Packaged by Turner BMW Maintenance & Tune-Up Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Part of owning a BMW is the relationships we develop with our cars through years of driving pleasure and maintenance services alike. It is critical to guarantee the job is right the first time. With recommended OEM supplied components and by following the maintenance schedule, your BMW is sure to continue giving you years of enjoyment on the street or track. All the filters, service kits, service manuals, fluids, and more are right here to help keep your BMW in perfect shape.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:1241397
Part#: TMSE90N55BPKT
Ships in 1-2 days
$ 624.99 USD
Free Shipping
$ 624.99 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less
E82 135i N55 Build Your Own Maintenance Service Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:338794
Part#: TMS213604
In Stock
Starting at $ 138.98 USD
Free Shipping
Starting at $ 138.98 USD
Free Shipping
Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service
(click to expand)
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • replace drain bolt crush washer
  • reset oil service/maintenance indicator
  • inspect and top off any other fluids
Annual Service
(click to expand)
  • air filter cleaning or replacement
  • MAF/airflow sensor cleaning
  • A/C microfilter/cabin filter replacement
  • brake fluid flush/bleeding
  • top off power steering fluid (make sure you use the correct Pentosin fluid!)
  • wiper blade replacement
  • lubricate door hinges and treat rubber door seals
  • inspect spare tire or tire repair kit, and tire-changing tools
  • inspect drive belt for cracking or stretching
  • inspect intake boots and vacuum lines for cracks
  • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
  • inspect bushing and ball joints for excess play/movement
  • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
40,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • inspect spark plug cavity in valve cover for leaking valve cover gasket
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • serpentine belt replacement
  • inspect belt roller pulleys (drag and rotation) and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
80,000 Mile Major Service
(click to expand)
  • spark plug replacement
  • ignition coil and coil boot inspection and replacement
  • inspect spark plug cavity in valve cover for leaking valve cover gasket
  • engine oil change with filter, using OE BMW 5W30 or Motul
  • reset oil service/maintenance indicator
  • air filter replacement or cleaning for aFe/K&N type
  • fill and bleed cooling system
  • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
  • differential fluid change, using Red Line 75/90 or Motul Gear300
  • brake fluid flush/bleeding
  • fuel filter, pressure regulator replacement
  • serpentine belt replacement
  • replace belt roller pulleys and belt tensioners
  • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
  • complete brake system test and inspection
  • engine and transmission leak detection and diagnosis
  • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
  • exhast system inspection, including hanger replacement
  • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

You may also want to pick up these other helpful items:
  • E90 Bentley Service Manual (not specific to the 1-series but still very helpful)
  • We offer many DIY-related tools, specifically for the 135i owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2011-2012 E82 BMW 135i
    2011-2012 E88 BMW 135i Convertible



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    BMW E8X / E9X Automatic Transmission Service Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    For vehicles equipped with automatic transmission GA6L45R
    Packaged by Turner - Corporate Logo
    T#:21703019
    Part#: E8XE9XTRANSSRVKT
    In Stock
    Sale - Save 2% $ 197.99

    This product was last offered at the strikethrough price on
    04-15-2026

    $ 193.06 USD
    Free Shipping on orders $49 and up
    Sale - Save 2%
    $ 197.99

    This product was last offered at the strikethrough price on
    04-15-2026

    $ 193.06 USD
    Free Shipping on orders $49 and up
    In the routine maintenance of a vehicle, the transmission often takes a back seat. However, neglecting it can have serious consequences. Over time, automatic transmission fluid can deteriorate, resulting in contamination of the valve body and filter by deposits and sludge. This deterioration leads to undesirable issues such as poor shifting, slipping gears, and, ultimately, transmission failure. Our comprehensive kit includes all you need to ensure the health and longevity of your transmission: Automatic transmission filter equipped with necessary hardware Oil pan gasket Drain plug complete with a sealing washer Fill plug with its sealing washer 7 quarts of high-quality Liqui Moly Top Tec 1800 Synthetic ATF Turner Motorsport highly recommends a complete automatic transmission service every 60,000 miles. By addressing your transmission's needs proactively, you'll prevent costly repairs down the road and ensure a smooth and reliable driving experience. Don't overlook this crucial aspect of vehicle maintenance—prioritize your transmission's well-being today.
    Show More Show Less

