VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

ECS Heavy Duty Ground Cable Upgrade (12427549393) - E9X, E82/E88, E84...

10X Entries Into Our F80 M3 Sweepstakes

T#:48367010

Part#: 059226LA01

In Stock

Sale - Save 3% $ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 3%

$ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12427549393, 12427795404, and 12427790559.

Show More Show Less

ECS Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55 S58 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:363147

Part#: 003296ECS01

Ships on Sep 29, 2026

Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD

Add to Wish List

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.

Valvetronic Actuator Replacement Kit Genuine BMW - N55 S55 3.0L ...

T#:599758

Part#: 11377603979KT1

In Stock

$ 659.99 USD

Add to Wish List

Qty

$ 659.99 USD

Add to Wish List

Valvetronic Actuator Replacement Kit

Revitalize your engine's Valvetronic system with the Valvetronic Actuator Replacement Kit. This comprehensive kit includes the Valvetronic actuator, actuator gasket, and valve cover gaskets, ensuring a complete overhaul for optimal performance. Crafted to OEM specifications, these components guarantee precise fitment and reliable functionality. Say goodbye to Valvetronic issues and restore your engine's efficiency with this all-in-one replacement kit.

Show More Show Less

ECS Heavy Duty Ground Cable Upgrade (12427549396) - E9X AWD

10X Entries Into Our F80 M3 Sweepstakes

T#:48642696

Part#: 059226LA02

In Stock

Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.24 USD

Add to Wish List

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427549396.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Valvetronic Actuator - N20 2.0L, N55 3.0L

T#:34786

Part#: 11377603979

In Stock

5% off MSRP $ 618.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 589.28 USD

Add to Wish List

Qty

5% off MSRP

$ 618.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 589.28 USD

Add to Wish List

Genuine BMW Actuator -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Genuine BMW Power Distribution Box - E82/88 E9X

T#:10501

Part#: 61146971370

In Stock

5% off MSRP $ 127.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

Qty

5% off MSRP

$ 127.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

This is found on the top of the battery

Genuine BMW Oil Level Sensor - Multiple BMWs

T#:13104

Part#: 12617607910

In Stock

14% off MSRP $ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD

Add to Wish List

Qty

14% off MSRP

$ 298.81

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 257.99 USD

Add to Wish List

This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.

Genuine BMW Engine Block Fastener Set

T#:30558

Part#: 11110426591

In Stock

$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.80 USD

Add to Wish List

Qty

$ 104.80 USD

Add to Wish List

Genuine BMW Set Of Aluminum Screws F Compl.Crankcase
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N54,N54T,N55

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - For 601-0021 & 601...

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Precision Raceworks' BMW N54 / N55 replacement spark plug wires are the same plug wires that are included in their High-Performance Ignition Kits 601-0021 & 601-0021-1

Genuine BMW Cylinder Head Gasket - N55

T#:22186

Part#: 11127599212

In Stock

14% off MSRP $ 233.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.09 USD

Add to Wish List

Qty

14% off MSRP

$ 233.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.09 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Cylinder Head Gasket Asbestos-Free - 1,20Mm
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Timing Chain Tensioner With Guard Rail - N52 3.0L, N55 3....

T#:34073

Part#: 11317585020

In Stock

12% off MSRP $ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD

Add to Wish List

Qty

12% off MSRP

$ 101.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 89.12 USD

Add to Wish List

Genuine BMW Chain Tensioner And Guide Rail -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N55,S55

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Oil Cooler Pipe - Feed

T#:46873

Part#: 17227567207

In Stock

2% off MSRP $ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD

Add to Wish List

Qty

2% off MSRP

$ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD

Add to Wish List

Genuine BMW Engine Oil Cooler Pipe, Flow -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N54,N54T,N55

Genuine BMW N55 Valve Cover - 11127570292 (includes gasket)

T#:31463

Part#: 11127570292

In Stock

4% off MSRP $ 660.72

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 632.99 USD

Add to Wish List

Qty

4% off MSRP

$ 660.72

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 632.99 USD

Add to Wish List

A cracked valve cover can cause a myriad of problems none of which are inexpensive. A simple oil leak may prove nothing more than a driveway nuisance; however, the damage that can occur as a result of low oil do more to drain the wallet. A small vacuum leak may cause only a minor hesitation but the reduced efficiency means less mpg's and more trips to the pump. This factory replacement valve cover will get you back on the road and ensure a solid and tight seal along the top end of the engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Cylinder Head Cover -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Camshaft Position Sensor - N20 N52 N54 N55 - E9X F30 E60 F10 + ...

