Packaged by Turner for BMW 3 Series E93 (2007-2013)

Top-Tier BMW N54/N55 Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21670137

Part#: TMSN5SPCOILKT

In Stock

Sale - Save 13% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Qty

Sale - Save 13%

$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 248.31 USD

Add to Wish List

Upgrade your BMW N54 and N55 engine with Packaged by Turner kits for optimized performance and fuel efficiency. Our BMW ignition coils feature specialized modifications to boost firepower, delivering increased torque at lower RPMs and more horsepower at higher RPMs. The extent of improvement depends on your engine's current condition, but you'll undoubtedly experience a noticeable difference in performance. Ensure your BMW's engine runs smoothly and efficiently with our comprehensive ignition service kit from ECS Tuning. This kit includes six Bav Auto ignition coils with plug boots, NGK spark plugs, American Grease Stick dielectric grease, and a BMW spark plug service indicator label. Rest assured with a 2-year warranty on all Bavarian Autosport brand parts. Upgrade your BMW N54 and N55 engine's ignition system today for a remarkable driving experience.

Show More Show Less

Oil Filter Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677487

Part#: 11427542983-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW E82/88 E9X...

10X Entries Into Our F80 M3 Sweepstakes

T#:22163417

Part#: 11287582946TKT

Ships on Nov 12, 2026

Sale - Save 9% $ 223.99

This product was last offered at the strikethrough price on
09-16-2026

$ 204.63 USD

Add to Wish List

Qty

Sale - Save 9%

$ 223.99

This product was last offered at the strikethrough price on
09-16-2026

$ 204.63 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, belt tensioner, and idler pullies. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Oil Pan Gasket Replacement Kit

For vehicles with automatic transmission only

10X Entries Into Our F80 M3 Sweepstakes

T#:5403285

Part#: 11137548031TMSKT

In Stock

$ 221.99 USD

Add to Wish List

Qty

$ 221.99 USD

Add to Wish List

Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

E9X M3 Build Your Own Maintenance Service Package

10X Entries Into Our F80 M3 Sweepstakes

T#:340275

Part#: TMS14374

In Stock

Sale - Save 7% $ 241.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 225.96 USD

Add to Wish List

Sale - Save 7%

$ 241.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 225.96 USD

Add to Wish List

Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service

(click to expand)

engine oil change with filter, using OE BMW-Castrol 10W60 oil
replace drain bolt crush washer
reset oil service/maintenance light
inspect and top off any other fluids

Annual Service

(click to expand)

air filter cleaning or replacement
A/C cabin microfilter replacement
brake fluid flush/bleeding
top off power steering fluid
engine oil analysis (to check for internal engine wear)
DCT transmission filter replacement (BMW recommends every 3rd oil change)
wiper blade replacement
lubricate door hinges and treat rubber door seals
inspect or replace emergency tire repair kit
inspect belts for cracking or stretching
inspect intake boots and vacuum lines for cracks
inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
inspect bushing and ball joints for excess play/movement
ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

40,000 Mile Major Service

(click to expand)

engine oil change with filter, using OE BMW-Castrol 10W60 oil
reset oil service/maintenance light
air filter replacement or cleaning for aFe/K&N type
fill and bleed cooling system
transmission fluid and filter change
differential fluid change, using Red Line 75/140 or Motul GearComp 75/140
brake fluid flush/bleeding
spark plug replacement
valve cover gasket replacement
engine and A/C serpentine belt replacement
inspect belt roller pulleys (drag and rotation), main accessory pulleys (cracking), and belt tensioners
complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear trailing arm bushings, rear upper shock mounts, rear subframe mounts, rear sway bar mounting tabs, axle shaft boots
complete brake system test and inspection
engine and transmission leak detection and diagnosis
shifter linkage, driveshaft guibo, CV, and center support bearing inspection
exhast system inspection, including hanger replacement

This package fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Put a check in the boxes next to the items you wish to order.

Show More Show Less

ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel - FX250 Stage ...

For Vehicles With 6 Bolt Crankshaft (Production Date From 02/09)

10X Entries Into Our F80 M3 Sweepstakes

T#:41897500

Part#: FW-075-AL250TKT

Ships on Dec 14, 2026

$ 1,759.99 USD

Add to Wish List

Qty

$ 1,759.99 USD

Add to Wish List

Upgrade your BMW's drivability and clutch durability with the ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel – FX250 Stage 2 from Turner Motorsport—a refined yet capable solution for the performance-minded daily driver

Show More Show Less

Premium Differential Service Kit - E46 M3, E9X M3, E82 1 M Coupe ...

