BMW X Series E53 (2000-2006)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Schwaben 3-Liter European Pressure Brake Bleeder with Catch Bottle ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26504945
Part#: 007237SCH01A02KT
In Stock
Sale - Save 17% $ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD
Free Shipping
Sale - Save 17%
$ 93.99

This product was last offered at the strikethrough price on
05-05-2026

$ 78.19 USD
Free Shipping

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Holds a full 3-Liters (3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

  • Do not exceed 20 PSI
  • LIFETIME REPLACEMENT


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Exterior Temperature Sensor Repair Kit - MOST BMWs (see applications)...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
Ships in 2 Business Days
Sale - Save 24% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 73.87 USD
Free Shipping
Sale - Save 24%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 73.87 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Performance Brake Fluid Flush Kit - Level 3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Timing Chain Kit - M50/M52/M54
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
Ships on Aug 14, 2026
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less

High-Performance Ignition Service Kit - BMW M54, (Early Models) M52 ...
For vehicles with production date up to 10/2002
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:583538
Part#: M54PISKT
In Stock
Sale - Save 20% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping
Sale - Save 20%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.21 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Screw Cap & Schwaben Removal Tool Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:401619
Part#: 16116762417KT1
In Stock
Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping
Sale - Save 18%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Show More Show Less

Wheel Storage Rack With Casters With Tire Stack Cover
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26505028
Part#: 003639SCH01A02KT
In Stock
Sale - Save 18% $ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD
Free Shipping
Sale - Save 18%
$ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD
Free Shipping

WHEEL STORAGE RACK:


Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset


TIRE STACK COVER:


This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

  • Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
  • Durable 150D coated material is rated for outdoor use.
  • Cover is a large 32" wide X 46" tall.
  • Fitted with a long 29" zipper up the side for easy installation and removal.
  • Nylon draw string at the bottom allows for a good snug fit.
  • Includes a handy storage pouch if not in use.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
European Pressure Brake Bleeder & Catch Bottle With Caliper Hook Set,...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:34919051
Part#: 007237SCH01A2KT
Ships on Aug 28, 2026
Sale - Save 44% $ 168.99

This product was last offered at the strikethrough price on
01-29-2026

$ 95.26 USD
Free Shipping on orders $49 and up
Sale - Save 44%
$ 168.99

This product was last offered at the strikethrough price on
01-29-2026

$ 95.26 USD
Free Shipping on orders $49 and up

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Holds a full 3-Liters (3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting

Note:

  • Do not exceed 20 PSI
  • LIFETIME REPLACEMENT


Includes:

  • 3 Liter (3.17 qts) storage tank
  • Pressure cap with 0-30 lb gauge and pressure relief valve
  • 40" hose
  • Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end


Note:

  • Recommend working at 10 PSI
  • Dimensions for cap seal: 12x21x4 mm
  • LIFETIME REPLACEMENT


CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.


CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

  • Holds brake calipers out of the way while working on brakes
  • Also use to hang other automotive parts and tools while working on your vehicle.
  • Stronger than zip ties or wire.
  • Save the brake hose by not hanging caliper by hose.
  • Made of  thick steel for strength and durability. length is 8"


BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.


BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

46 Piece 1/4" Drive Set With 5 Piece Trim/Molding Tool Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26505020
Part#: 010747SCH01A02KT
In Stock
Sale - Save 25% $ 120.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.21 USD
Free Shipping
Sale - Save 25%
$ 120.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.21 USD
Free Shipping

46 PIECE SET:


This 1/4" set contains all the most popular tools needed to get the job done on your European car repair.

Kit Contains:

-13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 

-1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).

-2PC- 1/4" DR.50 & 100MM EXTENSIONS 

-1PC- 1/4" DR.150MM FLEXIBLE EXTENSION

-1PC- 1/4" DR.UNIVERSAL JOINT

-1PC- 1/4" DR.SLIDING T-BAR

-1PC- 1/4" DR.6" SPINNER HANDLE

-1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER

-4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM

-6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM

-3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM

-3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3

-3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3

-6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40


TRIM/MOLDING SET:


Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage.

Made of impact resistant plastic that will not mar surfaces as metal screwdrivers and pry bars will. Slim design for delicate work in tight areas.