T#:12665

Part#: 13627525014

In Stock

9% off MSRP $ 166.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.53 USD

Add to Wish List

Qty

9% off MSRP

$ 166.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.53 USD

Add to Wish List

This is the a replacement camshaft sensor for BMW's with N20 N26 N51 N52 N54 N55 N63 S55 S63 engines. This can be used for either the exhaust or intake camshaft.

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

CTA Tools Valve Spring Compressor Kit

T#:584140

Part#: CTA2112

In Stock

$ 115.45 USD

Add to Wish List

Qty

$ 115.45 USD

Add to Wish List

Replaces valve springs and valve stem oil seals without the need to remove the cylinder head

Genuine BMW Spark Plug Recess Insert - 11127605104

T#:31542

Part#: 11127605104

Ships in 3 Business Days

7% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Qty

7% off MSRP

$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD

Add to Wish List

Genuine BMW Spark Plug Recess Insert -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Repair Kit Piston Rings - 11257610297

T#:33540

Part#: 11257610297

Ships in 3 Business Days

5% off MSRP $ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD

Add to Wish List

Qty

5% off MSRP

$ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N54,N54T,N55

Show More Show Less

Genuine BMW Cam Bearing Ledge - Exhaust - N52 N54 N55 3.0L

T#:31384

Part#: 11127531224

In Stock

17% off MSRP $ 706.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 586.49 USD

Add to Wish List

Qty

17% off MSRP

$ 706.36

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 586.49 USD

Add to Wish List

Genuine BMW Bearing Ledge Exhaust

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Timing Chain - N55 N20 N52

T#:213898

Part#: 11318648732

In Stock

7% off MSRP $ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Qty

7% off MSRP

$ 128.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Genuine BMW Timing Chain - 11318648732

Genuine BMW Engine Oil Level Sensor with O-Ring

T#:177100

Part#: 12618608780

Ships in 3 Business Days

8% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

Qty

8% off MSRP

$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

Genuine BMW Oil Levelling Sensor -
This item fits the following BMW Chassis:
F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,N63N,S55

Show More Show Less

Genuine BMW Timing Chain Tensioner

T#:395334

Part#: 11318685091

In Stock

6% off MSRP $ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Qty

6% off MSRP

$ 93.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Newest revision of N20/N26 timing chain tensioner from BMW. Replaces part number 11317567680.

Genuine BMW Chain Tensioner -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Oil Cooler Thermostat Housing - E90 E92 E60 E82 N54 N55

T#:20650

Part#: 11427573212

In Stock

17% off MSRP $ 198.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.43 USD

Add to Wish List

Qty

17% off MSRP

$ 198.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.43 USD

Add to Wish List

Replace the oil filter housing/oil cooler thermostat housing with the thermostat on your BMW equipped with either the N54 or N55 6 cylinder turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2011-2013 E82 BMW 135i 135is 1M Coupe
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
2013+ F01 BMW 740i 740li 740li xDrive i
2013+ E84 BMW X1 xDrive35i

Show More Show Less

Genuine BMW Spark Plug - Set Of 4 - N20, N26 2.0L

T#:341303

Part#: 12120039664KT

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Periodic spark plug replacement prevents many common problems caused by worn, contaminated plugs, including misfire, reduced power and fuel economy, and an illuminated Check Engine Light. Fresh plugs promote good engine performance and fuel economy, while reducing engine misfire that stresses and damages expensive ignition coils and catalytic converters.

Show More Show Less

Genuine BMW Fuel Feed Line - 16127172162 - E90,E92,E93

T#:44920

Part#: 16127172162

Ships in 3 Business Days

6% off MSRP $ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Qty

6% off MSRP

$ 110.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Genuine BMW Fuel Feed Line -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N20,N52,N52N,N54,N54T,N55

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Genuine BMW Oil Cooler Pipe - Return

T#:46874

Part#: 17227567208

In Stock

2% off MSRP $ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.20 USD

Add to Wish List

Qty

2% off MSRP

$ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 245.20 USD

Add to Wish List

Genuine BMW Engine Oil Cooler Pipe, Return -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N54,N54T,N55

Genuine BMW Chain Tensioner - With Gasket Ring

T#:361172

Part#: 11317584723

In Stock

7% off MSRP $ 111.85

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Qty

7% off MSRP

$ 111.85

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

High Pressure Pipe

T#:42219

Part#: 13537576771

Ships in 3 Business Days

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Solenoid Valve - 11368605123 - N55 N63 S63

T#:174293

Part#: 11368605123

In Stock

$ 260.68 USD

Add to Wish List

Qty

$ 260.68 USD

Add to Wish List

Genuine BMW Solenoid Valve (Solv)

