BMW Engine Parts for BMW 3 Series E93 (2007-2013)

NRW Designs S65 Valve Cover Gasket Kit

T#:42436691

Part#: S65VCGKT

Ships in 1 Business Day

$ 396.00 USD

Add to Wish List

Qty

$ 396.00 USD

Add to Wish List

Whether you're maintaining your S65 engine or upgrading to billet covers, the NRW Designs S65 Valve Cover Gasket Kit ensures maximum reliability and performance

NRW Designs - Upgraded S65 Viton Valve Cover Gasket Set - E90, E92 M3...

T#:42436697

Part#: S65VCG12

Ships in 1-2 days

$ 114.99

This product was last offered at the strikethrough price on
07-31-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A smart upgrade that enhances engine reliability and longevity by sealing off the valve cover and mitigating oil leaks.

034Motorsport Density Line Solid Rubber Motor Mount Set - E36 E46 non...

2X Entries Into Our F80 M3 Sweepstakes

T#:568474

Part#: 034-509-0064KT

In Stock

$ 210.00 USD

Add to Wish List

Qty

$ 210.00 USD

Add to Wish List

Collapsing and worn engine mounts can mean big trouble for BMWs. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased with these solid rubber versions. Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted engine motion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better engine response.

Show More Show Less

Crank Bolt Capture Plate - BMW N55, S55

2X Entries Into Our F80 M3 Sweepstakes

T#:48815416

Part#: 034-113-Z016

In Stock

$ 78.00 USD

Add to Wish List

Qty

$ 78.00 USD

Add to Wish List

Ease your mind and the strain on your N55 or S55's crank bolt by replacing it with this improved capture plate.

NRW Design Billet Spark Plug Tubes - S65 E9X M3

T#:29101660

Part#: S65BILLETSPTBS

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Crafted from 6061 billet aluminum, these spark plug tubes are the first of their kind. They boast a serviceable design and a 30% increase in contact surface compared to OEM spark plug tubes, ensuring superior performance and durability. Designed to last a lifetime, these billet spark plug tubes are resistant to leaks, tears, and deterioration.

Show More Show Less

NRW Designs Silicone Valve Cover Grommet Kit - S65 E9x M3

T#:26504975

Part#: S65VCG

Back Ordered

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

From the factory, BMW S65 valve cover bolts feature integrated non-serviceable grommets. These rubber seals tend to weaken, becoming brittle after years of heat and oil exposure. Replacing these bolts and integrated grommets can total over $280

To address this issue, NRW has developed a solution: a silicone replica of the factory rubber grommet, boasting a superior heat resistance of 170 degrees Celsius compared to the original's 120 degrees Celsius. Each kit contains 26 grommets, enough to service both valve covers.

Show More Show Less

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships in 4 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

NRW Design 4130 Chromoly Vanos Covers - S65

T#:42403028

Part#: S65VANOS

Ships in 3 Business Days

$ 331.99

This product was last offered at the strikethrough price on
08-07-2026

$ 289.99 USD

Add to Wish List

Qty

$ 289.99 USD

Add to Wish List

Upgrade your BMW S65’s reliability and performance with these precision-engineered Billet Chromoly Vanos Covers your engine deserves.

Density Line Solid Rubber Engine And Trans Mount Set - E82/E9X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389756

Part#: 034-509-N5X

In Stock

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted engine and transmission motion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better shifts.

Sold as a set of matching engine and transmission mounts.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

NRW Design 4130 Chromoly Vanos Covers(With Bolts)

T#:42403026

Part#: S65VANOSWB

Ships in 1-2 days

$ 389.99 USD

Add to Wish List

Qty

$ 389.99 USD

Add to Wish List

For BMW owners seeking ultimate Vanos system reliability and performance, NRW Design 4130 Chromoly Vanos Covers (With Bolts) from Turner Motorsport provide a proven and durable solution built to endure the demands of high-performance driving.

Show More Show Less

NRW Designs S65 Aluminum Valve Cover - Wrinkle Black

T#:20584676

Part#: S65VCWBLK

Ships in 3 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

Upgrade your BMW S65 engine to deliver high-quality, performance-driven ascetics that meet the demands of both daily drivers and motorsport enthusiasts.

034Motorsport Density Line Solid Rubber Motor Mount Set - E8X/E9X ...

2X Entries Into Our F80 M3 Sweepstakes
[Z4] - For Roadster Models Only

T#:388772

Part#: 034-509-005X

In Stock

$ 264.00 USD

Add to Wish List

Qty

$ 264.00 USD

Add to Wish List

Collapsing and worn engine mounts can mean big trouble for N52/N54/N55 cars. The stock mounts are filled with fluid that can leak or evaporate over time. That leaves the mount unstable and too flexible to properly support the engine. The side effects of a worn engine mount are: shaking and vibrating engine, driveline twist from engine torque that can break or snap bushings, and broken motor mount arms and bolts. If you're tired of replacing engine mounts you'll be very pleased wtih these solid rubber versions.

Not only are these more reliable than stock fluid-filled mounts, they are slightly stiffer than new stock mounts thanks to a solid rubber construction (no voids in the rubber) but designed for street use so they remain quiet and comfortable. The solid rubber has less deflection than a stock mount, so no wasted enginemotion. Less wasted motion gives you more torque to the wheels (it's not spent twisting the engine) and better engine response.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2009-2016 E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

NRW Designs S65 Aluminum Valve Cover - OE Gray

T#:20584675

Part#: S65VCOEG

In Stock

$ 1,371.99

This product was last offered at the strikethrough price on
06-05-2026

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

Upgrade your BMW S65’s performance and reliability with the NRW Designs S65 Aluminum Valve Cover - OE Gray, and count on Turner Motorsport for top-tier components trusted by professionals and enthusiasts alike.

Show More Show Less

034Motorsport Billet Crank Seal Belt Guard - N52/N54/N55/S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:30894245

Part#: 034-1ZZ-1011

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

The BMW N52, N54, N55, & S55 engines are notorious for random serpentine belt failures. Once this belt fails on your engine, there is a strong possibility for it to wrap around your crank shaft past your OEM crank seal, and into your engine internals. Once the belt is inside your engine, it is commonly shredded, causing bits and pieces to clog up the oil pickup and potentially lead to catastrophic engine failure. The 034Motorsport Billet Crank Seal Guard is designed to be installed over the OEM BMW crank seal to prevent a failed serpentine belt from entering your engine. The 034Motorsport Crank Seal Guard is manufactured from 6061-T6 billet aluminum and anodized black to protect it from any corrosion. FEATURES: Prevent the Dreaded and Costly Premature Serpentine Belt Failure From Ending Up in Your Oil Pan, Leading to Oil Starvation and Engine Failure Machined from 6061-T6 Aluminum Anodized Black for Protection from Corrosion & Long Lasting Great Looks WHAT’S INCLUDED: 1x) 034Motorsport Billet Crank Seal Belt Guard 2x) M8x1.25x40mm - 12.9, Zinc Plated Screws

Show More Show Less

NRW Designs The Ultimate BMW Billet Oil Cap - S55, S65, S85

T#:42436711

Part#: UBBOC

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

The reliable and stylish choice for performance-minded owners. Upgrade your BMW’s form and function with NRW Designs The Ultimate BMW Billet Oil Cap

NRW Desings S65 Aluminum Valve Covers - Wrinkle Red

T#:42403031

Part#: S65VCWRD

Ships in 3 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

With the NRW Designs S65 Aluminum Valve Covers finished in Wrinkle Red, BMW owners can enhance the reliability, style, and longevity of their S65 engine.

NRW Designs S65 Aluminum Valve Cover - Smooth Red

T#:20584680

Part#: S65VCSRD

Ships in 3 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

For enthusiasts seeking a combination of bold looks and long-term reliability, the NRW Designs S65 Aluminum Valve Cover - Smooth Red from Turner Motorsport delivers premium performance and style.

Show More Show Less

NRW Designs S65 Aluminum Valve Cover - Smooth Yellow

T#:20584683

Part#: S65VCSY

In Stock

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

For BMW M3 owners seeking a bold, durable, and functional engine bay upgrade, the NRW Designs S65 Aluminum Valve Cover - Smooth Yellow from Turner Motorsport offers the ideal combination of form and function.

Show More Show Less

Fuel-It! Port Injection Kit With Intake Manifold, 950cc Injectors & F...

T#:26038558

Part#: BMW-N54-PRM-950

Ships on Oct 27, 2026

$ 1,088.00 USD

Add to Wish List

Qty

$ 1,088.00 USD

Add to Wish List

NRW Designs S65 Catchcan Kit Project With ESS Supercharged Hoses ...

T#:42436689

Part#: S65CCSK-2

In Stock

$ 555.00 USD

Add to Wish List

Qty

$ 555.00 USD

Add to Wish List

The ultimate choice for enthusiasts looking to protect their investment, extend engine life, and maintain top-tier performance

NRW Designs S65 Aluminum Valve Cover - Smooth Black

T#:20584681

Part#: S65VCSBLK

Ships on Oct 12, 2026

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

For S65 reliability and a refined engine bay appearance, the NRW Designs S65 Aluminum Valve Cover finished in Smooth Black is a smart investment.

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

NRW Designs S65 Aluminum Valve Cover - Wrinkle Blue

T#:20584678

Part#: S65VCWBLU

Ships in 3 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

Enhance both the visual appeal and reliability of your S65 engine with the NRW Designs S65 Aluminum Valve Cover - Wrinkle Blue, proudly offered by Turner Motorsport.

NRW Designs S65 Catch Can Kit Project With N/A Hoses

T#:42436688

Part#: S65CCSK-1

In Stock

$ 535.00 USD

Add to Wish List

Qty

$ 535.00 USD

Add to Wish List

An essential upgrade for any enthusiast seeking to extend the life and preserve the performance of their BMW M3

NRW Designs S65 Aluminum Valve Cover - Smooth Blue

T#:20584682

Part#: S65VCSBLU

Ships in 3 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

For BMW owners looking to combine high-performance reliability with standout styling, the NRW Designs S65 Aluminum Valve Cover - Smooth Blue from Turner Motorsport delivers on every front.

NRW Designs E9X M3 S65 Inline Fuel Filter Kit - Gasoline Spec Aeromot...

T#:40951290

Part#: S65PFF

Ships in 3 Business Days

$ 310.00 USD

Add to Wish List

Qty

$ 310.00 USD

Add to Wish List

Perfect for preventative maintenance or performance upgrades, the E9X M3 S65 Inline Fuel Filter Kit - Gas Paper Filter is a smart addition to any BMW M3 owner's toolkit.

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

T#:403509

Part#: BMW-S1LPFP-CK

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Density Line Motor Mount - Left - N52/N54/N55

2X Entries Into Our F80 M3 Sweepstakes

T#:388771

Part#: 034-509-0054-SD

In Stock

$ 132.00 USD

Add to Wish List

Qty

$ 132.00 USD

Add to Wish List

Engine mounts made of dense material for BMWs that have N54 and N55 engines. 034Motorsport's Density Line Mounts raise the bar for both comfort and performance. We have improved our mounts to enhance their performance. They are made from durable rubber that lasts a long time and performs well while still being comfortable to use. Density Line Mounts are made to have no gaps or fluids which eliminates the looseness that you often find in factory mounts. This change results in improved gear shifting and better overall driving performance.

Show More Show Less

NRW Designs E9X M3 S65 Inline Fuel Filter Kit (E85 Micro Glass Filter...

T#:42403021

Part#: S65EFF

Ships in 3 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

The go-to choice for BMW enthusiasts looking to enhance fuel system reliability and performance while supporting ethanol-based fuels.

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

T#:403280

Part#: FILPFPK4

Ships in 2 Business Days

Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

Sale - Save 3%

$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.