    Automatic Transmission Service Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15544949
    Part#: 24117552349KT
    In Stock
    Sale - Save 1% $ 215.99

    This product was last offered at the strikethrough price on
    10-01-2026

    $ 214.09 USD
    Free Shipping on orders $49 and up
    Sale - Save 1%
    $ 215.99

    This product was last offered at the strikethrough price on
    10-01-2026

    $ 214.09 USD
    Free Shipping on orders $49 and up
    Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 quarts Liqui Moly automatic transmission fluid
    Show More Show Less

    Timing Chain Kit - N52
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:640351
    Part#: 11317584084KT3
    Ships in 6 Business Days
    Sale - Save 17% $ 595.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 494.62 USD
    Free Shipping
    Sale - Save 17%
    $ 595.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 494.62 USD
    Free Shipping
    Timing chains can cause catastrophic problems with your N52 engine if it doesn't function properly. Common symptoms of failure include excessive vibration or “slap” from the timing chain, and the possibility of plastic particles throughout the oil. Symptoms typically begin to surface between 80,000 and 100,000 miles. If left untouched, the issue can compound itself so far as to allow the timing chain to jump out of time, leaving you with a potentially damaged head and larger repair costs. This kit has been assembled using genuine BMW and high quality aftermarket components. From new timing chain guides, to a replacement oil pan drain plug, this kit has you covered to assure that all the needed parts are on hand and ready to install.
    Show More Show Less
    Basic Cooling System Service Kit - E82/88 E9X N54 3.0L w/ Auto or DCT...
    For vehicles with automatic or DCT transmissions
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:557234
    Part#: E8XE9XN54BCKT
    Ships in 1-2 days
    $ 1,034.99

    This product was last offered at the strikethrough price on
    04-17-2026

    $ 996.99 USD
    Free Shipping
    $ 996.99 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less

    E82 135i N54 Build Your Own Maintenance Service Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338793
    Part#: TMS14352
    In Stock
    $ 105.99

    This product was last offered at the strikethrough price on
    08-31-2026

    Starting at $ 100.54 USD
    Free Shipping
    Starting at $ 100.54 USD
    Free Shipping

    Don't buy into the hype that your car is maintenance-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service, and unbeatable expertise.

    The LL-01 BMW oil specification marks stringent requirements from BMW that oil must meet in order to receive this approval rating. Still used today in many BMW NA and Turbo engines, LL-01 TwinPower Turbo 5w-30 and all LL-01 approved oils are great for ensuring proper wear protection and low fuel consumption, even during high oil change intervals. When BMW LL-04 oil was developed, it was not approved at the time for use in the US. This was due to the high sulfur and ethanol content in US fuels. Originally used mostly for diesel engines and euro motors, LL-04 demand is now starting to pick up with changes in US fuels such as lower sulfur content since 2014 and thanks to LL-04 and LL-01 being interchangeable/compatible. The slight advantage of LL-04 over LL-01 is due to LL-04's higher ZDDP levels and HTHS ratings. This allows for increased engine protection at higher temperatures and engine pressures. In addition, LL-04 also has a lower SAPS level which benefits direct-injection engines, including all BMW turbo engines since 2007.

    5,000 Mile Oil Service

    (click to expand)

    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • reset oil service/maintenance indicator
    • inspect and top off any other fluids

    Annual Service

    (click to expand)

    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid (make sure you use the correct Pentosin fluid!)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire or tire repair kit, and tire-changing tools
    • inspect drive belt for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

    40,000 Mile Major Service

    (click to expand)

    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug cavity in valve cover for leaking valve cover gasket
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation) and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement

    80,000 Mile Major Service

    (click to expand)

    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug cavity in valve cover for leaking valve cover gasket
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter, pressure regulator replacement
    • serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.


