BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit
10X Entries Into Our F80 M3 Sweepstakes
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 20% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Sale - Save 20%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5376276
Part#: 11427953129TKT
Ships in 4 Business Days
Sale - Save 14% $ 116.99

This product was last offered at the strikethrough price on
08-17-2026

$ 101.06 USD
Free Shipping
Sale - Save 14%
$ 116.99

This product was last offered at the strikethrough price on
08-17-2026

$ 101.06 USD
Free Shipping
This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. This kit from Turner Motorsport contains all that you will need to do your regular service on your vehicle. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit New Drain Plug with Crush Washer UV Flashlight Make your next service a quality one with this new kit from Turner Motorsport
Show More Show Less
Liqui Moly Special Tec B 5W-30 Oil Change Kit - B58 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23847536
Part#: LMSPC5W30KT
Ships in 4 Business Days
Sale - Save 6% $ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 114.59 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 114.59 USD
Free Shipping on orders $49 and up

Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.

This comprehensive kit includes:

  • 7L Special Tec B 5W-30 Motor Oil
  • Engine Oil Filter with o-ring
  • Oil Drain Plug with o-ring

Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.

Show More Show Less

Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets

Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
B58 Liqui Moly Top Tec 6600 0W-20 Oil Change Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:22130458
Part#: LMTPTCHOILCHNGKT
Ships in 4 Business Days
Sale - Save 7% $ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 106.18 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 106.18 USD
Free Shipping on orders $49 and up
Ensuring your vehicle's peak performance relies on consistent maintenance. BMW's recommended oil change interval varies according to your driving habits. For optimal results, we advise changing the oil every 10,000 miles. However, for more aggressive or city driving, a 5,000-mile oil service interval is the preferred choice. This comprehensive kit includes: 7L of Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with an o-ring Oil Drain Plug with an o-ring Maintain the flawless operation of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less

Water Pump And Thermostat Kit - BMW N55 F Chassis
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:39093005
Part#: 11518635090KT6
In Stock
$ 470.99

This product was last offered at the strikethrough price on
06-03-2026

$ 449.99 USD
Free Shipping on orders $49 and up
$ 449.99 USD
Free Shipping on orders $49 and up

Water Pump And Thermostat Kit - BMW N55 F Chassis

Ensure optimal engine cooling and performance with this high-quality Water Pump And Thermostat Kit - BMW N55 F Chassis. In the mid-2000s, BMW introduced electronically controlled water pumps and thermostats for better temperature regulation and efficiency. However, these components tend to have a shorter lifespan compared to traditional mechanical designs, often failing before BMW’s recommended 80,000-mile service interval.

This complete kit from Turner Motorsport includes premium-quality components that match OEM specifications, providing reliable and efficient cooling system performance. Maintaining a properly functioning cooling system helps prevent overheating, enhances efficiency, and extends engine life.

Signs Your Water Pump and Thermostat May Need Replacement:

  • Engine overheating or failing to reach operating temperature
  • Water pump running intermittently or erratically
  • Cooling fans operating at maximum output
  • Engine fault codes, including 20A804

Upgrade your BMW N55 F Chassis cooling system with this all-in-one kit for worry-free performance and longevity.

Show More Show Less
Tekwax Rust Proofing Spray - Winzer
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi
Winzer - Corporate Logo
T#:556907
Part#: 891.9016KT
In Stock
$ 22.00

This product was last offered at the strikethrough price on
09-03-2026

$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Being a New-England based company we see all variations of weather conditions. And we've seen more than a lot of seized coil overs and other metal items that have fallen prey to corrosion and rust. This Winzer Tek Wax is the best defense against corrosion that we have yet to come across. TekWax is a heavy-duty, flexible wax that you spray onto metal surfaces and it forms a durable protective film. It was originally used as a sealant for wheel wells, bodyshells, rocker panels, and chassis panels which makes it ideal for un-coated and exposed metal parts on your car. It has a high-quality matte amber finish that is also slightly tacky to the touch. Another plus is that it can give some components an original OEM appearance. We spray Tech Wax on our coilover threads to keep salt and sand from gumming up the threads and seizing the adjustment collars. We also use it on other exposed metal surfaces that don't have any corrosion protection from their manufacturers (steering hose fittings, even fastners and hardware). The finished surface has an amber (gold-ish) hue that blends in with many other hard parts on the car and it has an overall 'finished' look. TekWax is sold as a 24oz aerosol can. It ships by UPS Ground only. Follow instructions on the can for the best and safest results.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555453
Part#: LMOCK28KT
Ships in 4 Business Days
Sale - Save 21% $ 123.99

This product was last offered at the strikethrough price on
08-19-2026

$ 98.09 USD
Free Shipping
Sale - Save 21%
$ 123.99

This product was last offered at the strikethrough price on
08-19-2026

$ 98.09 USD
Free Shipping
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes: 7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil Liqui Moly UV Flashlight Hengst Oil Filter Kit Febi Oil Drain Plug & Washer Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks! The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%! MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!) Smooth engine running characteristics Long engine service life due to exceptional protection against wear Rapid oil delivery at low temperatures Optimum oil pressure at all engine speeds Premium lubrication reliability at high and low temperatures High shear and ageing stability Reduces fuel consumption and pollutant emissions Outstanding engine cleanliness Tested with catalytic converters and performance proven with turbochargers Miscible and compatible with commercially-available engine oils Approved for the following specifications: ACEA C3 API SN / CF VAG 502.00 / 505.00 BMW Longlife-01 Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24145950
Part#: B48LMTTOSKT
Ships in 4 Business Days
Sale - Save 14% $ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 89.99 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 89.99 USD
Free Shipping on orders $49 and up
To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring
Show More Show Less
Burger Motorsports - Corporate Logo
T#:3586313
Part#: REPLACEMENT-N55F
In Stock
$ 70.00 USD
Free Shipping
$ 70.00 USD
Free Shipping

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

  • Designed for N55 engines
  • Optimizes airflow for increased power
  • Improves throttle response and fuel efficiency
  • Protects engine from contaminants
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less


N54/N55 Low Temp Oil Thermostat Kit - 70c
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
Aluminum Valve Cover kit - F22/23 F3X F87 N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23913951
Part#: F3XN55MVCKT
In Stock
Sale - Save 19% $ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 328.81 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 406.99

This product was last offered at the strikethrough price on
05-03-2026

$ 328.81 USD
Free Shipping on orders $49 and up
If your valve cover has become cracked or warped, replace it with this quality Aluminum Valve Cover from Bremmen Parts to prevent leaks and further valvetrain damage. The upgraded aluminum valve cover included in this kit is the perfect solution to replace standard plastic valve covers that crack and split over time, leading to oil leaks! This kit includes everything needed to install a new valve cover, including a new CCV hose, gaskets, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:22130463
Part#: LMTECLLCHNGIN1KT
Ships in 4 Business Days
Sale - Save 6% $ 105.07

This product was last offered at the strikethrough price on
08-31-2026

$ 98.34 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 105.07

This product was last offered at the strikethrough price on
08-31-2026

$ 98.34 USD
Free Shipping on orders $49 and up
Ensuring your driving machine remains in optimal condition necessitates consistent maintenance. BMW's recommended oil change interval depends on your driving habits. We recommend changing your oil after a maximum of 10,000 miles. For those engaging in aggressive or city driving, a 5,000-mile oil service interval is preferable. This kit comprises: Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (included with filter kit) Sustain the flawless performance of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less

OEM Accessory Belt Service Kit - F3X F22/23 N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:587391
Part#: 11287628661ABKT
In Stock
$ 171.99

This product was last offered at the strikethrough price on
06-09-2026

$ 153.99 USD
Free Shipping
$ 153.99 USD
Free Shipping
This kit includes the basic components recommended to replace when it comes time to swap out your accessory belt.
OE Rear Upper Shock Mount Kit w/ Hardware - F3X F2X
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:639047
Part#: 33506862725KT2
In Stock
Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Sale - Save 3%
$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36
Show More Show Less

Packaged by Turner - Corporate Logo
T#:22097553
Part#: 11287628661TKT
In Stock
Sale - Save 23% $ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 131.99

This product was last offered at the strikethrough price on
06-16-2026

$ 101.98 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
BMW N54 N55 S55 Mosselman Thermostat Installation Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:4799665
Part#: THERMINSTALLKT
In Stock
Sale - Save 6% $ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up

BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.

