BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

BMW N55 NGK Performance Iridium Spark Plug Set
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:568296
Part#: 97506KT
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping
NOTE: For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder. When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less
Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets
Aluminum Valve Cover - BMW N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:14915981
Part#: 11127570292M
In Stock
Sale - Save 20% $ 359.99

This product was last offered at the strikethrough price on
10-01-2026

$ 287.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 359.99

This product was last offered at the strikethrough price on
10-01-2026

$ 287.99 USD
Free Shipping on orders $49 and up
Tired of dealing with plastic valve covers that crank and split, causing frustrating oil leaks? This upgraded aluminum valve cover is the perfect solution! Without oil cap!
Show More Show Less

Oil Filter Housing Gasket KIT
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:637846
Part#: 1142753729312KT1
In Stock
$ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less

NGK - Corporate Logo
T#:568293
Part#: 97506
In Stock
$ 113.88 USD
Free Shipping
$ 113.88 USD
Free Shipping
When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less
Valve Cover - Aluminum - N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:14915993
Part#: 11127552281M
In Stock
Sale - Save 20% $ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 348.42 USD
Free Shipping
Sale - Save 20%
$ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 348.42 USD
Free Shipping

Upgrade your BMW's engine bay with the Aluminum Valve Cover 11127552281M to eliminate leaks and add a touch of style. This high-quality valve cover ensures a secure seal, preventing leaks and enhancing the aesthetic appeal of your BMW.

  • Aluminum Valve Cover for BMW
  • Eliminates leaks for improved engine performance
  • Adds style to the engine bay
  • High-quality construction for durability and reliability
Show More Show Less

BMW N54 3.0L Valve Cover - Aluminum
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:14915983
Part#: 11127565284M
In Stock
Sale - Save 20% $ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 349.99 USD
Free Shipping
Sale - Save 20%
$ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 349.99 USD
Free Shipping
This aluminum valve cover from Bremmen is designed to eliminate issues stemming from brittle plastic valve covers. Cracked or warped valve covers can cause oil leaks, engine fault codes, vacuum leaks, and misfires.
Show More Show Less

Oil Filter Housing Gasket Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5403248
Part#: 11427537293TMSKT
In Stock
$ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less
Lemforder - Corporate Logo
T#:378218
Part#: 11812283798
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
OEM Lemförder motor mounts are the perfect replacement to prevent vibrations and knocks from continuing.
NRW Design - Corporate Logo
T#:42436691
Part#: S65VCGKT
Ships in 1-2 days
$ 396.00 USD
Free Shipping on orders $49 and up
Whether you're maintaining your S65 engine or upgrading to billet covers, the NRW Designs S65 Valve Cover Gasket Kit ensures maximum reliability and performance


NGK - Corporate Logo
T#:376669
Part#: N54PLUGKT
In Stock
$ 125.99

This product was last offered at the strikethrough price on
09-09-2026

$ 111.00 USD
Free Shipping
$ 111.00 USD
Free Shipping
When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!
Show More Show Less
VANOS Solenoid Valve Kit - N52 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:1331979
Part#: 601-0176
In Stock
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less

OEM NGK Spark Plug Set - LKR8AP - E9X M3 S65
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:348135
Part#: 12120032273KT
In Stock
$ 161.99

This product was last offered at the strikethrough price on
09-14-2026

$ 135.99 USD
Free Shipping
$ 135.99 USD
Free Shipping
BMW recommends a spark plug change interval of 37,000 miles for the S65 engine. Replace the spark plugs on your E9X M3 with these OEM NGK spark plugs that are a direct replacement for the factory part # 12120032273.
Show More Show Less

NRW Design - Corporate Logo
T#:42436697
Part#: S65VCG12
Ships in 3 Business Days
$ 114.99

This product was last offered at the strikethrough price on
07-31-2026

$ 99.99 USD
Free Shipping on orders $49 and up
$ 99.99 USD
Free Shipping on orders $49 and up
A smart upgrade that enhances engine reliability and longevity by sealing off the valve cover and mitigating oil leaks.
Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

