BMW Engine Parts for BMW 3 Series E93 (2007-2013)

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships on Nov 2, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

For Vehicles Equipped with a ZF GA6HP19Z Automatic Transmission.

10X Entries Into Our F80 M3 Sweepstakes

T#:640488

Part#: 24117571217

In Stock

Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Pure Turbos PURE600 Turbo Upgrade - BMW E9X 335 N54 3.0L

These will not work with OEM stock inlets - Aftermarket 2" inlet kit is required

T#:594820

Part#: PURE-N54-0014

In Stock

$ 1,995.00 USD

Add to Wish List

Qty

$ 1,995.00 USD

Add to Wish List

With a set of upgraded turbos and some supporting modifications, your N54 engine can produce 550+ wheel horsepower! These PURE600 turbos from Pure Turbos feature aftermarket (OEM design) housings as well, eliminating the need to send in your stock turbos for a core charge.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957903

Part#: N55PURE500PWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

These PURE500 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

IRP Crank Bolt Capture - BMW N55/S55

T#:5309585

Part#: IRPCBC-55

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Prevent your crank bolt from spinning with IRP's N55/S55 engine bolt fixture. As the spinning of the crank bolt has been a known issue for both the N55 and S55 motors, this is a must have to ensure that your engine stays in working condition! Features: Composed of lightweight billet aluminum Includes crank bolt capture and 8 fasteners

Show More Show Less

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

10X Entries Into Our F80 M3 Sweepstakes
For RWD models only!

T#:2393341

Part#: 11137570400

In Stock

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

When your oil pan has suffered damage due to road debris or the vehicle making contact with the road surface, immediate replacement is crucial. This preventative action ensures that any potential cracks or leaks, which could ultimately result in catastrophic engine failure, are averted. Don't wait – safeguard your engine's integrity with a prompt oil pan replacement.

Show More Show Less

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ PWG

T#:38385325

Part#: BMW-N55-PURE-600

Ships in 7 Business Days

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with pneumatic waste gate (PWG)

T#:578272

Part#: PURE-N55-0001KT

Ships in 4 Business Days

$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD

Add to Wish List

Qty

$ 2,800.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade - E9X 335i/is/xi N54 ...

For use with 2.0" inlet pipes only - Not compatible with stock inlets

T#:578242

Part#: PURE-N54-0004KT

In Stock

$ 4,042.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,029.00 USD

Add to Wish List

Qty

$ 4,029.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For the enthusiast hunting for big power out of their N54, Pure Turbos has the answer with their Stage 2 "Hi-Flow" turbocharger upgrade. With supporting modifications, 600-700 reliable wheel horsepower is achievable - enough to be wild on the street and highly competitive on the track or strip.

Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957911

Part#: N55PURE750PWG

Ships in 4 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

Pure Turbos N54 Stage 2 "Daily-Driver" Turbo Upgrade - E9X 335i/is/xi...

For use with 2.0" inlet pipes only - Not compatible with stock inlets

T#:578239

Part#: PURE-N54-0003KT

Ships in 4 Business Days

$ 3,524.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,511.00 USD

Add to Wish List

Qty

$ 3,511.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For the enthusiast hunting for big street and strip power out of their N54, Pure Turbos has the answer with their Stage 2 "Daily-Driver" turbocharger upgrade. Similar to Pure's Stage 2 "Hi-Flow" turbos, but a little tamer: ideal for a daily driver. With supporting modifications, 450-600 reliable wheel horsepower is achievable - enough to be wild enough for any weekday commute.

Show More Show Less

Pure Turbos N54 Stage 1 Turbo Upgrade - Stock Inlet - E9X 335i/is/xi ...

For use with stock inlet pipes (1.81")

T#:578258

Part#: PURE-N54-0009KT

Ships in 4 Business Days

$ 2,336.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,250.00 USD

Add to Wish List

Qty

$ 2,250.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. If the stock power of your BMW's N54 isn't quite enough for you but you also don't want to go too crazy, this Stage 1 turbo upgrade from Pure Turbos is the best option on the market! With just a few supporting modifications you can easily achieve 450+ reliable wheel horsepower, enough for a bit of fun but not too much to make things unwieldy. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available: the stock size of 1.81" (this kit) or with 2.0" oversized inlets (T#578261) for use with oversized pipes.