    You may also want to pick up these other helpful items:

    • E90 Bentley Service Manual (not specific to the 1-series but still very helpful)
    • We offer many DIY-related tools, specifically for the 135i owner -
      drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
    • SprintBooster throttle enhancement
    • This package fits the following BMWs:
      2008-2012 E82 BMW 135i
      2008-2012 E88 BMW 135i Convertible



      Put a check in the boxes next to the items you wish to order.
    Show More Show Less
    OEM Water Pump And Thermostat Kit - N55 3.0L
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:557277
    Part#: N55WTKT3
    Back Ordered
    $ 806.99 USD
    Free Shipping
    $ 806.99 USD
    Free Shipping

    The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

    Kit includes:

    • OEM Wahler Thermostat
    • OEM VDO Electric Water Pump
    • Genuine BMW Antifreeze/Coolant
    • OEM VDO Mounting hardware required for both the thermostat and water pump
    Show More Show Less

    Level 3 Timing Chain Kit - N54
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:640350
    Part#: TMSN54TMGKT
    Back Ordered
    $ 875.54 USD
    $ 875.54 USD
    The N54 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N54. Tools needed to do the job can be found on our site as well. Kit Contents: 6 Bosch high power spark plugs Genuine BMW timing sprocket wheel 6 Genuine BMW crank pulley bolts Genuine BMW center bolt for crankshaft Febi chain tensioner with gasket Continental accessory belt Febi accessory belt tensioner INA idler pulley with hardware Febi timing chain guide rail and tensioner Genuine BMW timing chain slide rail Genuine BMW bearing bolt IWIS timing chain Victor Reinz valve cover gasket Victor Reinz front crankshaft seal 7 quarts of Genuine BMW synthetic engine oil and a Mann oil filter 1 gal Genuine BMW coolant
    Show More Show Less

    Timing Chain Kit - N55
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:640375
    Part#: 113175840841KT1
    Ships in 3 Business Days
    $ 716.10 USD
    $ 716.10 USD
    The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.
    Show More Show Less
    Automatic Transmission Service Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710756
    Part#: 83222220445-KT
    Ships in 7 Business Days
    $ 424.58 USD
    Free Shipping on orders $49 and up
    Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters Shell M1375.4 automatic transmission fluid
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340253
    Part#: TMS215325
    In Stock
    Sale - Save 5% $ 1,280.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 1,216.77 USD
    Free Shipping
    Sale - Save 5%
    $ 1,280.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 1,216.77 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328 SULEV's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N51 328i SULEV. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, all of the 328 SULEV cooling hoses, and the BMW antifreeze. This package fits 128i/328i SULEV with N51 engine and automatic transmission. Some of the components are different for the automatic models because of the auto transmission oil cooler.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N51 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 SULEV water hoses during this job (see diagram):
    • 17127531579, upper radiator hose
    • 17127531581, lower radiator hose
    • 11537613176, water pump to engine
    • 11537534880, gasket for #176 hose
    • 11537545890, thermostat to cylinder head (includes new o-ring)
    • 17117524710, radiator to auto trans cooler
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 SULEV is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
    Coolant Temp Sensors
    (click to expand)
    There are two coolant temp sensors on the 328 SULEV - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
    13621433077, coolant temp sensor (in lower radiator hose)
    13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N51 engine and an auto transmission:
    2008-2012 E82 BMW 128i SULEV
    2007-2011 E90 BMW 328i 328xi 328i xDrive SULEV - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive SULEV - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive SULEV - Coupe
    2007-2013 E93 BMW 328i SULEV - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less


    Automatic Transmission Service Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677489
    Part#: 24117571217-KT
    In Stock
    Sale - Save 2% $ 240.99

    This product was last offered at the strikethrough price on
    06-01-2026

    $ 235.81 USD
    Free Shipping on orders $49 and up
    Sale - Save 2%
    $ 240.99