The Stage 2 bucketless kit includes the following:

- A custom anodized billet fitting for the pump output and stock fuel line connection.
- Our custom billet aluminum anodized bracket for the pump and float assembly
- Two cotter pins to secure your float assembly
- A new E85 compatible Walbro 450 pump
- Spare vent tube clip
- A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

- A complete plug and play solution by simply adding the secondary module
- Our custom billet aluminum fitting to run both pumps in parallel
- A new E85 compatible Walbro 450 pump
- Wiring harness for the secondary pump
- Spare vent tube clip
- A new Walbro filter

Recommended accessories:
- Lock Ring Removal Tool
- Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

T#:403249

Part#: FILPFPK1

Ships in 1 Business Day

Starting at $ 199.99 USD

Add to Wish List

Starting at $ 199.99 USD

Add to Wish List

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP). They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

SAE J30R10 E85 compatible fuel line
14ga fuel resistant wiring harness
Quick connect female bullet connectors (2)
Vent tube replacement clip
Nylon cable ties (10)
Stainless steel lock nuts (2)
10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
Pushlock pump retention fittings (2)
14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)
*Note: Walbro does not warranty this pump for E85 use. If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.
** IMPORTANT: Do NOT attempt to run this kit inline with a Stage 2 kit. The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,155.83 USD

Add to Wish List

Starting at $ 1,155.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

NRW Designs S65 Catchan Kit Project - Standard

T#:42436687

Part#: S65CCSK

Ships in 3 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

BMW enthusiasts can enhance their engine's efficiency and longevity while maintaining factory-like fitment—all supported by the trusted performance experts at Turner Motorsport

Active Autowerke Supercharger Kit - E9X M3 2008-2013

T#:340094

Part#: AASC-E9XM3

Back Ordered

Starting at $ 9,995.00 USD

Add to Wish List

Starting at $ 9,995.00 USD

Add to Wish List

The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.

Show More Show Less

S65 Aluminum Valve Cover - Multiple Finishes

T#:20584686

Part#: S65VC

In Stock

$ 1,371.99

This product was last offered at the strikethrough price on
06-05-2026

Starting at $ 1,199.99 USD

Add to Wish List

Starting at $ 1,199.99 USD

Add to Wish List

Introducing NRW Design's Aluminum S65 Valve Covers – a game-changing solution meticulously crafted to address the persistent challenges associated with factory S65 valve covers. These innovative valve covers have been engineered to set new standards in performance, durability, and aesthetics, making them the ideal choice for BMW enthusiasts. The Problem: Factory S65 valve covers, made from magnesium alloy, suffer from micro porosity and corrosion over time. This leads to the development of unsightly surface "pimples," leaks, and accelerated oxidation. These issues commonly affect gasket channels and edges, resulting in persistent oil leaks that can't be easily resolved by conventional means. The Solution: NRW Design presents a revolutionary answer with the first and only true 1:1 design aluminum valve cover for the BMW S65 engine. Our valve covers have been meticulously designed to eliminate the shortcomings of factory covers, offering a range of unprecedented benefits. Key Benefits: Corrosion-Resistant Aluminum: Unlike magnesium, aluminum is immune to micro porosity, ensuring there's no room for oxidation or corrosion. Aluminum valve covers have a proven track record across various models and manufacturers. True-to-Design Replication: The NRW Design valve covers are faithful reproductions of the original S65 valve covers. Every existing component – from gaskets, bolts, and sensors to caps, plug tubes, separators, and coil packs – fits seamlessly without requiring modifications. Customizable Powder-Coating: Enjoy the freedom to select from a variety of colors and finishes to match your personal style and preferences. Cost-Effective Solution: NRW Design valve covers offer a cost-effective alternative to the original BMW valve covers, delivering exceptional value without compromising on quality. Unmatched Longevity: These valve covers are die-cast from A383 alloy, chosen for its exceptional properties, ensuring unparalleled longevity and stability. Engineered for Performance: NRW Design meticulously retained critical features of the original design, including the high-pressure hump near oil separators, ensuring optimal pressure control and effective oil management. Stringent Quality Control: Each valve cover undergoes rigorous quality checks throughout the manufacturing process, ensuring precision and reliability at every step. Limited Lifetime Warranty: NRW proudly stands behind the quality of their products, supporting it with a lifetime replacement from fit and function.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

Fuel-It! 650HP S65 E9X BMW M3 LPFP Upgrade - w/ 4PSI Hobbs Switch ...