High-Performance Ignition Service Kit - BMW N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 195.55 USD
Free Shipping
Sale - Save 20%
$ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 195.55 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Packaged by Turner - Corporate Logo
T#:13463763
Part#: 11247838088DBEKT
Ships on Nov 2, 2026
$ 981.99 USD
Free Shipping on orders $49 and up
BE Bearings, in collaboration with Clevite, a leading OE bearing manufacturer, has revolutionized rod bearings for your peace of mind. Our redesigned bearings offer enhanced clearance and feature a shift from the original tin-aluminum composition to lead-copper. This upgrade incorporates the cutting-edge Clevite Tri-Metal design and boasts a Tri-Armor™ coating, ensuring superior lubrication for wear prevention. Moreover, these softer bearings are gentler on your engine and more tolerant of foreign particles suspended in your oil. Additionally, this upgrade enables precise wear assessment through oil testing. Our comprehensive kit includes: Upper and lower BE Bearings upgraded rod bearings Essential hardware Oil filter Oil pan gasket RedLine assembly lube Secure your BMW E9X M3's engine with our rod bearing kit and enjoy peace of mind on the road.
Show More Show Less

Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
$ 83.40 USD
Free Shipping
$ 83.40 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)
Universal Product - Please confirm your fuel line size prior to ordering
Precision Raceworks - Corporate Logo
T#:37757295
Part#: 601-0240
Ships in 3 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less
NRW Design - Corporate Logo
T#:29101660
Part#: S65BILLETSPTBS
Ships in 1 Business Day
$ 199.99 USD
Free Shipping on orders $49 and up
Crafted from 6061 billet aluminum, these spark plug tubes are the first of their kind. They boast a serviceable design and a 30% increase in contact surface compared to OEM spark plug tubes, ensuring superior performance and durability. Designed to last a lifetime, these billet spark plug tubes are resistant to leaks, tears, and deterioration.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403237
Part#: 11247838088TMSKT
Ships on Nov 2, 2026
$ 1,118.99

This product was last offered at the strikethrough price on
09-01-2026

$ 1,117.99 USD
Free Shipping
$ 1,117.99 USD
Free Shipping
Includes BE Bearings Rod Bearings, BE Bearings Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 oil, Genuine BMW Hardware and Liqui Moly LM 48 Assembly Lube - 50g


NRW Design - Corporate Logo
T#:26504975
Part#: S65VCG
Back Ordered
$ 95.00 USD
Free Shipping on orders $49 and up

From the factory, BMW S65 valve cover bolts feature integrated non-serviceable grommets. These rubber seals tend to weaken, becoming brittle after years of heat and oil exposure. Replacing these bolts and integrated grommets can total over $280

To address this issue, NRW has developed a solution: a silicone replica of the factory rubber grommet, boasting a superior heat resistance of 170 degrees Celsius compared to the original's 120 degrees Celsius. Each kit contains 26 grommets, enough to service both valve covers.

Show More Show Less
Precision Raceworks - Corporate Logo
T#:1165728
Part#: 601-0177
In Stock
$ 494.99 USD
Free Shipping
$ 494.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Bremmen Crankcase Vent Hose - E60 E70 E82/88 E9X N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:640155
Part#: 11157559528
In Stock
Sale - Save 20% $ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 48.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.16 USD
Free Shipping on orders $49 and up
This valve cover vent hose helps to vent the crankcase fumes on BMW's with the N51 / N52 6 cylinder engines. If replacing the valve cover, we recommend purchasing this item as well as it often will break while removing it from the valve cover.
Show More Show Less

N54 Valve Cover Upgrade Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25772568
Part#: 11127565284MTKT
In Stock
Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.
Show More Show Less

Boost Solenoid/Pressure Converter - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:33646291
Part#: 11747626350
In Stock
Sale - Save 9% $ 74.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 74.99

This product was last offered at the strikethrough price on
05-03-2026

$ 68.39 USD
Free Shipping on orders $49 and up
Precision Raceworks - Corporate Logo
T#:4333508
Part#: 201-0091
Back Ordered
$ 39.99 USD
Free Shipping on orders $49 and up
Replaces individual coils found in the Precision Raceworks Ignition Kit.