    This product was last offered at the strikethrough price on
    06-01-2026

    $ 235.81 USD
    Free Shipping on orders $49 and up
    Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.
    Show More Show Less
    Genuine BMW Oil Change Kit / Inspection I
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677558
    Part#: 009012ECS01-KT
    In Stock
    $ 171.18 USD
    Free Shipping on orders $49 and up
    To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: Seven Quarts of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit) ECS magnetic drain plug
    Show More Show Less
    Manual Transmission Service Kit - E82 1M Coupe
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:31125688
    Part#: TMSE821MMTKT
    In Stock
    $ 99.99 USD
    Free Shipping on orders $49 and up
    The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 Liters of Redline DCTF transmission fluid, which is recommended by Redline for this manual transmission and features a fully synthetic base for better protection and wear resistance, and Genuine BMW fill and drain plugs.
    Show More Show Less

    Oil Drain Plug
    Automatic Transmission Only
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:41188174
    Part#: 11137535106TKT
    In Stock
    Sale - Save 33% $ 8.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 6.00 USD
    Free Shipping on orders $49 and up
    Sale - Save 33%
    $ 8.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 6.00 USD
    Free Shipping on orders $49 and up
    Includes a one time use crush washer.

    Genuine BMW Oil Change Kit / Inspection I
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644287
    Part#: 11427953129-KT
    In Stock
    $ 136.75 USD
    Free Shipping on orders $49 and up
    This kit contains Seven Liters of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
    E82 128i, E9X 328i Auto Cooling Overhaul Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340251
    Part#: TMS214378
    In Stock
    Sale - Save 14% $ 621.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 532.76 USD
    Free Shipping
    Sale - Save 14%
    $ 621.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 532.76 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 328i. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, all of the 328 cooling hoses, and the BMW antifreeze. This package fits 328i/328xi with N52 engine and automatic transmission. Some of the components are different for the automatic models because of the auto transmission oil cooler.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 water hoses during this job (see diagram):
    • 17127531579, upper radiator hose
    • 17127564478, lower radiator hose
    • 11537613176, water pump to engine
    • 11537534880, gasket for #176 hose
    • 11537545890, thermostat to cylinder head (includes new o-ring)
    • 17117524710, radiator to auto trans cooler
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N52 engine and an auto transmission:
    2008-2012 E82 BMW 128i
    2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:15710760
    Part#: N54OCILM-KT
    In Stock
    Sale - Save 6% $ 127.26

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 119.03 USD
    Free Shipping on orders $49 and up
    Sale - Save 6%
    $ 127.26

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 119.03 USD
    Free Shipping on orders $49 and up
    To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Voll-Synthese Energy Engine Oil (0w-40) Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
    Show More Show Less
    Liqui Moly MolyGen Oil Change Kit / Inspection I
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677532
    Part#: 114279531290KT
    In Stock
    Sale - Save 8% $ 143.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 132.37 USD
    Free Shipping on orders $49 and up
    Sale - Save 8%
    $ 143.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 132.37 USD
    Free Shipping on orders $49 and up
    This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit ECS Magnetic Drain Plug with Crush Washer
    Show More Show Less

    E82 128i, E9X 328i 6MT Cooling Overhaul Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340252
    Part#: TMS214377
    In Stock
    Sale - Save 14% $ 704.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 606.77 USD
    Sale - Save 14%
    $ 704.99

    This product was last offered at the strikethrough price on
    05-03-2026

    Starting at $ 606.77 USD
    This cooling overhaul will cover just about everything you could replace on the 328's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N52 328i. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 328i/328xi with N52 engine and manual transmission.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N52 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Cooling Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 water hoses during this job (see diagram):
    • 17127531579, upper radiator hose (A)
    • 17127564478, lower radiator hose (B)
    • 11537552396, water pump to engine ©
    • 11537545890, thermostat to cylinder head (includes new o-ring) (D)
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N52 engine and a manual transmission:
    2008-2012 E82 BMW 128i
    2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less

