BMW Cooling System Parts & Accessories for BMW 1 Series E82 (2008-2013)

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• OEM Wahler Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM VDO Mounting hardware required for both the thermostat and water pump

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

• Allows hose to run straight down, increasing clearance
• Made of durable 6061-T6 aluminum for long-lasting performance
• Anodized black finish for enhanced durability and corrosion resistance
• Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

• Upgraded Billet 6061-T6 connectors for enhanced durability
• Corrosion-resistant black anodized finish
• 6-ply molded silicone hoses for superior performance
• Factory-shaped design for easy installation

The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.

With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.

Features:

Key Benefits:

Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Moroso part (63324) racing radiator cap included; operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks This aluminum tank can be polished, chromed, powder coated or left as-is