Kit includes:

  • Wide edge remover

  • Narrow edge remover

  • Pull-type remover

  • Handle remover

  • Upholstery clip remover


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Automatic Transmission Service Kit - E31 E38 E39 E53 M62
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554518
Part#: M62ATSKT
In Stock
$ 177.65 USD
Free Shipping
$ 177.65 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes Redline D4 ATF, the transmission filter, gasket and bolts.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 6 quarts Redline D4 automatic transmission fluid

Fits the following BMWs:
E31 BMW 840Ci (from 09/1996)
E39 BMW 540i (from 01/1997)
E38 BMW 740i/iL (from 01/1997)
E53 BMW X5 M62

Show More Show Less
Thermostat Replacement kit - 90C
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15744051
Part#: 82142209769KT
In Stock
Sale - Save 3% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.66 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.66 USD
Free Shipping on orders $49 and up
Turner BMW 7.5mm Wheel Spacers (Pair) - Normal Pad
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:6181664
Part#: TWH9905003T
In Stock
Sale - Save 3% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
Sale - Save 3%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less


6.5 Liter Fluid Extractor with Brake Bleeding Adapter - Bundle ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26504984
Part#: 011885SCH01A02KT
In Stock
Sale - Save 28% $ 140.99

This product was last offered at the strikethrough price on
05-05-2026

$ 101.80 USD
Free Shipping
Sale - Save 28%
$ 140.99

This product was last offered at the strikethrough price on
05-05-2026

$ 101.80 USD
Free Shipping

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

  • Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
  • Organized Efficiency: Integrated hose storage streamlines your extraction process.
  • Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
  • Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
  • LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!


ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
High-Performance Ignition Service Kit - BMW E39 E38 E53 M62
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:583528
Part#: M62PISKT
In Stock
Sale - Save 20% $ 327.99

This product was last offered at the strikethrough price on
05-03-2026

$ 262.42 USD
Free Shipping
Sale - Save 20%
$ 327.99

This product was last offered at the strikethrough price on
05-03-2026

$ 262.42 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Complete Cylinder Head Replacement Kit - BMW M52TU M54
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:15710818
Part#: 11127514540KT
Ships on Sep 16, 2026
Sale - Save 2% $ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,275.22 USD
Sale - Save 2%
$ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,275.22 USD
When duty calls and its time to replace or refresh your cylinder head, you'll need quite a few components. Look no further because we've collected all those parts into one kit including notable items like 7 liters of BMW oil, 1 gallon of coolant, all seals and gaskets needed and required hardware all available in one kit at the push of a button!
Show More Show Less

6 Piece Torx Screwdriver Set With 6 Piece Standard Screwdriver Set ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26505021
Part#: SD-T6PCS02KT
In Stock
Sale - Save 26% $ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 50.44 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 50.44 USD
Free Shipping on orders $49 and up

TORX SCREWDRIVER SET:


Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.

Entire kit packaged in a convenient molded case.

Sizes include: T10, T15, T20, T25, T27, and T30.


STANDARD SCREWDRIVER SET:


Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!

Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects.  Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!

Features:

  • Color-Coded Brilliance: Effortlessly switch between flat head and Philips heads, thanks to the intuitive color-coded design. Enhance efficiency and eliminate guesswork.
  • Comfortable Control: Experience fatigue-free operation with the ergonomic handles, offering both comfort and precision for intricate tasks.
  • Organized Housing: Housed in a molded tray, these commonly used screwdriver sizes are easily portable and organized, reducing the hassle of rummaging through toolboxes.
  • Essential Sizes: Curated for versatility, the set includes sizes catering to delicate tasks and robust projects, covering all your needs.

Includes:

  • 5.5x100mm flat head screwdriver

  • 6.5x150mm flat head screwdriver

  • 8x175mm flat head screwdriver

  • #1x75mm Phillips screwdriver

  • #2x100mm Phillips screwdriver

  • #3x150mm Phillips screwdriver


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

High-Performance Ignition Service Kit - BMW M54 (Late Models) ...
For vehicles with production date from 10/2002
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:583540
Part#: M54PISKT1
In Stock
Sale - Save 25% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 185.82 USD
Free Shipping
Sale - Save 25%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 185.82 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
E46 / E53 / E39 / E83 M54 Performance Ignition Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:22130469
Part#: M54PERFINGSRVKT
In Stock
Sale - Save 25% $ 243.35

This product was last offered at the strikethrough price on
05-03-2026

$ 182.83 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 243.35

This product was last offered at the strikethrough price on
05-03-2026

$ 182.83 USD
Free Shipping on orders $49 and up
This BMW Ignition coil is engineered with core windings optimized to enhance firepower and facilitate a faster, more efficient combustion process. This results in increased torque in the lower RPM range and enhanced horsepower in the upper range. The extent of these improvements will vary depending on your BMW engine's current condition, but you'll undoubtedly notice the difference. Additionally, it contributes to improved fuel economy. Ensure your engine runs smoothly and operates at its peak with an ignition service kit from Turner Motorsport. This comprehensive kit comprises 4 Bosch ignition coils with plug boots, Bosch spark plugs, and a packet of American Grease Stick dielectric grease. As an assurance of quality, all Bavarian Autosport brand parts are backed by a 2-year warranty.
Show More Show Less

High-Performance Ignition Service Kit - BMW E53 E6X E70 N62
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:583531
Part#: N62PISKT
In Stock
Sale - Save 18% $ 345.82