  • Complete Kit: Includes all essential gaskets and components required for a hassle-free thermostat installation.
  • Optimal Performance: Ensures proper installation of the Mosselman thermostat, leading to improved engine cooling efficiency and performance.
  • High-Quality Components: Gaskets and parts are manufactured to meet high standards of durability and reliability.
  • Precision Fit: Engineered to match OEM specifications, providing a perfect fit and reliable performance.
  • Ease of Installation: All necessary parts are included, simplifying the installation process and reducing the need for additional purchases.

Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.

Show More Show Less

Water Pump And Thermostat Kit - N20
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554053
Part#: 11517604027KT1
Ships in 1-2 days
Sale - Save 25% $ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping
Sale - Save 25%
$ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

  • Mahle-Behr thermostat
  • Pierburg water pump
  • Genuine BMW coolant
  • Mounting hardware required for both the thermostat and water pump

 

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:22789662
Part#: OILCHGN5XKT
Ships in 4 Business Days
Sale - Save 4% $ 125.99

This product was last offered at the strikethrough price on
08-31-2026

$ 120.33 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 125.99

This product was last offered at the strikethrough price on
08-31-2026

$ 120.33 USD
Free Shipping on orders $49 and up

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

  • Seven Liters of BMW Synthetic Engine Oil
  • Engine Oil Filter
  • Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099866
Part#: 31126854727TKT
In Stock
Sale - Save 3% $ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 481.99

This product was last offered at the strikethrough price on
05-03-2026

$ 467.50 USD
Free Shipping on orders $49 and up
Give your BMW the sharp handling it was engineered for with the Front Control Arm Refresh Kit, the perfect solution for a complete front suspension overhaul.


Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:43378539
Part#: B58G1OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
Back Ordered
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
Ships in 8 Business Days
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters

Valvetronic Actuator Replacement Kit - N20 2.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:24212289
Part#: 11377603979N20KT
In Stock
Sale - Save 10% $ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.61 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 282.99

This product was last offered at the strikethrough price on
05-03-2026

$ 255.61 USD
Free Shipping on orders $49 and up
If your Valvetronic Actuator has failed, this kit includes a new actuator and all of the basic gaskets necessary to replace the actuator. OEM VDO Valvetronic Actuator Actuator Gasket Valve Cover Gasket
Show More Show Less
Performance Brake Fluid Flush Kit - Level 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
Ships on Sep 24, 2026
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

ZEP - Corporate Logo
T#:411
Part#: 0382
Back Ordered
$ 42.99 USD
Free Shipping on orders $49 and up
ZEP-O-SHINE is a premium grade concentrated car wash. It is a highly concentrated product that literally "pries-off" dirt. Sensationally fast and economical too, it contains a special polymer wax which leaves the finish with that brighter, newer look. After the surface is dry, rubbing gently with a soft cloth produces an even glossier sheen. ZEP-O-SHINE washed finishes are more weatherproof. Phosphate free!

Directions:
Dilute 1 to 3 ounces ZEP-O-SHINE per gallon of water. Place the proper amount of ZEP-O-SHINE in a handy container, add the water in a strong stream to produce suds. Wash the car as usual, dry with a soft cloth rubbing gently to a rich glossy sheen.

BIODEGRADABLE: All detergents used in the manufacture of this product are biodegradable.
Show More Show Less
Front Suspension Refresh Kit - F2X, F3X
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:711928
Part#: 31126852991KT2
Back Ordered
$ 553.99

This product was last offered at the strikethrough price on
04-06-2026

$ 490.99 USD
Free Shipping
$ 490.99 USD
Free Shipping
Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
$ 209.56 USD
Free Shipping on orders $49 and up
$ 209.56 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:555429
Part#: LMOCK4KT
Ships in 4 Business Days
Sale - Save 13% $ 115.99

This product was last offered at the strikethrough price on
08-31-2026

$ 100.79 USD
Free Shipping
Sale - Save 13%
$ 115.99

This product was last offered at the strikethrough price on
08-31-2026

$ 100.79 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Longtime High Tech Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
N20/N26 Complete Timing Chain Kit - BMW N20 RWD
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21012589
Part#: N20N26TIMINGCHAI
Ships in 6 Business Days
$ 797.99

This product was last offered at the strikethrough price on
09-03-2026

$ 765.99 USD
Free Shipping on orders $49 and up
$ 765.99 USD
Free Shipping on orders $49 and up
Eliminate N20/N26 Timing Chain Woes with Our Comprehensive Kit – Get Your BMW Back on Track!
Burger Motorsports Performance Intake - Blue Filter - F22 F87 2 Serie...
Not for sale or use in the state of California. For vehicles equipped with an automatic transmission only.
Burger Motorsports - Corporate Logo
T#:556781
Part#: BMS-F3X-N55-INT
In Stock
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

  • Adds up to 10+ Horsepower
  • Dramatic sound improvement
  • Super fast install and removal
  • Improves throttle response 
  • Retains OEM airbox base as a heat shield
  • Retains OEM cold air ducting
  • Looks great under the hood
  • Cleanable and reusable filter
  • Made in the USA
Show More Show Less

Zimmermann Front And Rear Brake Service Kit - F22 / F30 / F32 ...
For vehicles with standard brakes.
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23847537
Part#: F&RSRVBRKKITKT
In Stock
Sale - Save 24% $ 601.99

This product was last offered at the strikethrough price on
04-08-2026

$ 459.97 USD
Sale - Save 24%
$ 601.99

This product was last offered at the strikethrough price on
04-08-2026

$ 459.97 USD

Ensure a seamless front and rear brake service with Turner Motorsport's all-in-one kit. This comprehensive brake service package simplifies the process by offering rotors, pads, sensors, assembly grease, and a complete set of set screws for easy brake replacement. Crafted by experts, this matched kit ensures optimal performance and harmony among all brake components.

Included components:

  • Front and rear Zimmermann rotors
  • Front and rear Textar pads
  • Front and rear pad wear sensors
  • Rotor set screws
  • 4 AGS Syl-Glide Silicone Brake lubricant packets

Turner Motorsport houses an extensive collection of premium brake components, encompassing hoses, hard lines, fluids, hardware, and high-temperature lubricants. Find everything essential for a professional-grade brake service at Turner Motorsport.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:22130470
Part#: B58IGNSERVKT
In Stock
Sale - Save 19% $ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 342.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.10 USD
Free Shipping on orders $49 and up
Malfunctioning ignition coils or spark plugs can lead to issues like sputtering, rough idling, acceleration hesitation, misfires, and the illumination of the check engine light. If one of your ignition coils is faulty, it's a wise move to replace the spark plugs as well, preventing potential future problems, especially in cases of corroded or rusted connections. This kit showcases the innovative Bav Auto Performance Ignition Coils, equipped with core windings modified to enhance firepower and facilitate a faster, more efficient combustion process. It's an excellent choice for tuned or modified vehicles! The kit includes: 6 NGK 94201 Spark Plugs 6 Bav Auto Performance Ignition Coils AGS dielectric grease Spark Plug Service Indicator Label In need of a 12-Point spark plug socket? We recommend the Schwaben Magnetic Spark Plug Socket, part number ES2561145. Elevate your vehicle's performance with Turner Motorsport.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
Ships in 4 Business Days
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less
N20 Timing Chain Rebuild Kit - F22/23 F3X N20 2.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23913961
Part#: N20TMGKT
Ships in 5 Business Days
Sale - Save 8% $ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 357.74 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 387.41

This product was last offered at the strikethrough price on
05-03-2026

$ 357.74 USD
Free Shipping on orders $49 and up
Contains all the required components for the replacement of your N20 engine's timing chain. Kit includes: All required Gaskets and seals Camshaft timing chain tensioners with retaining clips Timing chain tensioner for crankshaft to camshaft with sealing washer Timing chain guide rails Timing chain 2 Gallons BMW coolant Replacement oil filter with associated o-ring. 6 quarts BMW High Performance 5w30 Synthetic oil
Show More Show Less