Show More Show Less

Schrick - N52 Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

T#:2423579

Part#: IRPEM-9XAL

Special Order: No Guaranteed ETA

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

T#:2474

Part#: TMS2474

Ships on Jan 29, 2027

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

T#:2500

Part#: TMS2500

Ships on Jan 29, 2027

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Pure Turbos N54 Pure Stage 1 Turbo Upgrade - 2.0" Inlet - E9X 335i/is...

For use with 2.0" inlet pipes.

T#:578261

Part#: PURE-N54-0010KT

Ships in 4 Business Days

$ 2,336.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,250.00 USD

Add to Wish List

Qty

$ 2,250.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. If the stock power of your BMW's N54 isn't quite enough for you but you also don't want to go too crazy, this Stage 1 turbo upgrade from Pure Turbos is the best option on the market! With just a few supporting modifications, you can easily achieve 450+ reliable wheel horsepower, enough for a bit of fun but not too much to make things unwieldy. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available: the stock size of 1.81" (T#578258) or this package with 2.0" oversized inlets for use with oversized pipes.

Show More Show Less

E9X 335i/xi N54 Stage 1+ Turner Power Package

10X Entries Into Our F80 M3 Sweepstakes

T#:224335

Part#: TMS224335

Ships in 2 Business Days

$ 1,684.00 USD

Add to Wish List

Qty

$ 1,684.00 USD

Add to Wish List

2007-2010 E90/E92/E93 335i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer

More power = more heat. It's easy to make more power one time but to continue making that power consistently requires careful planning and design. With the additional boost the air entering the engine is also warmer, making the intercooler more important than ever. In testing, the stock BMW intercooler was quickly overwhelmed and cannot keep the intake air cool enough. The engine computer recognizes that and dials back the boost. A more efficient intercooler will keep boost levels up, delivering consistently higher boost levels. The Stage 1+ package includes a Wagner Evo I plug and play intercooler upgrade. We get great feedback from our customers and technicians about the Wagner FMIC - it's a direct bolt in part using all of the factory piping and it offers 85% more surface area than the factory intercooler.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade w/ Installation Kit -...

With upgraded, 2.0" inlet snout to alleviate inlets popping off. For use with 2.0" inlet pipes.

T#:20749230

Part#: PUREN540004INSKT

Ships in 4 Business Days

$ 4,291.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,278.00 USD

Add to Wish List

Qty

$ 4,278.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Sometimes, you just have to send it! Pure Turbos have that exact idea for their Stage 2 "Hi-Flow" turbo upgrade. Designed to make your N54 powered BMW a monster on the street or track, this kit is designed to provide you with up to 700 reliable horsepower with supporting modifications. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available, the stock size of 1.81" (T#578217) or this package with 2.0" oversized inlets for use with oversized pipes. Features of this Pure Turbos upgraded OEM turbocharger: Upgraded billet compressor wheel Upgraded Hi-Flow turbine wheel Bullet-nosed nuts Upgraded wastegates Machined inlet snouts (no more inlet hoses popping off) VSR balanced to better than OE tolerances Featuring a limited 1 year warranty. Price includes a $600 core charge to be refunded once we receive your rebuildable cores.

Show More Show Less

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Jan 29, 2027

$ 3,415.99 USD

Add to Wish List

Qty

$ 3,415.99 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

E9X M3 Performance Underdrive Pulley Kit

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

Pure Turbos PURE600 Turbo Upgrade - BMW E9X 335 N54 3.0L

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

IRP Crank Bolt Capture - BMW N55/S55

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ PWG

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade - E9X 335i/is/xi N54 ...

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

Pure Turbos N54 Stage 2 "Daily-Driver" Turbo Upgrade - E9X 335i/is/xi...

Pure Turbos N54 Stage 1 Turbo Upgrade - Stock Inlet - E9X 335i/is/xi ...

Schrick - N52 Performance Camshaft Set - 238/272

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

Pure Turbos N54 Pure Stage 1 Turbo Upgrade - 2.0" Inlet - E9X 335i/is...

E9X 335i/xi N54 Stage 1+ Turner Power Package

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade w/ Installation Kit -...

N54 Schrick Camshaft Set 268/265

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results