This product was last offered at the strikethrough price on
05-03-2026

$ 281.86 USD
Free Shipping
Sale - Save 18%
$ 345.82

This product was last offered at the strikethrough price on
05-03-2026

$ 281.86 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Turner BMW 5mm Wheel Spacers (Pair) - Normal Pad
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:6181662
Part#: TWH9905005T
In Stock
Sale - Save 25% $ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
Sale - Save 25%
$ 129.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 97.49 USD
Free Shipping
5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less

High-Performance Ignition Service Kit - BMW M54 M52 M52TU
For vehicles with production date up to 10/2002
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:25739342
Part#: 7599219TMS1KT
In Stock
Sale - Save 11% $ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 283.99

This product was last offered at the strikethrough price on
05-03-2026

$ 251.40 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM Bosch Platinum+4 spark plugs, and AGS dielectric grease. The new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Bosch Platinum+4 Replacement Spark Plugs Premium AGS Dielectric Grease Included
Show More Show Less

Turner BMW 15mm Wheel Spacer Kit - Normal Pad Size
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:6181661
Part#: TWH9905013T
In Stock
Sale - Save 25% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
Sale - Save 25%
$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less
24 Pc. 1/2" Drive 6 Point Metric Socket Set - Deep And Standard ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:27871815
Part#: 003409SCH01A02KT
In Stock
Sale - Save 20% $ 75.99

This product was last offered at the strikethrough price on
05-05-2026

$ 60.55 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 75.99

This product was last offered at the strikethrough price on
05-05-2026

$ 60.55 USD
Free Shipping on orders $49 and up

The Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set comprises two dozen 1/2-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 1/2" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.


Features:

Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.


Includes:

  • 10 mm - deep and standard socket
  • 12 mm - deep and standard socket
  • 13 mm - deep and standard socket
  • 14 mm - deep and standard socket
  • 15 mm - deep and standard socket
  • 16 mm - deep and standard socket
  • 17 mm - deep and standard socket
  • 18 mm - deep and standard socket
  • 19 mm - deep and standard socket
  • 21 mm - deep and standard socket
  • 22 mm - deep and standard socket
  • 24 mm - deep and standard socket
Show More Show Less
High-Performance Ignition Service Kit - BMW E39 E38 E53 M62
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:25739343
Part#: 7599219TMS2KT
In Stock
Sale - Save 6% $ 368.99

This product was last offered at the strikethrough price on
05-03-2026

$ 347.78 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 368.99

This product was last offered at the strikethrough price on
05-03-2026

$ 347.78 USD
Free Shipping on orders $49 and up
Every 60-80,000 miles, we recommend replacing your spark plugs and coils to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, we have put together our High-Performance Ignition Service Kits, now featuring our very own Turner Performance Ignition Coils! These kits include our new Turner Performance Ignition Coils, new OEM NGK BKR6EQUP spark plugs, and AGS dielectric grease. the new Turner Performance Ignition Coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark.) Ignition coils are responsible for 1/3 of the operation of your engine and it would be smart to weigh the options when shopping. Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. These coils offered by Turner feature a blue housing that gives your engine the performance and aesthetic you're looking for. Features and Benefits: Increased Performance Direct Fitment Signature Turner Blue finish High Quality Replacement Spark Plugs Premium AGS Dielectric Grease Included
Show More Show Less


Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set O...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26505022
Part#: 005945SCH01A02KT
In Stock
Sale - Save 20% $ 165.99

This product was last offered at the strikethrough price on
05-05-2026

$ 132.11 USD
Free Shipping
Sale - Save 20%
$ 165.99

This product was last offered at the strikethrough price on
05-05-2026

$ 132.11 USD
Free Shipping

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

  • Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
  • Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
  • Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
  • Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
  • Large Base: Equipped with a 7-inch diameter base for enhanced stability.
  • Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
OEM Accessory Belt Service Kit - E46 E39 E53 M54 (Pre-09/2002) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554446
Part#: M54ACCKT2
Back Ordered
Sale - Save 3% $ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 249.51 USD
Free Shipping
Sale - Save 3%
$ 256.99

This product was last offered at the strikethrough price on
06-23-2026

$ 249.51 USD
Free Shipping

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
2000-09/2002 E53 BMW X5 M54
2000-09/2002 E39 BMW M54
1999-09/2002 E46 BMW M54

Show More Show Less
2-in-1 Creeper Seat With 1/2" Drive Metric Socket Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:35019973
Part#: 3907SCH01A2KT
In Stock
Sale - Save 19% $ 99.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.37 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 99.99

This product was last offered at the strikethrough price on
05-05-2026

$ 81.37 USD
Free Shipping on orders $49 and up

2-IN-1 CREEPER SEAT:

The Schwaben 2 in 1 Creeper Seat is a versatile tool designed to enhance convenience in various maintenance tasks. Easily switch from a creeper to a stool, providing flexible options for different work scenarios. As a creeper, it allows you to slide effortlessly under your vehicle, while as a stool, it offers a comfortable seating option for low-height work, reducing strain on your back and knees.

This creeper seat features a thick, padded seat with a large vinyl cushion that remains soft and supportive. The headrest ensures comfort during extended use, and the waterproof, oilproof surface makes cleaning easy. Equipped with six 360° universal casters, it moves smoothly across different surfaces. The ball-bearing casters are compression and wear-resistant, ensuring easy maneuverability.

Constructed from thickened tubular steel, the Schwaben 2-in-1 Creeper Seat supports up to 330 lbs (150 kg), providing a sturdy and reliable platform. In stool mode, the robust frame prevents deformation, rolling, or tilting, ensuring stability.

With a ground clearance of only 3 inches, this creeper seat allows access to narrow, low-clearance spaces, making it ideal for garages and repair shops. Enjoy the convenience of switching between a creeper and a stool, and experience improved comfort and efficiency in your maintenance projects.


Key Features:

  • Creeper/Stool All-in-One: Easily converts from a creeper to a stool for versatile maintenance tasks.
  • Heavy-Duty Construction: Supports up to 330 lbs (150 kg) with a thickened tubular steel frame; prevents deformation, rolling, or tilting in stool mode.
  • Smooth Movement: Six 360° universal casters ensure smooth and flexible movement on various surfaces; ball-bearing casters are compression and wear-resistant.
  • Low Ground Clearance: Only 3 inches, allowing access to narrow and low-clearance spaces, perfect for garages and repair shops.
  • Comfortable Padded Seat: Thick vinyl cushion with a headrest for extended use without fatigue; waterproof and oilproof for easy cleaning.
  • Enhanced Efficiency and Comfort: Reduces strain on the back and knees, making it ideal for both routine maintenance and complex repairs.


Includes:

  • 1 x Creeper Rear Frame
  • 1 x Creeper Middle Frame
  • 1 x Creeper Headrest
  • 6 x Swivel Casters
  • 6 x Washers
  • 4 x M8x55 Hex Head Bolts
  • 4 x M8 Lock Nuts


1/2" DRIVE METRIC SOCKET SET:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.


Features:

  • Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
  • Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
  • Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
  • High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
  • Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
  • Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.


Includes:

  • 10 mm
  • 12 mm
  • 13 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 21 mm
  • 22 mm
  • 24 mm


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

OEM Automatic Transmission Filter Kit - E39 540i E38 740i 740il E31 8...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2936
Part#: 24341422673KIT
In Stock
$ 52.43 USD
Free Shipping on orders $49 and up

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits A5S440Z automatic transmissions on BMW E39 540I E38 740I 740IL E31 840I 840CI E53 X5 4.4I 4.6IS

Kit Contains:

  • 1 x 24341422673- Transmission Filter
  • 1 x 24111422676- Gasket for Transmission Filter
  • 1 x 24341422152- O-ring for Transmission Filter

This item fits the following BMWs:
1/1997-2003 E39 BMW 540i 540I wagon
1/1997-2001 E38 BMW 740i 740il
1/1997-1999 E31 BMW 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

40" Padded Creeper With Padded Creeper Seat
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:34919059
Part#: 005941SCH01A2KT
In Stock
Sale - Save 22% $ 142.99

This product was last offered at the strikethrough price on
05-05-2026

$ 111.28 USD
Sale - Save 22%
$ 142.99

This product was last offered at the strikethrough price on
05-05-2026

$ 111.28 USD

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 


 Features:

  • Thick fully padded leatherette cover.
  • 40" long with heavy-duty metal support frame.
  • 1"" steel tube frame.
  • Four position adjustable headrest.
  •  Six 2 1/2"oil-resistant rollers.
  • Powder coated frame to resist rusting.
  • Overall dimensions: 17" x 40" X 4"
  • Ground clearance: 1-1/2"
  • Ball bearing swivels on wheels.
  • 250lb capacity.


PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 


Features:

  • 2-1/2" thick padded leatherette seat.
  • 14" high. x 14" wide x 20" long.
  • 1" steel tube frame.
  • Divided tool tray below seat.
  • Four 2" wheels.
  • 2-1/2" ground clearance.
  • Ball bearing swivels on all wheels.
  • 250 lb capacity.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
3/8" Drive Long Flex Head Ratchet with 3/8" Drive 6 Point Socket Set ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:26505003
Part#: 005981SCH01A03KT
In Stock
Sale - Save 41% $ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 40.15 USD
Free Shipping
Sale - Save 41%
$ 67.99

This product was last offered at the strikethrough price on
05-05-2026

$ 40.15 USD
Free Shipping

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

  • Special designed 72T gear mechanism
  • 5 degree of handle movement between gears 
  • Flex head has 7 detent positions in a 180 degree swing
  • Push button release holds socket tight until you are ready to release
  • Ratchet is a full 290mm ( 11") long for extra leverage.


3/8" DRIVE 6 POINT SOCKET SET:


A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

  • 8mm
  • 9mm
  • 10mm
  • 11mm
  • 12mm
  • 13mm
  • 14mm
  • 15mm
  • 16mm
  • 17mm
  • 18mm
  • 19mm


LIFETIME REPLACEMENT on all items in this kit!

Show More Show Less

Schwaben Long Low Profile Floor Jack With 20L Low Profile Rolling Dra...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:34919039
Part#: 029121SCH01A2KT
In Stock
Sale - Save 13% $ 466.99

This product was last offered at the strikethrough price on
05-05-2026

$ 407.53 USD
Sale - Save 13%
$ 466.99

This product was last offered at the strikethrough price on
05-05-2026

$ 407.53 USD

LOW PROFILE JACK:

Meet the Schwaben Long Low Profile - High Lift Floor Jack: A Must-Have for BMW and MINI Enthusiasts.

Experience unmatched lifting efficiency with the Schwaben Long Low Profile - High Lift Floor Jack. Engineered with BMW and MINI enthusiasts in mind, this jack boasts a unique blend of features tailored to your beloved vehicles.

Key Features:

  • Swift Reach: Innovative One Pump feature ensures quick contact with most cars.
  • Versatile Reach: Ultra-long arm accommodates lowered cars and high vehicles like trucks and SUVs.
  • Safety Assured: Overload system prevents usage beyond its rated capacity, enhancing security.
  • Precision Control: Universal joint on the handle offers precise load management.
  • Seamless Positioning: Swivel saddle and rear casters enable easy jack placement.
  • Vehicle Care: Soft foam sleeve on the handle safeguards your vehicle's finish.
  • Protective Padding: Rubber saddle pad shields your car during lifting.
  • Added Convenience: Equipped with a tool tray on the jack for lug nuts and tools.
  • LIFETIME REPLACEMENT: If this jack is injured in the line of duty, it will be backed by our lifetime replacement policy!

Specifications:

  • Minimum Height: 2-3/4"
  • Maximum Height: 24"
  • Handle Length: 49-1/4"
  • Jack Body Length: 35"
  • Distance to Jack Pad Center from Pivot Point: 22"
  • Front Caster Dimensions: 2-1/2" diameter x 2" width
  • Saddle Diameter: 4" with full saddle pad
  • Max Weight Capacity: 4000 lbs.
  • ANSI / ASME PALD 2009 Certified


DRAIN PAN:

Features:

  • Use it for oils or coolant
  • Only 125mm high!
  • Rolls on 4 casters for ease of use


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Universal 40 Piece Metric Socket Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:27871829
Part#: 005981SCH01A06KT
In Stock
Sale - Save 32% $ 134.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.64 USD
Free Shipping on orders $49 and up
Sale - Save 32%
$ 134.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.64 USD
Free Shipping on orders $49 and up

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!


Includes:

  • 4 mm (1/4" Drive)
  • 4.5 mm (1/4" Drive)
  • 5 mm (1/4" Drive)
  • 5.5 mm (1/4" Drive)
  • 6 mm (1/4" Drive)
  • 7 mm (1/4" Drive)
  • 8 mm (1/4" Drive and 3/8" Drive)
  • 9 mm (1/4" Drive and 3/8" Drive)
  • 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
  • 11 mm (1/4" Drive and 3/8" Drive)
  • 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
  • 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
  • 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
  • 15mm (3/8" Drive and 1/2" Drive)
  • 16mm (3/8" Drive and 1/2" Drive)
  • 17mm (3/8" Drive and 1/2" Drive)
  • 18mm (3/8" Drive and 1/2" Drive)
  • 19mm (3/8" Drive and 1/2" Drive)
  • 21mm (1/2" Drive)
  • 22mm (1/2" Drive)
  • 24mm (1/2" Drive)
Show More Show Less

24 Pc. 3/8" Drive 6 Point Metric Deep and Standard Socket Set ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:27871809
Part#: 006002SCH01A02KT
In Stock
Sale - Save 28% $ 69.99

This product was last offered at the strikethrough price on
05-05-2026

$ 50.40 USD
Free Shipping on orders $49 and up
Sale - Save 28%
$ 69.99

This product was last offered at the strikethrough price on
05-05-2026

$ 50.40 USD
Free Shipping on orders $49 and up

The Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set comprises two dozen 3/8-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.


Features:

Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.


Includes:

  • 8 mm - deep and standard socket
  • 9 mm - deep and standard socket
  • 10 mm - deep and standard socket
  • 11 mm - deep and standard socket
  • 12 mm - deep and standard socket
  • 13 mm - deep and standard socket
  • 14 mm - deep and standard socket
  • 15 mm - deep and standard socket
  • 16 mm - deep and standard socket
  • 17 mm - deep and standard socket
  • 18 mm - deep and standard socket
  • 19 mm - deep and standard socket
Show More Show Less

Turner BMW 20mm Wheel Spacers (Pair) - Normal Pad
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:6181670
Part#: TWH9905020T
In Stock
Sale - Save 42% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
Sale - Save 42%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Coolant Expansion Tank - E46 (non-M), X3, X5 3.0
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:338020
Part#: 17117573781
In Stock at Vendor
Sale - Save 2% $ 140.99

This product was last offered at the strikethrough price on
04-01-2026

Starting at $ 137.98 USD
Free Shipping
Sale - Save 2%
$ 140.99

This product was last offered at the strikethrough price on
04-01-2026

Starting at $ 137.98 USD
Free Shipping
This coolant reservoir is for the non-M E46 3-series models from 1999-2006 (M3 takes a different expansion tank). We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on. This is the most recent expansion tank design from Hella-Behr, the OEM supplier to BMW. It replaces the original BMW part number 17137787039.