    E82 128i Build Your Own Maintenance Service Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338791
    Part#: TMS14348
    In Stock
    Starting at $ 377.53 USD
    Free Shipping
    Starting at $ 377.53 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • reset oil service/maintenance indicator
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid (make sure you use the correct Pentosin fluid!)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire or tire repair kit, and tire-changing tools
    • inspect drive belt for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    40,000 Mile Major Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation) and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    80,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Red Line ATFD4 or Motul Multi ATF
    • differential fluid change, using Red Line 75/90 or Motul Gear300
    • brake fluid flush/bleeding
    • fuel filter, pressure regulator replacement
    • serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

    You may also want to pick up these other helpful items:
  • Bentley Service Manual (for the E9X but much of it still applies to the E82 1-series)
  • We offer many DIY-related tools, specifically for the E82/E9X owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2008-2012 E82 BMW 128i



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    E82 1M Build Your Own Maintenance Service Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338795
    Part#: TMS14353
    In Stock
    Starting at $ 126.99 USD
    Free Shipping
    Starting at $ 126.99 USD
    Free Shipping
    Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

    Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

    5,000 Mile Oil Service
    (click to expand)
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • replace drain bolt crush washer
    • reset oil service/maintenance indicator
    • inspect and top off any other fluids
    Annual Service
    (click to expand)
    • air filter cleaning or replacement
    • MAF/airflow sensor cleaning
    • A/C microfilter/cabin filter replacement
    • brake fluid flush/bleeding
    • top off power steering fluid (make sure you use the correct Pentosin fluid!)
    • wiper blade replacement
    • lubricate door hinges and treat rubber door seals
    • inspect spare tire or tire repair kit, and tire-changing tools
    • inspect drive belt for cracking or stretching
    • inspect intake boots and vacuum lines for cracks
    • inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
    • inspect bushing and ball joints for excess play/movement
    • ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)
    40,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug cavity in valve cover for leaking valve cover gasket
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Genuine BMW MTF-LT-5
    • differential fluid change, using Red Line 75/140 or Motul GearComp
    • brake fluid flush/bleeding
    • serpentine belt replacement
    • inspect belt roller pulleys (drag and rotation) and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    80,000 Mile Major Service
    (click to expand)
    • spark plug replacement
    • ignition coil and coil boot inspection and replacement
    • inspect spark plug cavity in valve cover for leaking valve cover gasket
    • engine oil change with filter, using OE BMW 5W30 or Motul
    • reset oil service/maintenance indicator
    • air filter replacement or cleaning for aFe/K&N type
    • fill and bleed cooling system
    • manual transmission fluid change, using Genuine BMW MTF-LT-5
    • differential fluid change, using Red Line 75/140 or Motul GearComp
    • brake fluid flush/bleeding
    • fuel filter, pressure regulator replacement
    • serpentine belt replacement
    • replace belt roller pulleys and belt tensioners
    • complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
    • complete brake system test and inspection
    • engine and transmission leak detection and diagnosis
    • shifter linkage, driveshaft guibo, CV, and center support bearing inspection
    • exhast system inspection, including hanger replacement
    • water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

    You may also want to pick up these other helpful items:
  • E90 Bentley Service Manual (not specific to the 1-series but still very helpful)
  • We offer many DIY-related tools, specifically for the 1M owner -
    drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
  • SprintBooster throttle enhancement
    This package fits the following BMWs:
    2011-2012 E82 BMW 1M N54



    Put a check in the boxes next to the items you wish to order.
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:340254
    Part#: TMS215326
    Ships in 1 day
    Starting at $ 1,233.77 USD
    Free Shipping
    Starting at $ 1,233.77 USD
    Free Shipping
    This cooling overhaul will cover just about everything you could replace on the 328 SULEV's cooling system. We start with the basic water pump and thermostat bundle. These are already vital to the health and durability of the N51 328 SULEV. But to properly maintain these cars for the long term, the rest of the cooling system must be refreshed and preventatively replaced. Here you can add a radiator, expansion tank, cooling hoses, and the BMW antifreeze. This package fits 128/328 SULEV with N51 engine and manual transmission.

