BMW Engine Parts for BMW 3 Series E93 (2007-2013)

JE Piston BMW N54B30 3.0T 85MM 9.5:1 KIT

T#:33612912

Part#: 361360

Back Ordered

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

N54B30 3.0T 85MM 9.5:1 JE Pistons for the N54 engine are built for high performance, utilizing forged aluminum for maximum strength and reliability under high boost conditions. Designed specifically for BMW’s twin-turbo 3.0L inline-six, these pistons offer optimized combustion efficiency with precision-engineered domes and valve reliefs. Their lightweight design reduces engine stress, enhancing throttle response and power output. With customizable compression ratios and coatings, JE Pistons are perfect for tuning and high-performance applications, offering durability and performance for both street and track use.

Show More Show Less

Ajusa Intake Manifold Gasket - BMW N52 N54 N55 N63

T#:45963169

Part#: 24030200

Back Ordered

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This intake gasket goes between the cylinder head and the intake runners and should be replaced anytime the intake manifold is removed from the engine.

OEM Rein Upgraded Aluminum Power Steering Pump Pulley - BMW N54 3.0L ...

T#:45997481

Part#: PKP0246

Ships in 3 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Plastic power steering pump pulleys can wear over time or even crack. If you are replacing your pump or if your pulley has worn or failed, upgrade to this aluminum pulley from OEM Rein.

E92 335i/xi N55 Dinan High Capacity Oil Cooler System

Call In Or Chat For Best Price!

T#:389596

Part#: E92N55-D570

Back Ordered

Starting at $ 1,799.99 USD

Add to Wish List

Starting at $ 1,799.99 USD

Add to Wish List

High oil temps are one of the triggers that causes the engine electronics to curtail boost, cut power, and possibly switch to limp mode. The stock oil system was not designed with enough cushion for running more boost. We have seen limp modes come from stock vehicles on the race track. To prevent limp modes and reduced performance, Dinan has developed this oil cooler kit with much more surface area than stock.

The Dinan oil cooler kit fits in the stock location behind the front spoiler on the passenger side of the car. This is an ideal location to maximize the ram air effect from the front bumper. New air ducts and vents into the wheel well help improve air flow. PTFE hoses with race-quality fittings and all hardware are included for install. Some Dinan oil cooler kits can even be used to upgrade cars that never came with an oil cooler. Once you see the Dinan oil cooler side-by-side with the factory cooler, you will understand why it's so much better. The Dinan cooler is bigger in every way - larger capacity, greater surface area, and more cooling tubes.

	Stock	Dinan
Total Oil Volume	9.5oz	19oz
Surface Area	45sq/in	67.5sq/in
# Cooling Tubes	10	23
Tube Length	90 in.	207 in
Tube Area	112.5sq/in	414 sq/in

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The oil cooler kit is worth 3 points towards your Dinan badge.

This item fits the following BMWs:
2011-2013 E92 LCI BMW 335i 335xi - Coupe
2011-2013 E93 LCI BMW 335i - Convertible

Show More Show Less

18" Flexible Magnetic Pickup Tool

T#:641342

Part#: 1711D

Back Ordered

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Cometic Head Gasket - BMW S65B40 - 0.027" Thick

T#:31556164

Part#: C5111-027

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

FAE Oil Pressure Switch - M12x1.5

T#:377029

Part#: 12612367061

Back Ordered

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

N55 Cometic Head Gasket - 0.060"

T#:31522947

Part#: C15476-060

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic MLX Head Gasket - 85mm Bore - .044in - N54B30

T#:26738401

Part#: C15257-044

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. Cometic's MLX Gasket (Multi-Layer-Xtreme) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal. Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface.

Show More Show Less

JE Pistons BMW N54B30 Single Piston

T#:33846580

Part#: 367878S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B

JE Pistons BMW N54B30 Ultra Series Piston - 3.327in Bore (9.5:1 Compression Ratio)

Enhance your BMW N54B30 engine’s performance with the JE Pistons Ultra Series Piston, engineered for those who seek uncompromising power and precision. Featuring a 3.327-inch bore and a 9.5:1 compression ratio, this piston is specifically designed to optimize combustion efficiency and maximize horsepower, making it an excellent choice for both street enthusiasts and competitive racers.