Other items to consider replacing at the same time are the radiator cap, coolant level sensor, lower radiator hose, coolant temp sensor in the lower hose, and the hose clamps. If your car has an automatic transmission you should also replace the oil cooler thermostat in the radiator frame, which is a common source for leaks.

This coolant expansion tank fits:

1999-2006 E46 3 series - 323i, 323Ci, 325i, 325Ci, 325xi, 328i, 328Ci, 330i, 330Ci & 330xi (**no M)
2004-2008 X3 SAV - X3 2.5, X3 3.0, X3 3.0si
2000-2005 X5 SAV - X5 3.0
Show More Show Less
Exterior Temperature Sensor Repair Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:401683
Part#: 65816905133KT2
Ships in 2 Business Days
Sale - Save 24% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 73.87 USD
Free Shipping
Sale - Save 24%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 73.87 USD
Free Shipping

The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

 

Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

Show More Show Less


M50 M52 M54 Liqui Moly Oil Service Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:45552028
Part#: 402762TCK08LIFTI
Ships on Jul 27, 2026
$ 290.42 USD
Free Shipping on orders $49 and up
E53 X5 Rear Coil Spring Conversion Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:401677
Part#: 33536779860KT1
Ships on Aug 3, 2026
Sale - Save 3% $ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.04 USD
Free Shipping
Sale - Save 3%
$ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.04 USD
Free Shipping

Everyone knows the E53 has been notorious for the air ride system to fail. Even BMW technicians will tell you it's not if your air bags will fail, its when. Repairs can become fairly costly as well, with each bag plus labor potential costing you hundreds and hundreds of dollars. Not only that, but the repairs never seem to be permanent, whether its a sensor going off a leaky air bag or the compressor. Get rid of these problems for good, with this Coil Spring conversion kit. Using OEM springs will give you similar ride height as the air ride without compromising handling or comfort.

**Note: Installing this kit will trigger a Self-Leveling Suspension Inactive Light**

Show More Show Less
OEM Accessory Belt Service Kit - E46 E39 E53 M54 (09/2002+)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554445
Part#: M54ACCKT
Back Ordered
Sale - Save 3% $ 249.99

This product was last offered at the strikethrough price on
06-23-2026

$ 242.90 USD
Free Shipping
Sale - Save 3%
$ 249.99

This product was last offered at the strikethrough price on
06-23-2026

$ 242.90 USD
Free Shipping

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
09/2002-2006 E53 BMW X5 M54
09/2002-2003 E39 BMW M54
09/2002-2005 E46 BMW M54

Show More Show Less

Heavy-Duty Expansion Tank With Mechanical Thermostat Conversion Kit &...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:37419798
Part#: 008363LA02EB1KT
Ships in 8 Business Days
Sale - Save 24% $ 1,055.95

This product was last offered at the strikethrough price on
05-05-2026

$ 799.04 USD
Free Shipping on orders $49 and up
Sale - Save 24%
$ 1,055.95

This product was last offered at the strikethrough price on
05-05-2026

$ 799.04 USD
Free Shipping on orders $49 and up

Take your BMW’s cooling system to the next level with this Turner Motorsport Cooling Upgrade Kit. Featuring a Heavy-Duty Aluminum Expansion Tank and a Mechanical Thermostat Conversion Kit, this combo is engineered to deliver ultimate reliability and superior performance for M52TU/M54 engines. Say goodbye to the cooling system failures common in stock setups—Turner Motorsport has you covered.

Turner Motorsport M52TU/M54 Heavy-Duty Expansion Tank Kit

The Turner Motorsport Aluminum Expansion Tank is a premium upgrade designed to replace the fragile factory plastic tank, which is known to crack, leak, or even explode. Crafted for durability, this tank’s all-aluminum construction with wrinkle black powder coating ensures this is the last expansion tank you’ll ever need.

Why Upgrade? The factory plastic tanks on BMW M52TU/M54 engines are notorious for failure under heat and pressure. Avoid the risk of being stranded on the side of the road with a mess of coolant—Turner Motorsport’s aluminum expansion tank is built to withstand years of demanding use and intense heat cycles.