    The sophisticated electronics of the ECU and water pump means catastrophic overheating should be a thing of the past. But the downside is that the electronics can shut down without any warning or symptoms. And troubleshooting is equally frustrating since the water pump electronics are not readable or serviceable. There are several clues to a faulty thermostat or water pump - the fan runs at full speed all the time (even immediately on a cold start), pending (soft) fault code for low coolant flow, or the water pump can be heard running constantly. But when the pump fails it's an immediate shut down of the engine which can be a major inconvenience and lead to additional repairs that might have been avoided with preventative maintance. We recommend a full cooling system overhaul on the E90/E92 every 80-90,000 miles and to check for soft/pending codes at every 5,000 mile service .


    Base Cooling Overhaul Package - Water Pump and Thermostat
    (click to expand)
    Includes:
    + Genuine BMW electric water pump, p/n 11517586925
    + mounting screws for water pump (set of 3), p/n 11510392553
    + OEM Behr thermostat, p/n 11537549476
    + Original BMW connecting hose from thermostat to water pump, p/n 11537521049
    + OEM-style hose clamps for hose (x 2)

    The water pump on the N51 engine has more cooling responsibilities than ever before. The good news is that the pump only works when, and only as much, as it needs to. That means the system can actually stop the pump when it doesn't need to be running. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. The preventative replacement is your only insurance from a very inconvenient and costly breakdown in the future. Plus you get the very latest BMW water pump design with any improvements they've made since your original pump was installed.
    Coolant Hoses
    (click to expand)
    With regular driving the hoses should last a very long time. Even the plastic connectors seem to be holding up well. But as a preventative measure new hoses are recommended. We have also seen issues with re-using hoses as the spring connectors get weak over time and may not have the strength to hold the hose in place. They seem to have a tough time holding tension especially when they have been removed and reinstalled. In the interests of a thorough overhaul we recommend replacing these 328 SULEV water hoses during this job (see diagram):
    • 17127531579, upper radiator hose (A)
    • 17127531581, lower radiator hose (B)
    • 11537552396, water pump to engine ©
    • 11537545890, thermostat to cylinder head (includes new o-ring) (D)
      There are other hoses too but they are not often replaced during a radiator swap (radiator vent hose and heater core hose) and they don't see much wear. We offer these as well if you want a complete set (see Additional Items at the bottom of the page).
    Expansion Tank Options
    (click to expand)
    The expansion tank on the 328 SULEV is not prone to failures (unlike previous 3-series cars) so a new one is not strictly required. There aren't many seams or stress points for it to crack and we haven't heard of too many issues. But we wanted to offer it as part of a complete overhaul in case you want to cover everything. Simiarly, the level sensor is not required unless you're getting erroneous 'low coolant' warnings from the dash/iDrive. We do strongly recommend replacing the cap because that is designed to be the weak point in the system. The cap is what regulates the pressure inside the system and it should be replaced every few years anyway.
    Coolant Temp Sensors
    (click to expand)
    There are two coolant temp sensors on the 328 SULEV - in the lower radiator hose and in the cylinder head. Both feed coolant temps to the ECU to regulate the water pump and cooling fan. You should replace the one in the lower radiator hose because it's one of the main sources for coolant leaks, especially when the old sensor is re-used in a new hose. The sensor in the cylinder head is not as prone to leaks and it's easily accessible so you don't have to replace it right away. But we offer it with the package in case you want to have a complete cooling system overahul.
    13621433077, coolant temp sensor (in lower radiator hose)
    13621433076, coolant temp sensor (in cylinder head, next to oil filter housing)

    BUY AS A PACKAGE AND SAVE $$!

    This cooling package fits the following BMWs with the N51 engine and a manual transmission:
    2008-2012 E82 BMW 128i SULEV
    2007-2011 E90 BMW 328i 328xi 328i xDrive SULEV - Sedan
    2007-2012 E91 BMW 328i 328xi 328i xDrive SULEV - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive SULEV - Coupe
    2007-2013 E93 BMW 328i SULEV - Convertible
    Note: not for cars that have the dealer-installed auxiliary heating option. Some of the hoses are different with that option. It's not a very common option in North America (except in parts of Canada) but there are hoses that are specific to that option.