Key Features:

Precision 3.327-Inch Bore: Tailored for the N54B30 platform, this bore size enhances airflow and combustion, translating to significant gains in horsepower and torque while maintaining engine reliability.
Balanced 9.5:1 Compression Ratio: This ideal compression ratio allows for responsive throttle performance, making it suitable for various setups, including turbocharged applications where power and efficiency are paramount.
Ultra Series Forged Construction: Crafted from premium forged aluminum, this piston provides a robust combination of strength and lightweight characteristics, ensuring durability under high-stress conditions.
Advanced Combustion Chamber Design: The uniquely shaped piston crown promotes efficient fuel atomization and burn, enhancing overall engine performance and reducing the risk of pre-ignition or detonation.
Engineered for Performance: JE Pistons are known for their commitment to quality, ensuring that each piston meets stringent performance standards for reliability and longevity.

Applications:

Designed for BMW N54B30 Engines – Ideal for high-performance builds, whether for spirited street driving or competitive motorsport.
Perfect for enthusiasts looking to boost power in turbocharged or naturally aspirated configurations.

Technical Specifications:

Bore Size: 3.327 inches, ensuring optimal fit and performance for the N54B30 engine.
Compression Ratio: 9.5:1, balancing power output with engine safety.
Material: High-strength forged aluminum, offering superior durability and performance.

Show More Show Less

Rear Crankshaft Seal

For vehicles with production date up to 01/2009

T#:13430825

Part#: 11117584398

Back Ordered

$ 16.31 USD

Add to Wish List

Qty

$ 16.31 USD

Add to Wish List

90x110x12mm - usually replaced when servicing the timing chains The front seal or crankshaft seal is one of the most difficult to replace. However, they often fail, and when they do, your car will be marking it's territory with little oil drops wherever you park. Apart from making a mess, it can also cause oil to come in contact with the pulley surfaces. Replace yours and keep your oil in your engine. The perfect time to replace this seal is when you are doing a timing replacement. You already have everything apart, so you might as well add this piece even if it hasn't failed yet as a bit of preventative maintenance.

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2006-2007 models only

T#:26705005

Part#: 090766ECS09KT2

Back Ordered

Sale - Save 8% $ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD

Add to Wish List

Qty

Sale - Save 8%

$ 245.99

This product was last offered at the strikethrough price on
05-03-2026

$ 226.62 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

FAE Oil Pressure Switch - M12x1.5

T#:374049

Part#: 12617568480

Back Ordered

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Leaking or malfunctioning oil pressure switches can be disastrous

Fuel Supply Unit With Fuel Level Sender Unit

T#:56580208

Part#: 16147163296

Special Order: No Guaranteed ETA

$ 105.99 USD

Add to Wish List

Qty

$ 105.99 USD

Add to Wish List

The Febi Bilstein fuel sender unit provides a reliable & affordable solution for your BMW's fuel system.

ARP Head Stud Kit BMW S55 Custom Age 625+

N55 Engines it is a MUST to drill and tap!

T#:41458801

Part#: ARP-HSK-S55-CA

Back Ordered

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Upgrade your S55 with the ARP Head Stud Kit BMW S55 Custom Age 625+ and drive with confidence under pressure.

Fuel Pressure Sensor

T#:56580211

Part#: 13539899007

Special Order: No Guaranteed ETA

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

This Febi Bilstein Fuel Pressure Sensor provides a reliable solution to restore precise fuel monitoring.

5mm Single Groove Valve Keeper - Priced Each

T#:21604312

Part#: KPR-5.0-7S

Back Ordered

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

Aluminum Valve Cover

T#:55857767

Part#: 1006400

Special Order: No Guaranteed ETA

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

This Febi rocker cover is engineered to strict standards, upgrading the assembly to a robust aluminum construction that shrugs off heat and pressure far better than stock plastic components.

Starter Mounting Hardware

T#:594380

Part#: 12410392577

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Modern starter and water pump fasteners are torque-to-yield, meaning they stretch and can only be safely used once. Replace your hardware for peace of mind.

BMW Connecting Rods - 145mm - N54B30 (Set Of 6)

T#:23714964

Part#: SCR7567-6

Back Ordered

$ 1,850.00 USD

Add to Wish List

Qty

$ 1,850.00 USD

Add to Wish List

Vargas N55 GC Turbocharger Upgrade - PWG Wastegate

For vehicles with a Pneumatic Wastegate only!