10X Entries Into Our F80 M3 Sweepstakes
Includes BMW SAF-XJ limited slip differential fluid with FM booster

T#:598688

Part#: E46M3DIFSERTMSKT

In Stock

Sale - Save 5% $ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 286.01 USD

Add to Wish List

Qty

Sale - Save 5%

$ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 286.01 USD

Add to Wish List

Servicing your differential is an important job and should only be completed using high quality components! To ensure our customers are getting exactly what they need, we have put together this limited-slip differential service kit that includes all new fluid from BMW, a new BMW drain plug, and one of our new Titanium Magnetic Differential Drain Plugs!

Show More Show Less

M3/1M Front and rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:557628

Part#: 33322283547KT9

Ships on Feb 8, 2027

$ 975.03 USD

Add to Wish List

Qty

$ 975.03 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Automatic Transmission Service Kit - E82/88 E83 E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:554533

Part#: N5XATSKT2

In Stock

Sale - Save 5% $ 248.99

This product was last offered at the strikethrough price on
06-04-2026

$ 237.18 USD

Add to Wish List

Qty

Sale - Save 5%

$ 248.99

This product was last offered at the strikethrough price on
06-04-2026

$ 237.18 USD

Add to Wish List

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

Automatic transmission filter with associated hardware
Oil pan gasket
Drain plug with sealing washer
Fill plug with sealing washer
7 quarts Redline D6 automatic transmission fluid

Fits the following BMWs:
E82/88 BMW 128i - with GA6L45R automatic transmission
E83 BMW X3 N52 3.0L - with GA6L45R automatic transmission
E9X BMW 328i/xi - with GA6L45R automatic transmission

Show More Show Less

Front Lower Control Arm - Right - E82 1M, E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338352

Part#: 31102283578X

Ships on Feb 8, 2027

$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

Starting at $ 110.27 USD

Add to Wish List

Starting at $ 110.27 USD

Add to Wish List

This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible

Show More Show Less

Gear Selector Valve Replacement Kit - BMW E9X E82/88 w/ GA6L45R Autom...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344795

Part#: GA6L45RGSVKT

Ships in 6 Business Days

$ 453.99 USD

Add to Wish List

Qty

$ 453.99 USD

Add to Wish List

A common failure point that causes the loss of gear selection, this kit includes everything needed to replace the gear selector valve connected to your transmission valve body.

Bosch Starter Motor With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

DCT Transmission Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710778

Part#: 28107850241-KT

In Stock

Sale - Save 1% $ 396.99

This product was last offered at the strikethrough price on
07-14-2026

$ 394.63 USD

Add to Wish List

Qty

Sale - Save 1%

$ 396.99

This product was last offered at the strikethrough price on
07-14-2026

$ 394.63 USD

Add to Wish List

The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime. Kit includes: 5 quarts of Pentosin DCTF-1 fluid DCT transmission cartridge and suction filters Drain and fill plugs Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.

Show More Show Less

OE Replacement Rotor And Pad Replacement Package - Front And Rear - E...

10X Entries Into Our F80 M3 Sweepstakes

T#:558208

Part#: E9XM3RPRPKT

Ships in 8 Business Days

Sale - Save 2% $ 1,858.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,825.85 USD

Add to Wish List

Qty

Sale - Save 2%

$ 1,858.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,825.85 USD

Add to Wish List

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Pagid Front & Rear Brake Pads
Zimmerman Front & Rear Rotors
New Front & Rear Wear Sensors
Brand New Stainless Steel Set Screws
Syl-Glide Silicone Brake Lubricant

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

Show More Show Less

Liqui Moly Special Tec LL Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:15644277

Part#: 071199631290KT

In Stock

Sale - Save 6% $ 109.06

This product was last offered at the strikethrough price on
08-31-2026

$ 102.07 USD

Add to Wish List

Qty

Sale - Save 6%

$ 109.06

This product was last offered at the strikethrough price on
08-31-2026

$ 102.07 USD

Add to Wish List

To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)

Show More Show Less

Turner BMW 15mm Wheel Spacer Kit - Normal Pad Size

10X Entries Into Our F80 M3 Sweepstakes

T#:6181661

Part#: TWH9905013T

In Stock

Sale - Save 23% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 131.24 USD

Add to Wish List

Sale - Save 23%

$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 131.24 USD

Add to Wish List

With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive

Show More Show Less

Basic High Pressure Fuel Pump Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644266

Part#: 13517616170-KT

In Stock

$ 1,678.35

This product was last offered at the strikethrough price on
06-19-2026

$ 1,677.85 USD

Add to Wish List

Qty

$ 1,677.85 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N54 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket

Brake Line Replacement/ Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:597287

Part#: 022756TMS09KT

Ships on Nov 3, 2026

Sale - Save 8% $ 412.99

This product was last offered at the strikethrough price on
05-03-2026

$ 379.75 USD

Add to Wish List

Qty

Sale - Save 8%

$ 412.99

This product was last offered at the strikethrough price on
05-03-2026

$ 379.75 USD

Add to Wish List

Turner Motorsport stainless steel brake lines with fluid and tools for a complete DIY

Rotor And Pad Replacement Package - Front And Rear - E9X 335i/is/d, E...

10X Entries Into Our F80 M3 Sweepstakes

T#:558198

Part#: E9X335RPRPKT

Ships in 1 Business Day

Sale - Save 13% $ 786.64

This product was last offered at the strikethrough price on
05-03-2026

$ 680.73 USD

Add to Wish List

Qty

Sale - Save 13%

$ 786.64

This product was last offered at the strikethrough price on
05-03-2026

$ 680.73 USD

Add to Wish List

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

Akebono Euro Front & Rear Brake Pads
Zimmerman Front & Rear Rotors
New Front & Rear Wear Sensors
Brand New Stainless Steel Set Screws
Syl-Glide Silicone Brake Lubricant

Fits the following BMWs:
2006+ E9X BMW 335i/is/xi/d
2012-2015 E84 BMW X1 xDrive35i

Show More Show Less

Valvetronic Camshaft Adjuster replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677492

Part#: 11127556161-KT

In Stock

Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Qty

Sale - Save 19%

$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Valv-tronic adjuster unit, Changes the the timing shaft to adjust the valve timing.

BMW Water Pump And Thermostat Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:378340

Part#: 11517632426KT3

In Stock

Sale - Save 3% $ 665.86

This product was last offered at the strikethrough price on
06-15-2026

$ 647.35 USD

Add to Wish List

Qty

Sale - Save 3%

$ 665.86

This product was last offered at the strikethrough price on
06-15-2026

$ 647.35 USD

Add to Wish List

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

M3 Rear Guide Rod Upgrade - Left and Right - E82, E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:340278

Part#: TMS12080

Ships in 1 Business Day

Starting at $ 302.98 USD

Add to Wish List

Starting at $ 302.98 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This package includes:

Left M3 Guide Rod - 33322283547
Right M3 Guide Rod - 33322283548

Buy as a package and save $$!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

High Pressure Fuel Pump Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5389771

Part#: N55HPFKKT

In Stock

$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD

Add to Wish List

Qty

$ 1,743.99 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!

Show More Show Less

Oil Pan Gasket - With Bolts

10X Entries Into Our F80 M3 Sweepstakes

T#:15644297

Part#: 11132210959-KT

In Stock

Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

Qty

Sale - Save 3%

$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41695012

Part#: 6B1584H-STDLMTKT

In Stock

Sale - Save 2% $ 466.99

This product was last offered at the strikethrough price on
08-31-2026

$ 459.55 USD

Add to Wish List

Qty

Sale - Save 2%

$ 466.99

This product was last offered at the strikethrough price on
08-31-2026

$ 459.55 USD

Add to Wish List

Rod bearings are a known issue for your N54, replace them to prolong life of your Engine!

E9X M3 Shocks and Spring Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:553638

Part#: 31302283650KT3

Ships in 1 day

$ 989.99

This product was last offered at the strikethrough price on
08-25-2026

$ 986.99 USD

Add to Wish List

Qty

$ 986.99 USD

Add to Wish List

This kit contains all new strut and shock mounts and hardware needed when installing new shocks and struts or aftermarket suspension on your vehicle. Fits the following BMWs E9X M3 Without M Dynamic Suspension

Show More Show Less

Wastegate Repair Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:41863724

Part#: 116575857456TKT

Ships on Oct 21, 2026

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

Get rid of that annoying N54 Wastegate Rattle for good!

Fuel Injector Replacement Kit - N52

10X Entries Into Our F80 M3 Sweepstakes

T#:53044116

Part#: 13537531634RKT2

Ships in 6 Business Days

Sale - Save 16% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.69 USD

Add to Wish List

Qty

Sale - Save 16%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.69 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

Pierburg Full Aluminum Water Pump With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:6091465

Part#: 11515A05704APKT

Back Ordered

Sale - Save 1% $ 532.99

This product was last offered at the strikethrough price on
05-30-2026

$ 526.79 USD

Add to Wish List

Qty

Sale - Save 1%

$ 532.99

This product was last offered at the strikethrough price on
05-30-2026

$ 526.79 USD

Add to Wish List

If your water pump is starting to fail, you may notice coolant leaks, or even hear a whining noise coming from under the hood. If you think your water pump is starting to fail, replace it as soon as you can. The main downside to an electric water pump is you may also notice nothing - nothing but overheating! Keep your eyes peeled for warning signs it may be time to replace your water pump. N54 and N55 engines are prone to water pump failure - replace every 60,000 miles. Comes with electric water pump and installation hardware. Aluminum mounting bolts are one time use. Replace every time the water pump is removed.

Show More Show Less

70c Low Temp Oil Thermostat Kit - N54/N55

10X Entries Into Our F80 M3 Sweepstakes

T#:30031507

Part#: N54N55LTKT1

Back Ordered

Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Qty

Sale - Save 18%

$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241396

Part#: TMSN54BPKT

Back Ordered

$ 565.99

This product was last offered at the strikethrough price on
09-29-2026

$ 564.99 USD

Add to Wish List

Qty

$ 564.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924

Show More Show Less

Rear Upper Shock Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710806

Part#: 33506771738-KT

In Stock

Sale - Save 1% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

Qty

Sale - Save 1%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your E9X BMW. The following parts are included. Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2)

Show More Show Less

Cabin Air Filter Cover Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677543

Part#: 64316987498-KT

In Stock

$ 207.99

This product was last offered at the strikethrough price on
08-04-2026

$ 206.99 USD

Add to Wish List

Qty

$ 206.99 USD

Add to Wish List

Over time plastic parts in your engine compartment that are exposed to the elements will become brittle and break or deteriorate. Replace yours today to keep your plastic trim looking fresh.

Rear Differential Service Kit for various BMW Models

10X Entries Into Our F80 M3 Sweepstakes

T#:42133544

Part#: 835225790TKT

In Stock

Sale - Save 2% $ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD

Add to Wish List

Qty

Sale - Save 2%

$ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD

Add to Wish List

The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

Turner Rear Suspension Refresh Kit (M Upgrade) - Level 2 - E90/92/93 ...

This kit features upgraded M3 control arms with bushings and M3 subframe bushings for a...

10X Entries Into Our F80 M3 Sweepstakes

T#:583060

Part#: T33322406291KT

Ships in 4 Business Days

$ 1,234.18 USD

Add to Wish List

Qty

$ 1,234.18 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Suspension Bushings
Control Arm Bushings
Hardware
Rear Shock Mounts
Control Arms & Trailing Arms

Show More Show Less

Cam Bearing Ledge Replacement Kit - N54

10X Entries Into Our F80 M3 Sweepstakes

T#:640352

Part#: 11127531224KT2

Ships in 1 day

$ 1,660.16 USD

Add to Wish List

Qty

$ 1,660.16 USD

Add to Wish List

Over time the bearing ledges in your N54 can be damaged by contaminated oil or a malfunctioning VANOS which can cause grooves to form in the bearing ledges. This kit contains everything necessary to replace these as well as important hardware.

Show More Show Less

N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241397

Part#: TMSE90N55BPKT

Ships in 1 day

$ 623.99 USD

Add to Wish List

Qty

$ 623.99 USD

Add to Wish List

BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter

Show More Show Less

Genuine BMW Rear Guide Rod Upgrade - Left - E82, E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:338095

Part#: 33322283547

Ships in 1 Business Day

Starting at $ 152.99 USD

Add to Wish List

Starting at $ 152.99 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

Basic Cooling System Service Kit - E82/88 E9X N54 3.0L w/ Auto or DCT...

For vehicles with automatic or DCT transmissions

10X Entries Into Our F80 M3 Sweepstakes

T#:557234

Part#: E8XE9XN54BCKT

Ships in 1 day

$ 1,034.99

This product was last offered at the strikethrough price on
04-17-2026

$ 996.99 USD

Add to Wish List

Qty

$ 996.99 USD

Add to Wish List

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Show More Show Less

Liqui Moly MolyGen Oil Change Kit / Inspection I

10X Entries Into Our F80 M3 Sweepstakes

T#:15511874

Part#: 114275663271KT

In Stock

Sale - Save 7% $ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 112.88 USD

Add to Wish List

Qty

Sale - Save 7%

$ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 112.88 USD

Add to Wish List

Change your oil with ease with this oil change kit including seven quarts of oil, an oil filter, and a drain plug!