    Click on the options for your kit below and then click "update price" for your kit total.
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:557227
    Part#: E8XE9XN55ABCKT
    Ships in 4 Business Days
    Sale - Save 24% $ 745.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 566.31 USD
    Free Shipping
    Sale - Save 24%
    $ 745.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 566.31 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less
    High-Performance Cooling System Service Kit - Level 1
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:38229085
    Part#: 11517588885KT5
    In Stock
    Sale - Save 8% $ 1,433.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,314.11 USD
    Sale - Save 8%
    $ 1,433.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,314.11 USD

    Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

    The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

    Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

    Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

    Show More Show Less
    Cooling System Refresh Kit - Level 2
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677500
    Part#: 82141467704-KT
    Back Ordered
    Sale - Save 19% $ 832.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 672.46 USD
    Free Shipping on orders $49 and up
    Sale - Save 19%
    $ 832.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 672.46 USD
    Free Shipping on orders $49 and up
    As your mileage increases, so does wear and tear on your engine's cooling components. Cooling system components live a rough life, going through extreme temperature changes and being exposed to the elements. A cooling system failure can, and probably will leave you stranded. For automatic transmission (or DCT) vehicles only This kit includes: Thermostat with mounting hardware 1 gallon of BMW coolant Water pump with mounting hardware Primary cooling system hoses and radiator hose gasket, and bleeder screw Expansion tank with cap Accessory belt
    Show More Show Less

    Basic Cooling System Service Kit - E82/88 E9X N54 3.0L w/ Manual Tran...
    For vehicles with manual transmission
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:557240
    Part#: E8XE9XN54BCKT2
    Back Ordered
    $ 1,035.99

    This product was last offered at the strikethrough price on
    04-17-2026

    $ 996.99 USD
    Free Shipping
    $ 996.99 USD
    Free Shipping

    Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

    To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

    See kit contents below for all included components.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554111
    Part#: 11510392553RKT3
    Back Ordered
    Sale - Save 2% $ 1,658.99

    This product was last offered at the strikethrough price on
    04-14-2026

    $ 1,632.19 USD
    Sale - Save 2%
    $ 1,658.99

    This product was last offered at the strikethrough price on
    04-14-2026

    $ 1,632.19 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

    For vehicles with automatic or DCT transmission only

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557324
    Part#: E9XN54PCKT2
    Back Ordered
    $ 2,180.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,176.86 USD
    Free Shipping
    $ 2,176.86 USD
    Free Shipping

    If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

    Additional items included in this kit:

    • OEM Replacement Coolant Hoses
    • ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
    • ECS Tuning Aluminized Water Pump Hose
    • OEM Expansion Tank, Cap, and Level Sensor
    • OEM Belts, Tensioners, and Pulleys
    • OEM Auxiliary Fan Switch
    • OEM VDO Water Pump
    • Genuine BMW Hardware for Easy Installation
    • Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554121
    Part#: 11537558522KT3
    Back Ordered
    Sale - Save 5% $ 1,571.99

    This product was last offered at the strikethrough price on
    04-14-2026

    $ 1,500.27 USD
    Sale - Save 5%
    $ 1,571.99

    This product was last offered at the strikethrough price on
    04-14-2026

    $ 1,500.27 USD

    This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E82/88 135i or E90/92/93 335i/xi/is with the N54 engine. 

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

    For vehicles with manual transmission only

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:557323
    Part#: E9XN54PCKT
    Back Ordered
    $ 2,160.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 2,155.52 USD
    Free Shipping
    $ 2,155.52 USD
    Free Shipping

    If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

    Additional items included in this kit:

    • OEM Replacement Coolant Hoses
    • ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
    • ECS Tuning Aluminized Water Pump Hose
    • OEM Expansion Tank, Cap, and Level Sensor
    • OEM Belts, Tensioners, and Pulleys
    • OEM Auxiliary Fan Switch
    • OEM VDO Water Pump
    • Genuine BMW Hardware for Easy Installation
    • Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons
    Show More Show Less