Griot's Ceramic Headlight Restoration Kit offers an effective solution for restoring severely oxidized and yellowed headlights to pristine clarity. Designed by Griot's Garage, this comprehensive kit is engineered to address foggy, ineffective headlights without the need for power tools. It includes proprietary oxidation removing wipes, a comfortable foam contour grip, and high-quality abrasives to eliminate failed factory coatings. The restoration process is finished with a lifetime ceramic coating from Cerakote Ceramics, ensuring long-lasting protection. The kit contains everything needed: 2 Ceramic Headlight Coating Wipes, a Contour Grip Applicator, foam-backed sanding discs (2x 1000 grit, 1x 2000 grit, 1x 3000 grit), 2 Oxidation Remover Wipes, and 2 protective nitrile gloves.

• Restores Clarity: Removes severe oxidation and yellowing for crystal-clear headlights.
• Easy Application: No power tools required; includes ergonomic foam contour grip.
• High-Quality Abrasives: Foam-backed sanding discs in multiple grits for effective restoration.
• Lifetime Protection: Ceramic coating from Cerakote Ceramics for long-lasting clarity.
• Complete Kit: Includes all necessary components for a successful headlight restoration.

CA residents - WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The switch panel fits in your dash perfectly and features 5 switch ports with an added securing point to manage your wires nice and tidy. To make this switch panel so versatile it was designed to accept a standard rocker/toggle switch with a 1.46" x 0.83" mounting hole. Not only does ECS offer switches specific to your X5 lighting additions but they also have blank switches to control universal electronics and blank switch plates for opportunity to add later! If you want to build your own switch panel with our special made switches see T#16341854

Check out the ECS Youtube "Built by Mike" series! The E53 is a more than capable off-road/overland platform. Some of the first modifications you should make to your overlanding vehicle is lighting, you need to be able to see where you are going when venturing off the beaten path. Whether you are driving through your back yard or climbing rocks in the woods, lighting is essential! Get rid of your under utilized factory ash tray(smoking is bad anyways) and replace it with your own personalized control panel for all of your add on electronics. Lighting is crucial and with specific switches tailored to all of the E53 lighting options you have a full suite of switches to match your lighting upgrades. Dont stop at lighting this switch panel can be used for whatever type of electronics your heart desires!

Switch Panel install and operation can be seen on this "Built by Mike" video on YouTube: HERE

Features:

5 switch panel for direct E53 fitment
ABS plastic construction
Matte black to match the interior
Replaces factory ash tray with no modifications
Retains 12v outlet
Design:

The E53 switch panel idea originated from ECS engineer Mike Day when adding a full build out of lighting to his overland X5. The best ideas come from the people who are in the process of achieving a goal and find a solution to help them complete the job, but better! The switch panel was designed from a 3D scan of the E53 X5 interior and features OEM+ fitment to blend with your interior.

Expand your lighting with this stout mounting system for your E53! Direct fit and aesthetic upgrade for your overland build.

Lighting is a necessity when off-roading, not many times can you add a component that looks this good while also carrying out you utility needs. ECS is now offering a light mounting system for the E53 X5 looks so good we thought about leaving the lights off of it! The light bar features factory mounting with rubber end caps to finish off the installation.

The lighting options with ECS's mounting system are basically endless. The lower bar is 33" in overall width to utilize the factory mounting and features an upper section that spans 24" in diameter. A perfectly proportional setup could include a 24" light bar or up to 4 individual light pods. There are 4 welded and reinforced mounting tabs that span 17" across the bar that are situated 5-3/8" apart from each other which leaves plenty or room for individual lights but can also accommodate almost any light bar you could want.

Common points for mounting aux lighting include the front bumper for long-throw lighting, the roof for high clearance/high perspective lighting, and the base of the A-pillar for ditch lighting. This front mount light bar bracket provides a clean, fully reversible install point for your long throw lighting needs. Fear no ditch, no dark, obstructed, or unknown path through the modern miracle of this beefy front light bar mounting system.

This front light bar mounting system doubles as both a utility for lighting and a rugged aesthetic upgrade. If you are looking to upgrade lighting but are not ready yet, fear not. You can start by adding this awesome light bar mounting system and choose your lighting option later! It looks that good.

Features:

Accommodates 2 large light pods, 4 small light pods, or the light bar of your choosing

Fits Pre-facelift and LCI Models

Optional tow hook attachment (coming soon!)

Design:

Satin black powder coated mild steel tube

Rugged design utilizes factory tow hook mounting locations for sturdy attachment

Exterior coating to match any build

Positioned to allow most lights to clear the hood when opened

If you already got the awesome ECS front light mount and you are missing your optional front towing this add-on is a must!

Modular tow hook and adapter to be used with the E53 front light mount. The front light bar mounting system doubles as both a utility for lighting and towing as a rugged aesthetic upgrade. To fully utilize the utility of the front light mount you will definitely need the add-on tow hook.