T#:13891854

Part#: VTT-N55-GC-PWG

Back Ordered

$ 2,761.99 USD

Add to Wish List

Qty

$ 2,761.99 USD

Add to Wish List

Ready to take your N55 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting N55 “GC” and “GC+” turbocharger upgrade. We start by keeping the great design elements of the factory N55 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious N55 power made easy; GCs are a drop-in turbocharger upgrade that supports over 600-700 WHP while maintaining factory-like spool and all factory connections including oil, water, downpipe, and charge pipe.

Show More Show Less

Meyle Outdoor Temperature Sensor / Probe

We Price Match - Give Us A Call or Chat!

T#:579266

Part#: 3009190001

Back Ordered

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Common fix for incorrect OBC temperature readings

CP-Carrillo Forged Piston Set - N54

Upgrade Your N54's Pistons to CP-Carrillo's Forged Piston Set!

T#:25473981

Part#: CP-FPS-N54-84

Back Ordered

Starting at $ 2,292.97 USD

Add to Wish List

Starting at $ 2,292.97 USD

Add to Wish List

CP-Carrillo sets the benchmark for premium aftermarket forged pistons. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW N54 piston set boasts the following features: Lightweight Design: Constructed from forged aluminum alloy, CP-Carrillo pistons offer reduced weight, enhancing engine responsiveness and acceleration for a dynamic driving experience. Advanced Engineering: Leveraging state-of-the-art technology, CP-Carrillo engineers optimize combustion, fuel efficiency, and power output, ensuring peak performance in every application. Wide Configuration Range: With a variety of bore sizes and compression ratios available, CP-Carrillo provides options to tailor pistons to specific engine builds and performance objectives. Quality Construction: Each CP-Carrillo piston undergoes precision machining and rigorous testing to meet exacting standards, guaranteeing consistent quality and performance in every set. Engineered by one of motorsport's most respected names, CP-Carrillo pistons are the ultimate choice for N54 engines, whether for street performance or track dominance. Piston Sets Include: Pistons Rings Pins Locks Spec Sheet Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength Please Note: It is essential to have all engine modifications performed by a qualified professional to ensure proper installation and optimal engine performance, safety, and reliability.

Show More Show Less

Low-Temperature N54 Oil Thermostat Overhaul Kit

For 2008+ models only

T#:26705034

Part#: 090743ECS09KT2

Back Ordered

Sale - Save 8% $ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD

Add to Wish List

Qty

Sale - Save 8%

$ 249.99

This product was last offered at the strikethrough price on
05-03-2026

$ 230.02 USD

Add to Wish List

Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.027" Thick

T#:31556168

Part#: C5112-027

Back Ordered

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Meyle Oxygen Sensor - Pre-Cat Bank 2 - E9X E60 E82 N52

We Price Match - Give Us A Call or Chat!

T#:5944212

Part#: 11787558073

Back Ordered

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high-quality Meyle sensor to turn off your check engine light and restore fuel mileage. This is a Meyle oxygen sensor for BMWs with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Replacement for BMW # 11787558073 and 11787537984. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Engine Oil Pan Kit

T#:556690

Part#: 11137552414

Back Ordered

$ 580.99

This product was last offered at the strikethrough price on
08-13-2026

$ 568.99 USD

Add to Wish List

Qty

$ 568.99 USD

Add to Wish List

Genuine BMW Remanufactured 180 Amp Alternator - E82/88 E9X E60/61 N54...

T#:373810

Part#: 12317558220KT

Back Ordered

$ 1,203.99 USD

Add to Wish List

Qty

$ 1,203.99 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence. Includes a $432.00 core charge to be refunded after we receive your refundable core.

Show More Show Less

Meyle BMW Ignition Coil

T#:40342863

Part#: 12137559842

Ships on Sep 9, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

The Meyle ignition coil (part number 12137559842) is a precision-engineered replacement for BMW factory units, delivering dependable ignition performance across a range of BMW models. Built to meet or surpass OEM standards, it ensures steady spark output and optimized combustion efficiency. With a durable, high-quality design, this coil is built to handle the demands of everyday driving as well as more intensive performance needs.

