresh kit you're adding in Turner Motorsport performance poly FCAB's adding enough stiffness to hold tight in the corners yet just soft enough to add almost zero NVH. Kit contents: Left & Right control arms with pressed in ball joints Turner 80a poly control arm bushings - pre-installed into the brackets All the necessary mounting hardware

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Front Suspension Refresh Kit - Level 1

10X Entries Into Our F80 M3 Sweepstakes

T#:15777317

Part#: E463112-5-KT

Ships on Dec 23, 2026

Sale - Save 6% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD

Add to Wish List

Qty

Sale - Save 6%

$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 501.26 USD

Add to Wish List

Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 includes: 2 front control arms 2 front control arm bushings 2 front inner ball joints

Show More Show Less

Select Vehicle

Purpose

Category

Control Arm Replacements & Upgrades

Brand

View All Brands

Price

Special Offers

On Sale (5)

Shipping