Bring out the sound of your turbo with the ECS Atmospheric Diverter Valve Spacer! The ECS DV Spacer gives your N20 the sound of a blow off valve (BOV) with every gear change and every boosted throttle close! The strategically engineered vent slots allow you to boost on without a CEL (Check Engine Light).

FEATURES:

Anodized Black 6061-T6 aluminum

Features 3 radial slots to let out the “woosh” with optimal flow for all OEM DV types

Engineered to operate CEL-FREE!

Alignment holes for ease of installation

Includes pre-installed, captured Viton O-rings, resistant to chemical degradation

Includes Zinc-plated alloy steel socket head cap screws

Tested for performance and durability

INSTALLATION:

Remove Diverter Valve
Place the spacer onto the DV flange r
Re-install your original DV solenoid atop the spacer with the included longer hardware.
The wastegate actuator must be swung out of the way for install. Loosen both screws retaining the wastegate actuator, then remove the one closest to the actuator, allowing the actuator to swing out of the way. This will allow for ease of installation.

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For front calipers on E90/2 and E60. For rear calipers and all caliper on other models, click here. 

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Pre-Installed Factory "Quick-Connect" Flanges (4)
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127

Elevate your BMW's security with the BMW Conical Seat Locking Wheel Bolt Kit. This comprehensive kit provides peace of mind by securing your wheels against theft. Engineered specifically for BMW vehicles, these locking wheel bolts offer a precise fit and reliable performance. Say goodbye to worries about wheel theft and enjoy enhanced protection for your BMW with this essential locking bolt kit.

• Enhances security for BMW wheels
• Precision engineered for a perfect fit
• Provides peace of mind against wheel theft
• Specifically designed for BMW vehicles

Upgrade Your BMW's Wheel System with a Stud Conversion Kit

Upgrade your BMW's wheel system with a stud conversion kit, designed to facilitate quicker and easier wheel changes. This kit comprises Conical Seat Lug Nuts (10) and 70mm Wheel Studs (10), ensuring hassle-free and time-saving wheel swaps. Simply install the provided studs, granting permanent wheel hangers for effortless wheel mounting.

Key Benefits:

• Permanent wheel hangers for simplified and quicker wheel changes
• Enhanced confidence in wheel-to-hub contact, ideal for racing purposes
• Accommodates various spacer widths, eliminating the need for custom lengths
• Facilitates easier wheel installation, using studs as wheel hangers while nuts secure the wheel
• Reduces wear on wheel hubs, enhancing longevity
• Streamlines tire changes with studs remaining in the hub for swift removal/installation

Upgrade your BMW's wheel setup effortlessly and ensure quicker wheel changes with a stud conversion kit, offering improved wheel-to-hub contact, ease of installation, and reduced wear on wheel hubs.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation

BMW E3X Wheel Stud Conversion Kit - Half set

Enhance your BMW E3X's performance and safety with the BMW E3X Wheel Stud Conversion Kit - Half set. This kit allows for easy conversion from lug bolts to wheel studs, providing a more secure wheel mounting solution. Engineered for durability and reliability, it ensures optimal wheel alignment and reduces the risk of stud breakage. Upgrade your BMW E3X with this premium wheel stud conversion kit today.

• Easy conversion from lug bolts to wheel studs
• Provides a more secure wheel mounting solution
• Ensures optimal wheel alignment
• Reduces the risk of stud breakage for improved safety

Safeguard your valuable BMW wheels from potential theft using ECS Tuning Wheel Lock sets, providing additional peace of mind without necessitating expensive alterations. These wheel locks, replacing one wheel bolt, come equipped with a special socket tool for straightforward removal, ensuring the security of your prized wheels.

• Safeguards expensive wheels from theft
• No need for costly alterations
• Each set includes a special socket tool for easy removal
• Factory bolt length (28mm) with conical seat design for compatibility with most aftermarket wheels
• Caution: Avoid overtightening or using air tools
• Lock keys designed for a specific bolt orientation

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

• Aluminum hats for light weight
• Heat-treated cast iron friction rings
• 2-piece assembly improves brake cooling
• Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 330i 330xi 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible