Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install
If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.
Product Features:
Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:
Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation
Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.
60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.
Features and benefits:
Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded
BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E9X N55 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.
With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E82/88 and E90/92/93 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!
To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.
Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your N55-equipped BMW today and drive with confidence!
Features & Benefits:
Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:
Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Aluminum Coolant Bleeder Screw Ball Stud 6mm Fitting Expansion Tank Cap Coolant Level Sensor Product Development:
Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
Installation:
To aid in the installation process, we've assembled a start-to-finish installation guide, including detailed instructions on removing your factory cooling expansion tank and associated components.
Click HERE for Installation Instructions
Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788
Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.
Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.
Upgrade your BMW's cooling system with the Turner Motorsport Mahle Coolant Expansion Tank. This essential component provides additional space for coolant expansion and contraction, ensuring optimal performance in varying temperatures. Designed to withstand drastic temperature changes, this expansion tank prevents coolant leaks and maintains proper coolant levels in your vehicle. Replace your damaged tank to keep your BMW's cooling system running smoothly.
This Genuine BMW radiator expansion tank (coolant reservoir) is used on many BMW's with the N20, N51, N52 and N54 engines. Due to the higher operating temperatures of these engines plastic components are more susceptible to failure. If you are overhauling your coolant system, now is the time to consider preventative replacing this expansion tank.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
This item fits the following BMWs:
2008-2010 E82 BMW 128i 135i
2011+ E82 BMW 128i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2013+ E84 BMW X1 sDrive28i X1 xDrive28i
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Includes the fluid level sensor. Allows for the reserve and overflow of coolant from heating and cooling expansion.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Genuine BMW Expansion Tank -
This item fits the following BMW Chassis:
E82,E90,E92,E93
Fits BMW Engines including:
N55
BMW Black Engine Coolant Reservoir Cap is a premium upgrade designed to enhance both the functionality and aesthetics of your BMW’s engine bay. Unlike flimsy plastic OEM caps, this high-performance cap is CNC-machined from durable billet aluminum, providing long-lasting strength and a sleek, motorsport-inspired look.
Built with precision, this cap retains the essential OEM pressure release function, ensuring proper cooling system operation without compromise. Unlike inferior adhesive covers that may detach over time, this cap fully replaces the factory component, delivering a secure and reliable fit. With a corrosion-resistant black anodized finish, it withstands extreme temperatures and harsh conditions while elevating your BMW’s under-hood appearance.
Upgrade your BMW’s cooling system with the BMW Black Engine Coolant Reservoir Cap, designed for superior performance and long-lasting durability.
The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.
With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.
Features:
Key Benefits:
Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Included is a Moroso (63324) racing radiator cap that operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks Can be polished, chromed, or powder coated or left as-is
The coolant expansion tank provides hot coolant with a place to travel, preventing pressure buildup within your cooling system. On many BMWs, this component is constructed from plastic. While cheap to replace and manufacture, a failed cooling tank can cause costly engine damage.
With this issue in mind, Moroso designed a high-quality replacement. Featuring TIG welded, 100% aluminum construction, this tank is sure to outperform it's factory counterpart.
Features:
Key Benefits:
Direct bolt-in replacement for stock, 2 piece plastic tank Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations & age Features billet aluminum mounting tab/bleeder assembly for strength and precision No cutting of factory hoses is required and accepts the factory clip-on hose Moroso part (63324) racing radiator cap included; operates in the same pressure range as the factory cap Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks This aluminum tank can be polished, chromed, powder coated or left as-is
BMW Blue Engine Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Constructed from high-quality billet aluminum, this cap replaces the flimsy plastic factory cap, offering improved durability and a sleek, high-performance aesthetic.
Designed with precision, this coolant reservoir cap incorporates the OEM pressure relief function to maintain proper cooling system operation. Unlike inferior stick-on covers that may loosen over time, this cap is a complete replacement, ensuring a secure, leak-free fit. The blue anodized finish provides superior corrosion resistance, making it a reliable upgrade for daily drivers and track enthusiasts alike.
Upgrade your BMW’s cooling system with the BMW Blue Engine Coolant Reservoir Cap, designed for superior reliability and style.
BMW Silver Engine Coolant Reservoir Cap is a premium upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Crafted from high-strength billet aluminum, this cap replaces the factory plastic version, offering superior durability and a refined, professional look.
Designed with functionality in mind, it integrates the OEM pressure relief system to ensure your engine's cooling system remains safe and efficient. Unlike adhesive covers, which can peel or wear over time, this cap is a direct-fit replacement, providing a secure and leak-proof seal. The silver anodized finish not only enhances the visual appeal but also ensures resistance to corrosion, high temperatures, and wear, making it perfect for daily driving and track use.
Enhance your BMW’s cooling system with the BMW Silver Engine Coolant Reservoir Cap, providing both style and functionality for years to come.
Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.
ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.
Each connector includes an additional terminal in case one becomes lost or damaged during installation.
*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.
Please reference the original part number from the existing connector to confirm fitment, before ordering.
Suggested tools:
Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943