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,E82,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,N63,N63N,S55,S63,S63N

Show More Show Less

Genuine BMW Piston Ring Repair Kit

T#:174275

Part#: 11257594453

Ships in 3 Business Days

5% off MSRP $ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD

Add to Wish List

Qty

5% off MSRP

$ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 121.99 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW N20 2.0L High-pressure Rail - 13537585411

T#:42237

Part#: 13537585411

Ships in 3 Business Days

6% off MSRP $ 442.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

6% off MSRP

$ 442.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Genuine BMW N20 2.0L High-pressure Rail

Genuine BMW N20 2.0L High-pressure Rail is an essential component designed to enhance the fuel delivery system of your BMW. This high-pressure rail ensures optimal fuel pressure for the N20 2.0L engine, leading to improved performance and efficiency. Manufactured with precision and using premium materials, it guarantees durability and reliable operation, aligning with BMW's high standards.

Ensures optimal fuel pressure for enhanced engine performance
Precision-engineered to fit perfectly with BMW N20 2.0L engines
High-quality materials for long-lasting durability
Improves fuel efficiency and overall vehicle performance
Easy installation for seamless replacement

Upgrade your BMW’s fuel system with the Genuine BMW N20 2.0L High-pressure Rail and experience superior performance and efficiency.

Genuine BMW High-Pressure Rail -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Vibration Damper

T#:32906

Part#: 11237574827

In Stock

Sale - Save 8% $ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.25 USD

Add to Wish List

Qty

Sale - Save 8%

$ 98.99

This product was last offered at the strikethrough price on
08-26-2026

$ 91.25 USD

Add to Wish List

Genuine BMW Hub -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Fuel Tank Breather Valve with Breather Line - E82 E88 E92...

T#:43824

Part#: 13907636153

In Stock

2% off MSRP $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Qty

2% off MSRP

$ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 140.99 USD

Add to Wish List

Genuine BMW Fuel Tank Ventilation Valve With Pipe -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F22,F30,F32,F33,F36

Fits BMW Engines including:
N55

Show More Show Less

Valve Cover Gasket Replacement Kit - N20

T#:641577

Part#: 11127588418KT

In Stock

$ 121.99

This product was last offered at the strikethrough price on
06-04-2026

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

A complete kit for replacing your leaky valve cover gasket. Kit includes: Valve cover gasket set Vacuum pump seals Valvetronic actuator seals Hardware

Genuine BMW Guide Rail - 11417618941

T#:180999

Part#: 11417618941

Ships in 3 Business Days

Sale - Save 8% $ 94.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.85 USD

Add to Wish List

Qty

Sale - Save 8%

$ 94.99

This product was last offered at the strikethrough price on
08-26-2026

$ 87.85 USD

Add to Wish List

Genuine BMW Guide Rail -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Lower Timing Chain Tensioner With Guide Rail

T#:180378

Part#: 11317592877

Ships in 4 Business Days

9% off MSRP $ 96.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Qty

9% off MSRP

$ 96.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Genuine BMW Chain Tensioner And Guide Rail -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N51

Show More Show Less

Engine Harness

T#:39957

Part#: 12517592508

In Stock

5% off MSRP $ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD

Add to Wish List

Qty

5% off MSRP

$ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 166.99 USD

Add to Wish List

Genuine BMW Wiring Loom, Eng., Valvetronic Servomtr -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Timing Chain Tensioner - F8X N55

T#:181000

Part#: 11417618943

Ships Today

6% off MSRP $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Qty

6% off MSRP

$ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Genuine BMW Chain Tensioner

Genuine BMW Fuel Hose - 1 Meter

T#:41534

Part#: 13311272750

Ships in 3 Business Days

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Genuine BMW Oil Level Sensor - Multiple BMWs

T#:555578

Part#: 12617607910KT

In Stock

$ 263.99 USD

Add to Wish List

Qty

$ 263.99 USD

Add to Wish List

This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring and mounting nuts.

Show More Show Less

Genuine BMW Boost pressure solenoid

T#:177074

Part#: 11747649407

In Stock

Sale - Save 10% $ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 10%

$ 204.99

This product was last offered at the strikethrough price on
08-26-2026

$ 184.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Pressure Converter -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Ignition Coil - Set Of Six

T#:359459

Part#: 12138616153S6KT

In Stock

$ 521.99

This product was last offered at the strikethrough price on
08-04-2026

$ 516.99 USD

Add to Wish List

Qty

$ 516.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW X Series E84 (2013-2015)

Sub-Categories

Valvetronic Actuator Replacement Kit

Genuine BMW N20 2.0L High-pressure Rail

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results