BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
$ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,541.54 USD
Free Shipping
Starting at $ 1,541.54 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less
Victor Reinz - Corporate Logo
T#:377087
Part#: 11340034068
Ships in 2 Business Days
$ 54.99

This product was last offered at the strikethrough price on
05-07-2026

$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up
Seal fitted to the end of the valve
Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Innovate Motorsports - Corporate Logo
T#:22558994
Part#: INN3904
In Stock at Vendor
14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

  • Ethanol Content %: 0-100%
  • Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

  • Ethanol Content
  • Error reporting for ethanol content sensor (Digital Display)
  • Fuel Temperature
  • Customizable exterior LED display
  • Programmable exterior LED color options
  • Selectable unit of measure in °F or °C
  • Programmable fuel temperature warning (outer LED)
  • 2-Configurable analog outputs
  • Ethanol Content: 0v = 0%, 5v = 100%
  • Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

High Pressure Fuel Pump Replacement Kit - N55 E Chassis
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15644274
Part#: 13517616170KT
In Stock
$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD
Free Shipping on orders $49 and up
$ 1,743.13 USD
Free Shipping on orders $49 and up
This extensive kit includes a HPFP and associated gaskets to get the job done right!
Lisle - Corporate Logo
T#:5498460
Part#: 75500
Ships in 1 Business Day
$ 48.26 USD
Free Shipping on orders $49 and up
Quickly pinpoint or check for combustion leaks.

VTT Modular Cast Aluminum CNC Valve Cover Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:586044
Part#: VTTN54CASTVC-1-1
Ships in 10 Business Days
$ 759.99 USD
Free Shipping
$ 759.99 USD
Free Shipping
Victor Reinz - Corporate Logo
T#:377137
Part#: 11340035853
Ships in 2 Business Days
$ 58.99 USD
Free Shipping on orders $49 and up
Stop burning oil at start-up

Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships in 10 Business Days
$ 220.99 USD
Free Shipping
$ 220.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Elring - Corporate Logo
T#:379377
Part#: 11117567210
Ships in 1 Business Day
$ 207.99

This product was last offered at the strikethrough price on
05-07-2026

$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
Address pesky oil leaks with this gasket set from BMW
THINKCAR - Corporate Logo
T#:2302718
Part#: 301180767
Ships in 1 day
Sale - Save 32% $ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD
Free Shipping
Sale - Save 32%
$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD
Free Shipping
ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.
High Pressure Fuel Pump Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
In Stock
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less


URO Oil Filter Housing - With Cap
For vehicles with High Speed Synchronization (oil cooler) option
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:640564
Part#: 11428683206
Ships in 1 Business Day
$ 305.99 USD
Free Shipping
$ 305.99 USD
Free Shipping
The aluminum oil filter housings can crack causing oil leaks which leads to a mess and possible engine damage. This Bremmen replacement unit has the oil housing, the oil cooler, sensor and gaskets to get your car sealed up and working properly again all in one go!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
Ships in 1 Business Day
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Rein Turbocharger Vacuum Reservoir - E chassis - N54
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:53856273
Part#: 11652247620
Back Ordered
New Item
Sale - Save 8% $ 26.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 26.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.74 USD
Free Shipping on orders $49 and up
The Rein Automotive OE Series vacuum reservoir is engineered to maintain peak pneumatic response within your vehicle’s forced induction system.

Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

Hella - Corporate Logo
T#:592708
Part#: 3001651
Ships in 1 Business Day
$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD
Free Shipping on orders $49 and up
$ 124.99 USD
Free Shipping on orders $49 and up
Get noticed with this air horn kit from Hella!
CTS - Corporate Logo
T#:23185032
Part#: CTSIT900
In Stock
Sale - Save 15% $ 189.99

This product was last offered at the strikethrough price on
08-26-2026

$ 161.49 USD
Free Shipping
Sale - Save 15%
$ 189.99

This product was last offered at the strikethrough price on
08-26-2026

$ 161.49 USD
Free Shipping

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

  • Designed for use with TiAL Q atmospheric blowoff valve
  • Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
  • CNC machined MAP sensor flange for seamless OEM installation
  • Includes 4-ply silicone connectors and stainless steel clamps for secure fit
  • Features two water-methanol bungs and laser-etched CTS Turbo logo
  • Enhances boost holding capacity and provides an aggressive aftermarket sound
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships in 10 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Nostrum - Corporate Logo
T#:9609825
Part#: H703-1257
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.
Show More Show Less