Key Features and Benefits:

Complete Kit: Includes Turner Aluminum Expansion Tank, coolant level sensor, expansion tank cap, and flared coolant pressure release line. OEM Fit & Capacity: Direct fit with no modifications, maintains stock coolant capacity and expansion volume. Baffled Design: Prevents air pockets during aggressive driving and ensures accurate coolant level readings. Premium Construction: TIG-welded 5052 aluminum with machined fittings for factory hose compatibility. Turner Motorsport M52TU/M54 Mechanical Thermostat Conversion Kit

Replace your problematic factory plastic thermostat housing with Turner Motorsport’s high-quality billet aluminum Thermostat Conversion Kit. This upgrade not only provides increased reliability but also allows for thermostat swaps to suit specific temperature requirements, making it ideal for daily drivers and track cars alike.

Why Make the Switch? The factory plastic thermostat housing with its built-in thermostat is prone to cracking and requires the whole unit to be replaced during maintenance. Turner’s conversion kit changes the game by providing a durable billet housing with a replaceable thermostat for flexibility and lower maintenance costs.

Key Features and Benefits:

Increased Reliability: Uses an M50/S50 mechanical thermostat, including an 80°C thermostat for enhanced cooling control. Customizable: Includes barbed hose connections for standard E46 M3 hoses and -16 ORB connections for custom hoses. Engineered to Last: CNC-machined from billet 6061 aluminum and black anodized for corrosion resistance. Enhanced Sealing: Features a Viton gasket for superior durability and sealing performance. Kit Includes:

6061 Billet Aluminum Thermostat Housing 80°C Mechanical Thermostat Thermostat Housing Gasket Thermostat Harness ECS Silicone E46 M3 Cooling Hoses Turner Motorsport Precision Engineering & Product Development

Every component in this cooling upgrade kit has been rigorously designed, engineered, and tested by Turner Motorsport’s Research and Development team. Using state-of-the-art technology such as FARO laser scanning, SolidWorks 3D modeling, and in-house rapid prototyping, Turner ensures that these products meet the highest standards of quality, precision, and durability.

Upgrade your BMW with confidence—Turner Motorsport is your partner in performance and reliability.

Show More Show Less

European Socket Starter Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:41695009
Part#: EUROHEADSET1KT
Ships on Sep 2, 2026
Sale - Save 18% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.15 USD
Free Shipping on orders $49 and up
Exceptional tools designed to handle all types of European fasteners with ease.
Brake Caliper Piston Tool Kit With Protecta Socket Kit & Caliper Hold...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:34919045
Part#: PBK-18PCS2KT
Ships on Aug 28, 2026
Sale - Save 33% $ 135.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.62 USD
Free Shipping on orders $49 and up
Sale - Save 33%
$ 135.99

This product was last offered at the strikethrough price on
05-05-2026

$ 91.62 USD
Free Shipping on orders $49 and up

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.


PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

  • Coated six-point deep-well impact sockets 
  • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
  • 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.


CALIPER HOOK SET:

  • Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
  • Holds brake calipers out of the way while working on brakes
  • Also use to hang other automotive parts and tools while working on your vehicle.
  • Stronger than zip ties or wire.
  • Save the brake hose by not hanging caliper by hose.
  • Made of  thick steel for strength and durability. length is 8"


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

M54 Complete Fuel Injector Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:5416770
Part#: 13537546245TMSKT
Back Ordered
Sale - Save 9% $ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 802.00 USD
Free Shipping
Sale - Save 9%
$ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 802.00 USD
Free Shipping
Includes new injector, fuel rail o-ring and injector holder. A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
Show More Show Less
Basic Cooling System Service Kit - E53 X5 M54 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:557190
Part#: E53X5M54BCKT
Back Ordered
Sale - Save 4% $ 402.99

This product was last offered at the strikethrough price on
02-27-2026

$ 386.06 USD
Free Shipping
Sale - Save 4%
$ 402.99

This product was last offered at the strikethrough price on
02-27-2026

$ 386.06 USD
Free Shipping

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less

OE Engine And Transmission Mount Kit - E53 X5 M54 (Up to 10/2003) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:556244
Part#: E53X56DMKT
Back Ordered
Sale - Save 1% $ 425.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.14 USD
Free Shipping
Sale - Save 1%
$ 425.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.14 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Rein mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • OEM Rein Engine Mount (x2)
  • OEM Rein Transmission Mount (x1)
  • New Installation Hardware
Show More Show Less

High Performance Metal Water Pump & Pulley Kit - M54
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:55749612
Part#: 888010330KT3
In Stock
New Item
$ 299.99 USD
Free Shipping on orders $49 and up
Schwaben Long Low-Profile High-Lift Floor Jack With Aluminum 3-Ton Ja...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:25739361
Part#: 029121SCH01KT
In Stock
Sale - Save 16% $ 499.99

This product was last offered at the strikethrough price on
05-05-2026

$ 417.98 USD
Sale - Save 16%
$ 499.99

This product was last offered at the strikethrough price on
05-05-2026

$ 417.98 USD

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

  • One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
  • Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
  • Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
  • Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
  • Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
  • Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
  • Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
  • Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
  • Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
  • LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

  • Min Height: 2-3/4"
  • Max Height: 24"
  • Handle Length: 49-1/4"
  • Jack Body Length: 35"
  • Length from Pivot Point to Center of Jack Pad: 22"
  • Front Casters: 2-1/2" diameter x 2" width
  • Saddle Diameter: 4" with full saddle pad
  • Weight Capacity: 4000 lbs.
  • ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

  • Min. Height is 10.6".
  • Max Height is 15.4".
  • Large 7" diameter base.
  • Outer support tube is 2-1/8" in diameter.


For replacement parts, please call us and ask for:

  • ES#4430428 - Replacement Screw Set
  • ES#4430429 - Replacement Front Wheel
  • ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
E53 Ditch Light Bracket + LED Lighting Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:41863700
Part#: LEDDITCHLIGHT1KT
In Stock
Sale - Save 23% $ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.99 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.99 USD
Free Shipping on orders $49 and up
This BMW E53 Ditch Light Bracket + LED Lighting Package is a must-have for adventure seekers, overlanders, and weekend explorers who demand reliable lighting and a factory-quality fit. Illuminate the unknown and drive with confidence—on or off the road.
Show More Show Less


Metric Combination Wrench Set & Indexing Pry Bar Set With 100 Piece B...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:34919047
Part#: 005989SCH01A2KT
In Stock
Sale - Save 20% $ 190.99

This product was last offered at the strikethrough price on
05-05-2026

$ 153.69 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 190.99

This product was last offered at the strikethrough price on
05-05-2026

$ 153.69 USD
Free Shipping on orders $49 and up

WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

  • A complete set from 8 to 19 mm 
  • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
  • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
  • Includes sturdy wrench holder for easy storage


INDEXING PRY BAR SET:

Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

Features:

  • Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
  • Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
  • Packaged in a handy molded case for portability and easy organization.


100 PIECE BIT SET:

All the right bits in one box. The perfect assortment to keep the job going.

Features:

  • 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®
  • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing
  • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder
  • Made of hardened Chrome Vanadium steel for years of dependable use
  • Packaged in a handy blow molded case with individually marked bit slots for easy organization


6 PIECE SCREWDRIVER SET:

The Schwaben 6-Piece Screwdriver Set consistently proves its worth over time, delivering exceptional performance across a multitude of tasks. Forged from the unyielding strength of nickel chrome moly, these tools are purpose-built to endure the challenges of consistent use, standing as unwavering companions for a wide spectrum of tasks. Our dedication to your satisfaction is solidified through our LIFETIME REPLACEMENT program, a testament to our promise of keeping this set at your side for as long as you need.

Features:

  • Seamless Color Coding: Effortlessly transition between flat head and Philips head screwdrivers with the intuitive color-coded system. Enhance efficiency and eliminate any guesswork.
  • Optimal Handling Comfort: Engage in tireless operation with ergonomically designed handles that offer both comfort and precision, especially for intricate tasks.
  • Organized Storage: Tucked within a molded tray, these frequently used screwdriver sizes are incredibly portable and thoughtfully arranged, eliminating the frustration of rummaging through tool collections.
  • Essential Variety: Painstakingly curated to cater to diverse needs, the set comprises a range of sizes suited for delicate assignments and robust ventures alike, effectively tending to all your requirements.

Includes:

  • Molded Tray
  • 5.5x100mm flat head screwdriver
  • 6.5x150mm flat head screwdriver
  • 8x175mm flat head screwdriver
  • #1x75mm Phillips screwdriver
  • #2x100mm Phillips screwdriver
  • #3x150mm Phillips screwdriver


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
26 Pc. 1/4" Drive 6 Point Metric Deep and Standard Socket Set ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Enthusiast Bundles - Corporate Logo
T#:27871820
Part#: 003403SCH01A02KT
In Stock
Sale - Save 42% $ 51.99

This product was last offered at the strikethrough price on
05-05-2026

$ 30.12 USD
Free Shipping on orders $49 and up
Sale - Save 42%
$ 51.99

This product was last offered at the strikethrough price on
05-05-2026

$ 30.12 USD
Free Shipping on orders $49 and up

The Schwaben 26 Piece 1/4" Drive 6 Point Deep and Standard Socket Set comprises more than two dozen 1/4-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 50mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 26 Piece 1/4" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.


Features:

Access Tight Spaces: These deep sockets, measuring 50mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.


Includes:

  • 4 mm - deep and standard socket
  • 4.5 mm - deep and standard socket
  • 5 mm - deep and standard socket
  • 5.5 mm - deep and standard socket
  • 6 mm - deep and standard socket
  • 7 mm - deep and standard socket
  • 8 mm - deep and standard socket
  • 9 mm - deep and standard socket
  • 10 mm - deep and standard socket
  • 11 mm - deep and standard socket
  • 12 mm - deep and standard socket
  • 13 mm - deep and standard socket
  • 14 mm - deep and standard socket
Show More Show Less