Camshaft Position Sensor - Priced Each
Two required per engine, may be replaced separately as needed.
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:27105154
Part#: 13627525014
In Stock
Sale - Save 17% $ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD
Free Shipping on orders $49 and up
Sale - Save 17%
$ 41.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.84 USD
Free Shipping on orders $49 and up
Spark Plugs - Set Of Six (ILZFR6D11) - N52 3.0L
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:370526
Part#: ILZFR6D11KT6
Ships in 1 day
$ 130.99

This product was last offered at the strikethrough price on
05-07-2026

$ 77.99 USD
Free Shipping
$ 77.99 USD
Free Shipping

Revitalize your BMW's performance by addressing poor idle, fuel inefficiency, and engine misfire issues caused by worn-out spark plugs. NGK offers the ultimate solution with their high-quality aftermarket spark plugs. Over time, electrode wear leads to increased gaps and weakened sparks, while carbon buildup can impair performance. These upgraded plugs are designed to restore power, fuel efficiency, and smooth out an irregular idle, ensuring optimal engine functionality.

  • Solves poor idle, low fuel efficiency, and engine misfire problems
  • Enhances engine power and fuel efficiency
  • Addresses electrode wear and carbon buildup issues
  • Ensures quality NGK replacement for improved performance
Show More Show Less

OEM Accessory Belt Service Kit - N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
Ships in 1 Business Day
Sale - Save 5% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Sale - Save 5%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

NRW Design - Corporate Logo
T#:42403028
Part#: S65VANOS
Ships in 3 Business Days
$ 331.99

This product was last offered at the strikethrough price on
08-07-2026

$ 289.99 USD
Free Shipping on orders $49 and up
$ 289.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW S65’s reliability and performance with these precision-engineered Billet Chromoly Vanos Covers your engine deserves.
Aluminum Valve Cover Set - Gloss Red - E9X M3 S65 4.0L
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:40985128
Part#: 1112784815XREDKT
In Stock
Sale - Save 18% $ 1,040.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 1,040.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.58 USD
Free Shipping on orders $49 and up

The factory magnesium valve covers on the S65 engine are known for developing micro-porosity, corrosion, and persistent oil leaks over time. This material is highly susceptible to oxidation, leading to unsightly surface imperfections, weakened gasket channels, and sealing issues that a simple gasket replacement won't fix.

Upgrade to this high-strength aluminum valve cover set, engineered as a direct-fit replacement for your aging OEM covers. Unlike magnesium, aircraft-grade aluminum offers superior durability, enhanced heat resistance, and complete immunity to the corrosion issues that plague factory covers. Whether you're refreshing a high-mileage M3 or seeking long-term reliability, this upgrade ensures a leak-free, worry-free solution for your S65.

This valve cover set includes gaskets, bolts, and oil separators for a comprehensive replacement.

Features:

Eliminates the common porosity and corrosion issues found in factory magnesium covers.

Helps maintain optimal engine temperatures and enhances long-term reliability.

Gloss red finish provides a much-needed boost in engine bay aesthetic.

Designed for an OEM-like installation without modifications.

Reduces the risk of oil leaks, ensuring a proper seal.

Resistant to oxidation and chemical exposure for a long-lasting clean look.