Turner Rear Suspension Refresh Kit - Level 1 - E90/92/93 RWD Non-M ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583020

Part#: T33526768544KT

Ships in 1 day

Sale - Save 1% $ 330.99

This product was last offered at the strikethrough price on
08-28-2026

$ 327.58 USD

Add to Wish List

Qty

Sale - Save 1%

$ 330.99

This product was last offered at the strikethrough price on
08-28-2026

$ 327.58 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Sway Bar End Links
Rear Trailing Arm Bushings
Rear Strut Mounts
New Hardware

Show More Show Less

Rear Guide Rod Upgrade - Right - E82, E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:338096

Part#: 33322283548

In Stock

Starting at $ 149.99 USD

Add to Wish List

Starting at $ 149.99 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

OEM Ignition Service Kit - N52 (04/2006+)

10X Entries Into Our F80 M3 Sweepstakes

T#:556738

Part#: N52TISKT

In Stock

Sale - Save 3% $ 273.99

This product was last offered at the strikethrough price on
06-15-2026

$ 266.21 USD

Add to Wish List

Qty

Sale - Save 3%

$ 273.99

This product was last offered at the strikethrough price on
06-15-2026

$ 266.21 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Rotor And Pad Replacement Package - Rear - E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:558210

Part#: E9XM3RPRPKT3

Ships in 8 Business Days

Sale - Save 12% $ 948.99

This product was last offered at the strikethrough price on
09-14-2026

$ 838.51 USD

Add to Wish List

Qty

Sale - Save 12%

$ 948.99

This product was last offered at the strikethrough price on
09-14-2026

$ 838.51 USD

Add to Wish List

Oil Filter Housing Gasket Kit - N52 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24212294

Part#: N52OFHGKT

In Stock

Sale - Save 3% $ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

Qty

Sale - Save 3%

$ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

A leaking gasket can cause headaches down the road, usually when you least expect it. The N52 engine can suffer a particularly troublesome leak around the oil filter housing gasket. Generally seen as something to keep an eye on, this is not something that should be put off. The upgraded Bavarian Autosport gasket is made from a DuPont Viton rubber that has a higher temperature and chemical resistance than the stock gasket material. This gasket should last the lifetime of the engine without breaking down and leaking like the Genuine BMW parts do.

Show More Show Less

Ignition Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677540

Part#: 12138616153-KT

In Stock

$ 240.99

This product was last offered at the strikethrough price on
07-27-2026

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Coils with locks 6 spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease

Show More Show Less

Turner OEM Clutch Installation Kit - E9X 335i/is

10X Entries Into Our F80 M3 Sweepstakes

T#:554615

Part#: E9X335CIKT

In Stock

$ 547.99

This product was last offered at the strikethrough price on
04-17-2026

$ 511.99 USD

Add to Wish List

Qty

$ 511.99 USD

Add to Wish List

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

Flywheel bolts
Bolts bell housing, one time use!
All hardware to re-mount the driveshaft
Pilot Bearing
Clutch fork pivot pin
Clutch alignment tool
Metal Guibo
Center support bearing

Fits the following BMWs:
E9X BMW 335i/is N54 N55

Show More Show Less

Brake Fluid Flush Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15710809

Part#: 007091ECS02-KT

Ships on Nov 30, 2026

Sale - Save 17% $ 162.31

This product was last offered at the strikethrough price on
05-03-2026

$ 135.16 USD

Add to Wish List

Qty

Sale - Save 17%

$ 162.31

This product was last offered at the strikethrough price on
05-03-2026

$ 135.16 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first. A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush on your vehicle. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Pentosin Super DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench

Show More Show Less

Turner BMW 20mm Wheel Spacers (Pair) - Normal Pad

10X Entries Into Our F80 M3 Sweepstakes

T#:6181670

Part#: TWH9905020T

In Stock

Sale - Save 18% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.99 USD

Add to Wish List

Sale - Save 18%

$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 127.99 USD

Add to Wish List

20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Project Cars

SELECT YOUR BMW

Packaged by Turner for BMW 3 Series E93 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results