Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit
Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.
Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.
The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.
Kit Contents:
Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:
Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:
Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.
This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.
Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.
Achieve increased throttle response and acceleration with the MFactory range of single-piece Lightweight Flywheels!
Diamond Cut to exacting tolerances from Forged Chromium-Molybdenum Steel
Perfect fitment & finish ensures hassle-free installation
Designed using leading-edge Solidworks 3D CAD & Cosmos FEA software
Advanced Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!
Precision Balanced to over 12000rpm
Ensures the utmost reliability from our Lightweight Flywheels, which are specifically designed to reduce weight and inertia for improved engine response and acceleration
Specifications
Made from imported Japanese SAE 4140 Steel
Forged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness
Proprietary Nitride surface treatment for increased surface hardness
This product was last offered at the strikethrough price on
04-15-2026
This product was last offered at the strikethrough price on
04-15-2026
The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime.
This DCT service kit that takes the guesswork out of a fluid change . No need to track down the correct fluid and plugs, simply open the box, and get the job done the correct way. By servicing your DCT transmission, you will be assured that old, broken down fluid won't cause a several thousand dollar nightmare. We recommend this service every 40,000 miles to keep your transmission going strong for years to come.
Kit includes:
Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.
Both the cartridge and suction filters have their own challenges in replacing. For best results, replace both.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
03-04-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit
Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.
Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.
The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.
Kit Contents:
Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:
Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:
Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.
This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.
Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.
This product was last offered at the strikethrough price on
05-06-2026
A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response.
This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come.
Stock Flywheel Weight: 24-31 lbs.
JB Racing Lightweight Aluminum Flywheel: 12 lbs.
This item fits the following BMW Chassis:
E61/1, E82/88, E9x, Z4
Fits the follow engines:
N52 3.0L
Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.
Included in this kit:
Streamline the setup process for your Limited Slip Differential (LSD) with this mandatory back-lash setting tool. This custom-designed tool is instrumental in reducing installation time by a whopping 50%! It's important to note that this tool is not part of BMW's offerings. Should there be any defects or warranty-related matters, it's advisable to directly reach out to Team M Factory for prompt resolution.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.
This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!
See the included components under Kit Contents below.
This product was last offered at the strikethrough price on
04-22-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.
This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!
See the included components under Kit Contents below.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Corteco mounts are perfect to eliminate these problems and provide long lasting reliability.
Included in this kit:
This product was last offered at the strikethrough price on
05-06-2026
Upgrade your BMW's differential with the Differential Rebuild Kit Plus by Team MFactory. Whether you've recently replaced your differential or upgraded to a Limited-Slip, it's essential to replace the hardware to ensure optimal performance. This comprehensive kit from ECS Tuning includes 10 Differential Ring Gear Bolts, new axle seals, and new differential bearings, providing everything you need for a complete differential rebuild. With high-quality components, you can trust this kit to support your new differential or rebuild your existing unit effectively.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-04-2026
This product was last offered at the strikethrough price on
06-04-2026
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.
Kit Includes:
Fits the following BMWs:
E82/88 BMW 128i - with GA6L45R automatic transmission
E83 BMW X3 N52 3.0L - with GA6L45R automatic transmission
E9X BMW 328i/xi - with GA6L45R automatic transmission
This product was last offered at the strikethrough price on
02-25-2026
BMW E46 E82 E9X Differential Rebuild Kit Plus includes all the essentials to restore your differential to like-new condition. Designed specifically for BMW models, this comprehensive kit provides high-quality components that ensure optimal performance and longevity of your vehicle's differential system.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Gaining a prominent edge over the competition is now within reach, thanks to the MFactory Helical Limited Slip Differential offered by Turner Motorsport. This Helical LSD ensures a seamless and uniform distribution of power to your BMW's wheels, significantly enhancing traction whether you're on the street, strip, or track. It's an absolute necessity for BMW enthusiasts.
Curious about the LSD's role? Without it, your car essentially operates as a one-wheel-drive machine, delivering torque solely to the wheel with less grip. This is where the Helical LSD shines, as it allows both wheels to receive power by limiting the speed difference between them, in contrast to the open differentials found in most vehicles.
Break-In Procedure: For optimal performance, it's recommended to change the fluid after the first 3-400 miles of use.
Please note that any defects or warranty claims should be directed to Team MFactory.
This product was last offered at the strikethrough price on
05-07-2026
Upgrade your BMW's drivetrain with this comprehensive kit that includes a new pumpkin for a hassle-free bolt-in replacement. Plus, enjoy the added benefit of a $500 refundable core charge. For any defects or warranty claims, please directly reach out to Team M Factory.
Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.
This kit is perfect to restore your driving pleasure!
See the included components under Kit Contents below.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.
Kit Includes:
Fits the following BMWs:
E84 BMW X1 xDrive35i
E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
E93 BMW 328i (with GA6HP19Z automatic transmission), 335i
E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
E61 BMW 525i, 530xi, 535xi
E70 BMW X5 xDrive30i
E71 BMW X6 35iX
E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
F01/02 BMW 740i/Li
E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52
This product was last offered at the strikethrough price on
04-17-2026
When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.
Included in this kit:
Fits the following BMWs:
E9X BMW 335i/is N54 N55
Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Corteco mounts are perfect to eliminate these problems and provide long lasting reliability.
Included in this kit:
Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.
This kit is perfect to restore your driving pleasure!
See the included components under Kit Contents below.
The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.
What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).
An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.
Features:
Industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**
Includes $500 core charge to be refunded when we receive your rebuildable core.
The best way to gain a prominent advantage over the competition is to do it with the MFactory Helical Limited Slip Differential. The smooth consistent distribution of power to the wheels with the MFactory Helical LSD puts the power-to-the-ground and maximizes your vehicle's traction. A must for any car be it street, strip, or track.
What exactly does an LSD do you ask? Without an LSD your car is actually 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have).
An LSD only lets the wheels spin at different speeds by a limited amount (typically this is a percentage difference) which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.
Features:
An industry first, 30-day Feel the Torque™ money back guarantee and a Limited-Lifetime Warranty!
Forged and Cryo-tempered
Advanced Shot Peening technology for increased surface hardness
Designed to withstand the extreme shock loads of competition-level drag racing
Maintenance-free gears eliminate the need for special fluid or rebuilds associated with typical plate LSDs.
Lock-free operation ensures no adverse steering response.
**As a break-in procedure, we recommend changing the fluid after the first 3-400 miles of use.**
Includes $500 core charge to be refunded when we receive your rebuildable core.
This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.
This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.
E9X Diff Mount Set includes: