BMW Engine Parts for BMW X Series E53 (2000-2006)

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

For Alternator / Water Pump Belt

Hydraulic Belt Tensioner for E36, E46, E39 6-cyl models. This is the oil-filled tensioner that keeps the main drive belt in the proper tension. Over time the piston seals inside allow fluid to leak out. The tensioner becomes frozen or inoperable. Replacement is the best corrective action to take. This can be done during any belt or pulley service or anytime the fan is off the engine.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

NOTE: These BMW's may have been equipped with either a mechanical or hydraulic tensioner. Only for cars with Hydraulic Belt Tensioners. Please check before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i
1999-2000 E46 323i, 323Ci, 328i, 328Ci
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
2001-2006 E46 M3 coupe & convertible
2000-2006 X5 3.0 liter (E53 chassis)
2006 525i, 530i(M54 engine)
1997-2002 Z3 & MZ3 2.8, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

If your vehicle has started leaking coolant around the intake area and it is not the pipes, it is probably the valley pan.

This URO replacement has a high temperature and chemical resistant FKM Fluorocarbon Viton® rubber gasket to reduce the chance of leaks and increase the life of the gasket. This valley pan also features a gasket retention step to keep the gasket in place during installation and also reduce the chance of the gasket blowing out from pressure.

BMW M60 M62 Engine Spark Plugs - Set Of Eight (Platinum+4) are the perfect solution to restore the performance of your BMW's engine. These high-quality Platinum+4 spark plugs are designed to provide a strong and consistent spark, improving idle, fuel efficiency, and overall engine performance. Worn spark plugs can cause poor idling, low fuel economy, and engine misfires, but replacing them with these Platinum+4 plugs ensures a more powerful spark and reduces carbon buildup, enhancing engine efficiency.

For optimal performance, it's recommended to replace all serviceable ignition components, including spark plugs and coil packs. Doing so will ensure your ignition system operates at peak efficiency, improving power and fuel economy.

• Platinum+4 design provides a strong, consistent spark
• Improves idle, fuel efficiency, and overall engine performance
• Reduces carbon buildup for better engine efficiency
• Helps prevent engine misfires and low fuel economy
• Ideal for replacing all ignition components for optimal results

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

This item fits the following BMWs: 
1999-2001  E38 BMW  740i 740il 
1999-2003  E39 BMW  540i 
1999-2003  E53 BMW  X5 4.4i X5 4.6i

Turner Motorsport presents the solution to low oil pressure, increased oil operating temperature, or unusual lifter ticking in your BMW. If your car's sensor triggers a warning light due to pressure issues, it's time to consider the Turner Motorsport Oil Pump replacement. Proper maintenance of the oil pump is crucial for optimal engine function, emphasizing the need for regular oil changes every 3,000 to 5,000 miles. Damaged oil pumps can compromise your vehicle's performance, making replacement essential. When installing a new oil pump, don't forget to replace the oil suction pipe for comprehensive maintenance.

• Improved Oil Pressure: Address low oil pressure concerns for enhanced engine performance.
• Optimized Engine Temperature: Mitigate increased oil operating temperatures for better engine health.
• Reduced Lifter Noise: Eliminate uncommon ticking sounds for a smoother ride.
• Preventive Maintenance: Regular oil changes and pump replacement ensure prolonged engine life.
• Comprehensive Kit: Turner Motorsport recommends replacing the oil suction pipe during the oil pump installation.

Ensure your BMW runs at its best by choosing Turner Motorsport's Oil Pump replacement.

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

This solenoid works with the VANOS engine timing system to improve horsepower and torque throughout the RPM range.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Solenoid Valve (Solv) -
This item fits the following BMW Chassis:
E38,E39,E53 X5

Fits BMW Engines including:
M62,N51