Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 18x8.5" |
| Offset (mm): | 45 |
| Weight (lbs): | 18.2 |
| Profile: | Flat, not concave |
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
07-14-2026
If cutting weight is your main priority, this Trunk Filler Plate is exactly what you need. You can eliminate the carpet and excess plastic and parts without leaving a gaping hole in your trunk. This is a simple drop-in solution that can be easily modified.
Features:
Fits the following vehicles:
E9X BMW M and Non-M Chassis
E82/E88 BMW All submodels
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
FloorLiners are laser measured to protect the front, back and even up the sides of your vehicle's footwell. For ultimate strength and dependability, FloorLiners feature high-density core materials and are engineered with advanced surfacing that carries messes away from shoes and clothing.
Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!
Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.
ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.
This clutch kit is their most popular and features a Heavy Duty pressure plate, a Performance Street sprung clutch disc, and an XACT Streetlite Flywheel.
The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate pedal feel, and heat treated diaphragms for increased strength and performance.
Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.
The final main component is the XACT Streetlite Flywheel. This option is the most popular thanks to it versatility for street driving and drag/track style racing, its lighter weight for increased throttle response, and its single mass design.
Clutch Kit Specs:
This product was last offered at the strikethrough price on
06-05-2026
This product was last offered at the strikethrough price on
06-03-2026
This product was last offered at the strikethrough price on
08-19-2026
This product was last offered at the strikethrough price on
08-19-2026
| #SB533H-2 Variant | Use | Comments |
| "Sport" SPEC steel flywheel | daily driving; occassional drag strip | Use this with the SPEC steel single-mass flywheel. The clutch will be stiffer than the factory design but it will grab harder and stay connected with far less chance of slippage. The engagement point is changed but most drivers adjust within the first 100 miles. The failure-prone dual-mass flywheel is eliminated and a steel single-mass is used instead. Expect more noise and vibration from the steel but better reliability and slightly better performance. |
| "Super Sport" SPEC aluminum flywheel | more drag strip than street | Use this with the SPEC aluminum single-mass flywheel. The clutch will be stiffer than the factory design but it will grab harder and stay connected with far less chance of slippage. The engagement point is changed but most drivers adjust within the first 100 miles. The failure-prone dual-mass flywheel is eliminated and a lightweight aluminum single-mass is used instead. Expect a lot more noise and vibration with aluminum ("gearbox rattle") but better reliability and better performance. The engine will rev a lot faster too. |
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.
H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.
SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING
Height adjustment range:
F: -1.2-2.5"
R: -1.0-1.75"
Eurotuner Magazine did a full tech article on installing this H&R coil over kit in a 135i. For the complete writeup, click here (E82 135i H&R Coil Over).
This coilover fits the following BMWs:
2008-2012 E82 BMW 128i 135i
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
In addition to the weak stock chargepipe, the factory N54 diverter valves can also be a source for boost leaks. The diverter valve takes overboost and re-directs it back through the intake and turbos instead of allowing it to pass into the intake manifold. It's the same as a blow off valve (BOV) but instead of releasing into the engine bay, it stays contained to the engine. The stock diverter valves (DV) are plastic and connect with more plastic into the chargepipe and turbo inlet pipes. The plastic can become brittle and crack even on stock engines and leak boost, which leads to a loss in power and performance.
Turbosmart has developed two kits to replace and upgrade the stock diverter valves - a direct replacement kit and a combination DV/BOV "Dual Port" kit (shown). This Dual Port Kit is a DV and a BOV together in one unit. An internal valve directs some of the charged air into the turbo inlets and the rest is dumped into the engine bay like a traditional BOV. The amount of boost released into the air is determined by an internal spring in the Dual Port unit (additional springs are also available). This allows you to custom tailor how much boost and BOV "whoosh" you hear. In addition to the DV/BOV combo, stronger silicone hose is included to connect them to the turbo inlet pipes (Vargas silicone inlets are recommended). The Turbosmart Kompact Dual Port will give you all of the strength and reliability you need to take your turbo build to the next level.
You will also need T#553932
If you're looking to update or modify the look of your BMWs interior, the pedals are a great place to start. Aluminum pedal covers offer a motorsport-inspired look and improve the driving feel at the same time. While these pedal covers include anti-skid rubber pads to keep your feet firmly in place, the aluminum design makes them much more conducive to advanced driving techniques such as heel-toe braking.
This dead pedal cover completes the trio (or duo if you drive an automatic) by covering the dead pedal or, footrest, and giving you a grippy surface to plant your foot. Pair it with the rest of the set for a complete look!
3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.
Features:
This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2014+ F22 2 Series Coupe 220i 228i 228iX M235i M235iX
2014+ F26 X4 SAC X4 20dX X4 20iX X4 28iX X4 30dX X4 35dX X4 35iX
2015+ F80 M3
2015+ F82 M4 M4 GTS
2015+ F83 M4 Convertible
BMW E60 E9X XACT Flywheel Streetlite is an advanced performance flywheel engineered to offer substantial improvements over stock components. This lightweight flywheel is designed for durability and enhanced performance, making it an excellent choice for both street driving and drag racing.
Upgrade your BMW with the BMW E60 E9X XACT Flywheel Streetlite for enhanced performance and durability.