T#:18202901

Part#: FIS65M3LPFP

Back Ordered

$ 514.00 USD

Add to Wish List

Qty

$ 514.00 USD

Add to Wish List

As these cars get older we're seeing more issues with the stock components and more demand for cost-conscious fueling solutions. The new Fuel-It 650HP line of fuel system upgrades are designed with those needs in mind while maintaining a budget. They make the most of the stock components to maintain stock reliability and drive-ability but when the boost gets cranked up, the Fuel-it 650HP components kick in to support the additional fueling needs of your high horsepower car. With the Fuel-It 650HP lineup, you can upgrade your components all at one time or upgrade them as time and budget allows. If upgrading one component at a time, we'd recommend starting with the LPFP first as that is the heart of your fuel system, without a good Low Pressure Fuel pump (LPFP) you can't supply the fuel needed to any of your other components. Your secondary pump can NOT run full time, it must only be run under boost only. Running it full time will place additional strain on the stock system, will lead to high fuel temps, and pump or component failure. To turn the secondary pump on under boost we recommend running the included 4psi Hobb's switch. Included with all S65 LPFP upgrades: Walbro 450 pump (F90000274) Black Anodized Custom fitting Pump brackets 9/64" terminals and associated hardware Fuel line Replacement PITA clip Wiring harness

Show More Show Less

NRW Designs S65 Billet Spark Plug Tube Replacement Viton O-Ring Kit ...

T#:42403035

Part#: S65SPTOK

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

For BMW M3 owners demanding reliability and performance, the NRW Designs S65 Billet Spark Plug Tube Replacement Viton O-Ring Kit from Turner Motorsport offers a durable, leak-free solution that stands up to the demands of spirited driving and track use.

Show More Show Less

1-Piece, Pinned & Unpinned Crank Hub W/ Crank Bolt Capture Plate - BM...

2X Entries Into Our F80 M3 Sweepstakes

T#:48815408

Part#: 034-113-Z015

In Stock

$ 819.00 USD

Add to Wish List

Qty

$ 819.00 USD

Add to Wish List

The factory crank hub is infamous for failure in the BMW N55 & S55 engines. Replace it with this assembly to protect your engine in the most extreme situations.

Fuel-It! Flex Fuel Kit - N54/N55 E Chassis

T#:21242695

Part#: FFK-N5XA

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
09-20-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
09-20-2026

Starting at $ 464.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Chassis BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Port Injection Kit

T#:25839000

Part#: BMW-N54-PRM-750

Ships on Oct 27, 2026

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

T#:26038542

Part#: BMW-EPI-950

Ships on Oct 27, 2026

$ 1,188.00 USD

Add to Wish List

Qty

$ 1,188.00 USD

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - 1 Liter

T#:57616348

Part#: RTF-1L

Ships in 3 Business Days

7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Qty

7% off MSRP

$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Universal Vortex Breather Catch Can

2X Entries Into Our F80 M3 Sweepstakes

T#:587831

Part#: 034-101-4000

Back Ordered

$ 153.00 USD

Add to Wish List

Qty

$ 153.00 USD

Add to Wish List

NRW Design Viton Florine Rubber Oil Cap Gasket O-Ring

T#:42403030

Part#: NRWOCO

Ships in 1 Business Day

$ 10.00 USD

Add to Wish List

Qty

$ 10.00 USD

Add to Wish List

Upgrade your BMW’s reliability or stop an oil leak with the NRW Designed Viton Florine Rubber Oil Cap Gasket O-Ring

Active Autowerke - S65 Gen2 Supercharger Kit (Level 3/ 700HP)- E9X M3...

T#:397305

Part#: 12-030

Ships in 10 Business Days

5% off MSRP $ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Qty

5% off MSRP

$ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 700 horsepower and 480 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Nov 2, 2026

$ 303.99 USD

Add to Wish List

Qty

$ 303.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.

Active Autowerke - S65 Gen2 Supercharger Kit (Level 2/ 640HP)- E9X M3...

T#:397304

Part#: 12-029

Ships in 10 Business Days

5% off MSRP $ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Qty

5% off MSRP

$ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 640 horsepower and 413 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results