Valve Cover kit - F22/23 F3X F87 N55 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23913948
Part#: F3XN55VCKT
In Stock
Sale - Save 24% $ 292.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.72 USD
Sale - Save 24%
$ 292.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.72 USD
If your valve cover has become cracked or warped, replace it with this quality Bavarian Autosport cover to prevent leaks and further valvetrain damage. This kit includes everything needed to install a new valve cover, including a new CCV hose, gaskets, and hardware!
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less
Turner BMW 12.5mm Wheel Spacers (Pair) - Big Pad
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:6181666
Part#: TWHF9905F13T
In Stock
Sale - Save 5% $ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
Sale - Save 5%
$ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
12.5MM (.49 inch) Big Pad Wheel Spacers for BMW E70 X5M, E71 X6/X6M, F02, F06, F07, F10, F12/F13, F22, F25, F3X, F8X M3/M4 These are our Big Pad wheel spacers designed for the latest generation of factory BMW wheels. The "wheel pad" is the back of the wheel that mounts to the hub on the car. Since the early 2000s the factory BMW wheel pad diameter has grown - 150mm, 152mm, 154mm, and now 156mm. Most of the wheel spacers on the market are 152mm. The difference from using the smaller spacer on a large pad will leave an unsightly step down between the back of the wheel and the brake rotor hat (see image). To fix this visual defect we use a larger diameter spacer - the Big Pad. This will have less of a step, or no step at all, when used with the larger pad size. Note that nearly all aftermarket wheel manufacturers use the smaller pad size (mainly to reduce unsprung weight). For more information on wheel pad sizes and their effects on fitment and strength, click to our spacers FAQ page. Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features hub-centric design with hub-centric lip precise tolerance fitment thanks to CAD process and CNC mill machine large pad surface area - 156mm vs standard 150mm aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Wheel Spacer Tech & FAQ Important Note: It is vital that you measure the depth of your hub lip. The depth of the lip must not exceed the thickness of the spacer. This is critical on newer chassis cars that have deeper hubs than older models. For examples and tips on measuring, check out our How To Measure for Spacers page. Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: large Extended Wheel Bolts Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing. This item fits the following BMWs: Front or Rear 2014+ F22 BMW 228i 228iX M235i M235iX 2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 2012+ F31 BMW 328i 328iX - Wagon 2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 2014+ F33 BMW 428i 428iX 435i 435iX - Convertible 2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe 2015+ F80 BMW M3 2015+ F82 BMW M4 2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT 2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5 2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive M6 2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe 2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li 2011+ F25 BMW X3 xDrive28i X3 xDrive35i Rear Only 2007-2013 E70 BMW 2007-2014 E71 BMW
Show More Show Less
70c Low Temp Oil Thermostat Kit - N54/N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:30031507
Part#: N54N55LTKT1
Back Ordered
Sale - Save 18% $ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 152.97

This product was last offered at the strikethrough price on
05-03-2026

$ 125.58 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less


Liqui Moly Special Tec LL-01 FE 0w-30 Oil Change Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52516245
Part#: 83212365950KT1
In Stock
New Item
Sale - Save 3% $ 106.99

This product was last offered at the strikethrough price on
08-31-2026

$ 103.71 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 106.99

This product was last offered at the strikethrough price on
08-31-2026

$ 103.71 USD
Free Shipping on orders $49 and up
N20 2.0L Genuine BMW Oil Change Kit / Inspection I
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:22130468
Part#: GENUOILCHGIN1KT
In Stock
Sale - Save 3% $ 114.99

This product was last offered at the strikethrough price on
08-31-2026

$ 111.75 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 114.99

This product was last offered at the strikethrough price on
08-31-2026

$ 111.75 USD
Free Shipping on orders $49 and up
To maintain your driving machine's peak performance, regular maintenance is crucial. BMW's recommended oil change interval varies depending on your driving habits. We suggest changing your oil no later than every 10,000 miles. For those with a more aggressive or city driving style, a 5,000-mile oil service interval is preferable. This kit includes: Six Quarts of BMW Synthetic Engine Oil - 0W-20 Engine Oil Filter Oil Drain Plug Gasket (included with the filter kit) Ensure your BMW operates flawlessly with this high-quality service kit from Turner Motorsport.
Show More Show Less