5150 Autosport - Corporate Logo
T#:31755188
Part#: 5150-TBK-N55-100
Ships in 3 Business Days
$ 6,099.99 USD
$ 6,099.99 USD
The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

Bosch - Corporate Logo
T#:373812
Part#: 12317558220KT1
Ships in 1 Business Day
$ 1,029.99

This product was last offered at the strikethrough price on
04-10-2026

$ 704.99 USD
Free Shipping
$ 704.99 USD
Free Shipping
Replace your dead alternator with this new unit and make sure your battery is being charged properly. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products. Includes a $195.00 core charge to be refunded after we receive your refundable core.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398498
Part#: VTT-N54-CHRA-1-T
Ships in 10 Business Days
$ 808.99 USD
Free Shipping
$ 808.99 USD
Free Shipping
Direct OEM replacements with upgraded TD04 thrust assembly - These are a direct replacement for the factory turbocharger. New or reman bearing housing will be used, reman turbine wheel, reman factory compressor wheel. All brand new internals using the upgraded TD04 thrust assembly.
Show More Show Less
Mitsubishi Turbocharger - Corporate Logo
T#:388387
Part#: 11657649291
Ships in 1 Business Day
$ 1,129.99 USD
Free Shipping
$ 1,129.99 USD
Free Shipping
This is OEM replacement rear (bank 2) turbo assembly for the N54 engine in the 2007-2010 135/535. This is a new turbo from Mitsubishi, not a rebuilt unit. Mitsubishi is the original supplier to BMW for the N54 turbos. This is a complete assembly, including the manifold to the engine and the wastegage. It's highly likely N54 turbos will have to be replaced before 100,000 miles. Signs of a failing turbo are high oil consumption and blue smoke from exhaust (not from a leak or failing CCV system) because the internal oil seals are no longer retaining oil. Without critical lubrication and cooling effects from oil, the turbo shafts and bearings are usually the first to wear and that requires a complete rebuild. You might also see increased turbo lag or failure to hold boost, which is usually a sign of a failing wastegate or some other internal issue. With any internal problems the turbos need to be replaced. This is a new turbo so no core charge applies.
Show More Show Less


Victor Reinz - Corporate Logo
T#:583856
Part#: 11127582245
Ships in 1 Business Day
$ 57.99

This product was last offered at the strikethrough price on
05-07-2026

$ 56.99 USD
Free Shipping on orders $49 and up
$ 56.99 USD
Free Shipping on orders $49 and up
This valve cover gasket set includes the valve cover gasket and the spark plug gasket. It fits BMW's with the N51, N52 or N52N engines.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2004-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMw 528i
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2007-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
Vaico - Corporate Logo
T#:34114245
Part#: V20-3674
In Stock
$ 827.99

This product was last offered at the strikethrough price on
05-07-2026

$ 500.99 USD
Free Shipping on orders $49 and up
$ 500.99 USD
Free Shipping on orders $49 and up

If your N52 engine is running rough, is low on power, or you are getting check engine lights for timing related issues, there is a good chance that you have a faulty VANOS component. The two most common parts to fail are the Camshaft Adjusters and VANOS Solenoids.

This repair kit from Vaico includes all of the basic parts necessary to service the VANOS system and restore smooth engine operation.

Included:

Intake Camshaft Adjuster w/ Impulse Wheel

Exhaust Camshaft Adjuster w/ Impulse Wheel

Camshaft Adjuster Bolts

VANOS Solenoid Valves

Valve Cover Gasket Set

Show More Show Less
FrankenTurbo - Corporate Logo
T#:51391251
Part#: F54TTN54-135
Back Ordered
New Item
$ 1,999.00 USD
$ 1,999.00 USD
The F54 Super-TD04 kit is FrankenTurbo’s "no-compromise" twin-turbo upgrade for N54 owners who want single-turbo power levels with twin-turbo response.

Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 5 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Secondary Air Injection Pump - E82 E88 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:2824948
Part#: 11727557903
Ships in 1 Business Day
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping
The secondary air injection pump injects fresh air into the exhaust stream to help burn off harmful pollutants in the catalytic converter. If the injection pump begins to fail, since it is a vital part of the emissions system, a fault code will be triggered. Sometimes, when pulling off the lower secondary air pipe, you may see water pour out. This is a sign that your pump is more than likely faulty. By simply replacing this pump, efficiency can be restored and there will be no worry about failing an emissions test.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships in 10 Business Days
$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping

Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Sep 23, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
VTT CNC ORB Plug - -10AN
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:642075
Part#: VTT-10ORB
Ships in 10 Business Days
$ 23.99 USD
Free Shipping
$ 23.99 USD
Free Shipping

Conti Tech Rubber High-Pressure Hose
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:378830
Part#: N0202811
Ships in 3 Business Days
$ 34.22 USD
Free Shipping on orders $49 and up
7mm O.D X 2.5mm I.D.

Race German - Corporate Logo
T#:7703242
Part#: RGIFPA
Ships in 3 Business Days
$ 23.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.
Show More Show Less
FrankenTurbo - Corporate Logo
T#:51391257
Part#: F650PWG-E8X
In Stock
New Item
$ 1,799.00 USD
$ 1,799.00 USD
FrankenTurbo's F60 is the tier-one choice for N55 owners seeking 550–650+ horsepower without the lag associated with massive single-turbo kits.
Elring - Corporate Logo
T#:2691335
Part#: 11117548101
Ships in 1 Business Day
$ 181.83 USD
Free Shipping
$ 181.83 USD
Free Shipping
OEM Elring crankcase gasket set for your BMW N52 3.0L engine


PFS - Corporate Logo
T#:590135
Part#: E90BUCKETSTKSS
Ships in 10 Business Days
$ 551.99 USD
Free Shipping
$ 551.99 USD
Free Shipping
Walbro - Corporate Logo
T#:371990
Part#: PMPWINLINE
In Stock
$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping

The Walbro 255 is often a choice for N54 and N55 owners when the factory high flow fuel pump is not satisfactory.

Note that this fuel pump will require some additional wiring to work in your particular vehicle.

Show More Show Less
URO - Corporate Logo
T#:33446276
Part#: 11427573212
Ships in 1 Business Day
$ 143.99 USD
Free Shipping on orders $49 and up
An engine oil thermostat allows oil to bypassing the cooler until the oil has reached its minimum operating temperature.

URO In-Tank Fuel Pump - E82, E88, E90, E92, E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593025
Part#: 16147194207
In Stock
$ 258.99 USD
Free Shipping
$ 258.99 USD
Free Shipping
Replace your failed fuel pump

DeatschWerks - Corporate Logo
T#:5389791
Part#: 9-401-1001
In Stock at Vendor
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.
Show More Show Less
135i/535i VTT N54 F-RB+ Turbocharger Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:26504936
Part#: VTT-N54-FRB
Ships in 10 Business Days
$ 3,599.99 USD
Free Shipping
$ 3,599.99 USD
Free Shipping

ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.
URO Oil Cooler - Multiple BMWs
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:588783
Part#: 11427525333
In Stock
$ 66.99 USD
Free Shipping on orders $49 and up
Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55
Show More Show Less

Lower Idler Pulley
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:384427
Part#: 11287557851
Ships in 1 Business Day
$ 23.99 USD
Free Shipping on orders $49 and up
The lowest of the idler pulleys on the accessory drive belt. Featuring NTN/NSK bearing.

5150 Autosport - Corporate Logo
T#:23416508
Part#: FER-HPVK-S55-T-3
Ships in 3 Business Days
$ 929.99 USD
Free Shipping on orders $49 and up
Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!
Show More Show Less
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less
Victor Reinz Cylinder Head Gasket - E60, E61, E71, E82, E88, E90, E92...
1.52mm (+0.30) thickness - for use with a machined head
Victor Reinz - Corporate Logo
T#:373831
Part#: 11127557266
Ships on Sep 23, 2026
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
.30 thicker than stock


Vargas Turbo Technologies - Corporate Logo
T#:18733527
Part#: VTT-CRANKHUB-2
Ships in 10 Business Days
$ 871.99 USD
Free Shipping
$ 871.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Rocker Cover
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38419084
Part#: 11127570292
In Stock
$ 350.99 USD
$ 350.99 USD
If your valve cover is cracked or warped, replace it with this Febi part to avoid leaks and prevent additional valvetrain damage. You will also need to purchase (2) 11367609963 self-tapping screws for proper valve cover installation.
Show More Show Less