Show More Show Less
Blow-By Vent Hose
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:30629687
Part#: 11157553949
In Stock
Sale - Save 20% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.08 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 35.08 USD
Free Shipping on orders $49 and up


N52 Valvetronic Camshaft Adjuster Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416764
Part#: 11377548388TMSKT
In Stock
Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Sale - Save 19%
$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD
Free Shipping
Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.
OEM Accessory Belt Service Kit - E82/88 E9X N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:567679
Part#: 11287582946KT4
Ships in 1 day
$ 213.63 USD
Free Shipping
$ 213.63 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
Oil Level Indicator - 12617607910
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:36913378
Part#: 12617607910
In Stock
Sale - Save 15% $ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 153.99

This product was last offered at the strikethrough price on
05-03-2026

$ 130.89 USD
Free Shipping on orders $49 and up
The engine oil level sensor tracks the oil level in the engine's oil pan, sending real-time data to the ECU (Engine Control Unit). This vital information ensures the engine has the right amount of oil for proper lubrication. Commonly featured in modern vehicles, the oil level sensor acts as an essential safeguard against low oil levels, helping prevent potential engine damage.
Show More Show Less

OEM Accessory Belt Service Kit - N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:593693
Part#: N52ABKT
In Stock
Sale - Save 22% $ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD
Free Shipping
Sale - Save 22%
$ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:22163422
Part#: 11287568247TKT
Ships on Nov 12, 2026
Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 209.99

This product was last offered at the strikethrough price on
04-15-2026

$ 178.94 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161701
Part#: 101-0257
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

  • 6-micron filtration – Removes fine particles and contaminants to protect engine components
  • High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
  • Optimized fuel flow – Maintains consistent fuel delivery for peak performance
  • Durable construction – Engineered for long-lasting reliability in high-demand applications
  • Easy replacement – Simple installation for routine maintenance
  • Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as needed
  • Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

BMW E6X / E8X / E9X - N52 Replacement Starter Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777314
Part#: SR0492NKT2-KT
In Stock
Sale - Save 4% $ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Is your car having trouble starting? Does your starter click when you turn the key? Sounds like it's time for a new starter motor! Includes new starter with no core charge, intake gaskets, throttle body gasket and hardware.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094311
Part#: 201-0188
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

  • Seamless fit – Compatible with most aftermarket top mount port injection manifolds
  • Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
  • Leak-proof design – Dual-seal quick connectors for maximum fuel safety
  • High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
  • Easy installation – Direct plug-and-play with factory and aftermarket fuel lines
Show More Show Less

Boost Solenoid/Pressure Converter - Kit - N54, N63
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416756
Part#: 11747626350TMSKT
In Stock
Sale - Save 45% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD
Free Shipping
Sale - Save 45%
$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 226.02 USD
Free Shipping
Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install

NRW Design - Corporate Logo
T#:42403026
Part#: S65VANOSWB
Ships in 3 Business Days
$ 389.99 USD
Free Shipping on orders $49 and up
For BMW owners seeking ultimate Vanos system reliability and performance, NRW Design 4130 Chromoly Vanos Covers (With Bolts) from Turner Motorsport provide a proven and durable solution built to endure the demands of high-performance driving.
Show More Show Less
Bremmen Parts Chain Tensioner - With Gasket Ring
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:556062
Part#: 11317584723
In Stock
Sale - Save 15% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Sale - Save 15%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Addresses chain slap or other noise caused by a failed or failing tensioner
Check Valve - 11367541692
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:37655979
Part#: 11367541692
In Stock
Sale - Save 11% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.37 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.37 USD
Free Shipping on orders $49 and up
A damaged, leaking, or missing vacuum check valve can lead to engine performance problems, trigger the check engine light, and potentially cause your vehicle to fail an emissions test.


Bremmen Parts - Corporate Logo
T#:640545
Part#: 16147163298
In Stock
Sale - Save 10% $ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sale - Save 10%
$ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sputtering, no starts, or rough idle could be an indication of a failing or failed fuel pump. Also, if your gas gauge is not reading correctly, or not at all, it's probably the level sensor on this pump. Unfortunately, the level sensor is part of the pump assembly and must be replaced as a whole. This replacement Bremmen fuel pump is the perfect option to get your BMW back on the road without draining your wallet.
Show More Show Less
Lower Idler Pulley
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:32350850
Part#: 11287557851
In Stock
Sale - Save 15% $ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.79 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 27.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.79 USD
Free Shipping on orders $49 and up