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.080" Thick

T#:31556167

Part#: C5111-080

Back Ordered

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

T#:590134

Part#: E90BUCKETSTKDS

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

O-Ring - Priced Each

T#:596676

Part#: 11317507432

Back Ordered

$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

This o-ring is located on the timing chain tensioner bolts.

Cometic Head Gasket - BMW S65B40 - 0.057" Thick

T#:31556170

Part#: C5112-057

Back Ordered

$ 183.99 USD

Add to Wish List

Qty

$ 183.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.051" Thick

T#:31556169

Part#: C5112-051

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Gasket For N54 0.040"

T#:31522941

Part#: C15257-040

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

T#:44258354

Part#: BMW-N54PORT-750

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

JE Pistons BMW N55 Single

T#:33846578

Part#: 338096S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B

JE Pistons BMW N55B30 Piston - 3.307 in Bore

Transform your BMW N55B30 engine with the high-performance JE Pistons Piston, engineered for those who demand power, efficiency, and reliability. With a precise 3.307-inch bore size, this piston is designed to enhance combustion dynamics, resulting in improved horsepower and torque. Crafted from premium forged aluminum, the JE piston is built to endure the rigors of high-performance driving, making it an ideal choice for both track enthusiasts and everyday drivers.

Key Features:

Optimized Design: Each piston is meticulously crafted to ensure a perfect fit for the N55B30 engine, maximizing combustion efficiency and overall engine performance.
3.307-Inch Bore: This specific bore size enhances airflow and combustion efficiency, enabling your engine to unleash its full power potential while maintaining reliability.
Durable Forged Construction: Made from high-quality forged aluminum, this piston offers exceptional strength and lightweight properties, making it capable of withstanding extreme conditions found in performance applications.
Enhanced Combustion Characteristics: The uniquely designed piston crown promotes efficient fuel burn, reducing the chances of detonation and improving power delivery across the RPM range.
Trusted Performance: JE Pistons are renowned in the automotive community for their durability and reliability, making them a preferred choice for high-performance builds.

Applications:

Fits BMW N55B30 Engines – Perfect for high-performance applications, whether on the track or on the street.
Ideal for builders looking to enhance their engine’s capabilities, ensuring maximum power and efficiency.

Technical Specifications:

Bore Size: 3.307 inches, specifically designed for optimal performance in the N55B30 engine.
Material: Premium forged aluminum for lightweight and strength.

Show More Show Less

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

Cometic Head Gasket - BMW S65B40 - 0.040" Thick

T#:31556166

Part#: C5111-040

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Cometic Head Gasket - BMW S65B40 - 0.030" Thick

T#:31556165

Part#: C5111-030

Back Ordered

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Genuine BMW Oil Pump - E90 E92 E93 M3

T#:35109

Part#: 11417838311

Back Ordered

8% off MSRP $ 3,746.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,430.99 USD

Add to Wish List

Qty

8% off MSRP

$ 3,746.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,430.99 USD

Add to Wish List

Genuine BMW Oil Pump -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

N54B30 32cc Platinum Series Dish Extreme Duty Piston Set - 84.5mm Bor...

T#:17073602

Part#: 646005CE-6

Back Ordered

8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD

Add to Wish List

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

T#:42133542

Part#: BMW-N55-PRM-950

Back Ordered

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

Gasket, Oil Pump (Lubrication)

T#:54852020

Part#: 071.240

Special Order: No Guaranteed ETA

Sale - Save 14% $ 6.99

This product was last offered at the strikethrough price on
08-14-2026

$ 6.03 USD

Add to Wish List

Qty

Sale - Save 14%

$ 6.99

This product was last offered at the strikethrough price on
08-14-2026

$ 6.03 USD

Add to Wish List

Maintain the lubricating efficiency of your V8 BMW with this premium oil pump suction pipe gasket.

BMW N55 JE Piston ULTRA SERIES

T#:33612896

Part#: 367880

Back Ordered

$ 1,674.99 USD

Add to Wish List

Qty

$ 1,674.99 USD

Add to Wish List

JE Pistons for the N55 engine are high-performance forged pistons designed for BMW’s single-turbo 3.0L inline-six. Built for strength and durability under high boost, they feature optimized crown shapes and valve reliefs for better combustion. The lightweight design reduces rotational mass, improving throttle response and efficiency. With options for compression ratios and coatings, these pistons are perfect for tuning and motorsport use, delivering reliable performance on the street or track.

Show More Show Less