BMW Tools & Specialty Equipment for BMW Z Series E85/6 (2003-2008)

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage. By using a non-marring plastic you can safely and easily remove trip pieces with confidence

?

Features:

• Pull-type remover

• Narrow edge remover

• Wide edge remover

• Handle remover

• Upholstery clip remover

Our 3/8-inch drive, 36mm, 6-point socket grips tight and won’t slip. Low profile oil filter housing removal socket fits in tight places. 

• BMW M52 and M54
• MINI Gen 1 (R50, R52, and R53)

The Foxwell i53BT Scan Tool is the next step toward understanding why that BMW Service Engine Soon (check engine light) came on - but in a sleek, modern context that surpasses older Foxwell models (such as the NT510 or NT530).  This diagnostic tool does almost everything that you could think of in scanners, outside of some control module coding and programming that would require a much more expensive scanner or software found mostly at dealerships.  The features on this product stand out more than previous models and make it a very impressive tool at an even better price.

New Features:

• BMW and MINI Software Compatibility: Equipped with specialized software for BMW and MINI vehicles.
• High-Speed Android Operating System: Utilizes a fast Android operating system and interface, enhancing accuracy and speed in troubleshooting.
• 5.5” LCD Touchscreen: Features a responsive 5.5” LCD touchscreen that can be operated with gloves on.
• Bluetooth Wireless VCI Vehicle Interface: Offers a cordless OBD2 experience through a Bluetooth wireless Vehicle Communication Interface (VCI) plug.
• Supports DoIP and CAN FD Protocols: Compatible with Diagnostics over Internet Protocol (DoIP) and Controller Area Network Flexible Data-rate (CAN FD) protocol.
• One Touch Update via WIFI: Enables quick and seamless updates through a one-touch process via WIFI.
• One Touch Complaint Feature: Facilitates faster and more accurate issue resolution with its One Touch Complaint functionality.
• Remote Control Support: Provides access to remote control support via TeamViewer directly from the scanner home screen.
• Data Logging Service: Allows collection of communication data between the scanner and the tested vehicle, streamlining diagnostic troubleshooting.
• Wireless Diagnostic Report Printing: Supports wireless printing of diagnostic reports via WIFI for convenient documentation.
• Lifetime Free Updates: Offers free lifetime updates without the need for a subscription, ensuring continuous software enhancement.
• Expandable Vehicle Support: Easily adds support for additional vehicles with a nominal fee, increasing its versatility.

Additional Features:

• Clear engine and transmission fault codes and check engine lights
• Read soft codes (codes exist with no check engine light) to assist with preventing issues from arising
• Clear body and general module fault codes
• Clear ABS system fault codes
• Oil change, service due, and CBS reset
• Registers your battery
• Reset airbag light
• Reset TPMS light
• Data logging for future analysis

Note:

• This scan tool covers over 25 years of models, so some years and or models, on some functions may not function but will be reviewed in future updates. 
• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability 
• We recommend purchasing a Bentley Manual to use with your Scan Tool.
• Can only be updated on Microsoft PC's not with Apple.
• You will need to register your scan tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require ES2992111 for use 

Installation of the scanner tool plug into OBD2 port:

Please make sure pins are all straight on the end of the plug and the OBD2 port on the vehicle's side are not damaged or bent. This ensures good contact and power functionality of the scan tool. 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming. Sensors can easily be activated and programmed with the Foxwell T2000 TPMS Service Tool (ES#4674668).

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight

The perfect kit containing most of your needed European essentials. 

Features:

• 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
• 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
• 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
• 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
• 1PC- 1/4" DR.UNIVERSAL JOINT
• 1PC- 1/4" DR.SLIDING T-BAR
• 1PC- 1/4" DR.6" SPINNER HANDLE
• 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
• 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
• 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
• 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
• 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
• 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
• 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

Features:

• Ultra light  jack stands only weigh 4.7 lbs each
• All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
• 6 locking positions for a secure load in multiple heights
• Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
• Min. Height is 10.6
• Max Height is 15.4"
• Large 7" diameter base
• Outer support tube is 2-1/8" in diameter

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

• ½-inch drive 46mm 12-point socket
• Specially hardened to take the added abuse from a impact gun
• Coated for added protection and so you can tell it apart from non impact rated sockets
• 75mm depth  to accommodate many applications and different length shafts
• Made of durable chrome moly steel

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
• Deluxe transverse support for even more stability
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point long reach deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

If you're removing trim panels and don't want to scratch or break any pieces then this is a must have. Formed for precision and constructed from plastic to be gentle with the finish.

Features:

•  Wide type remover
• Pull type remover
•  Handy remover
• Narrow type remover
• Upholstery Clip remover
• Angled Clip Panel Remover
• Fork Tip Flat Clip Panel Remover
• Clip Panel Remover
• Sharp Tip Flat Clip Remover
• Panel Remover
• Blunt Tip Flat Clip Panel Remover