BMW Suspension Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

SPL Parts - Corporate Logo
T#:587646
Part#: SPL-RTR-F3X
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping
SPL Parts TITANIUM Series Rear Traction Links (RTR) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches.
Powerflex Black Series - Corporate Logo
T#:555041
Part#: PFF5-4102X2B
Ships in 2 Business Days
$ 106.99 USD
Free Shipping
$ 106.99 USD
Free Shipping
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings. Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Show More Show Less
034Motorsport - Corporate Logo
T#:25341452
Part#: 034-402-Z040
In Stock
$ 27.00 USD
Free Shipping
$ 27.00 USD
Free Shipping
This is a rebuilt kit for 034Motorsport's Dynamic+ Adjustable E9x BMW Front Sway Bars. This kit can be used to rebuild the following Sway Bar (034-402-1024)

Air Lift - Corporate Logo
T#:25109074
Part#: 27791
Ships in 5 Business Days
$ 2,948.99 USD
Free Shipping
$ 2,948.99 USD
Free Shipping
We asked ourselves: what would the ultimate air suspension be like? How would it combine an easy-to-use, reliable, and feature-rich system with powerful technology and beautiful design? Air Lift Performance 3H is the result of three years of development and testing. It is the most advanced product we have ever created. Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems - instantly improving suspension control, performance, and vehicle ride flexibility.
Show More Show Less

Air Lift - Corporate Logo
T#:384245
Part#: 27705
In Stock at Vendor
$ 795.00 USD
Free Shipping
$ 795.00 USD
Free Shipping
BMW's performance with the Air Lift 3H Upgrade, is designed to enhance your existing 3P system. This convenient kit includes four height sensors along with all the necessary wiring and mounting hardware for a seamless installation. Key Features: Four height sensors for precise height control. Comprehensive wiring and mounting hardware included. Elevate your BMW's suspension to new heights of performance and control.
Show More Show Less
Air Lift - Corporate Logo
T#:384244
Part#: 27680
In Stock at Vendor
$ 1,932.69

This product was last offered at the strikethrough price on
08-02-2026

$ 1,407.50 USD
Free Shipping
$ 1,407.50 USD
Free Shipping

Air Lift proudly introduces the revolutionary Air Lift Performance 3P pressure-based air suspension control system after three years of extensive development and testing. This system represents the pinnacle of their innovation.

Air Lift Performance 3P amalgamates pressure-based control with optional ride-height sensing technology, leveraging the advantages of both systems to instantly enhance suspension control, performance, and ride flexibility.

Key Specifications:

  • Controller: Features a vibrant TFT color display with adjustable backlight, illuminated preset buttons, and full-color indicators for tank pressure, 4-corner active height, and pressure readings. It's encased in a black anodized CNC machined case, allowing customized mounting options with a Micro-USB port for power.
  • Mobile App: Works seamlessly with the free mobile app, enabling Bluetooth-based ride height and system settings adjustments. Additionally, the app facilitates direct system software updates to the manifold and controller.

Kit Features:

  • Pressure-based 1/4" Manifold
  • Black Anodized Aluminum Display
Show More Show Less

Air Lift - Corporate Logo
T#:384243
Part#: 27695
In Stock at Vendor
$ 2,578.99 USD
Free Shipping
$ 2,578.99 USD
Free Shipping

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

  • Combines pressure-based control with ride-height sensing technology for enhanced performance
  • Features a brilliant TFT color display for intuitive control and monitoring
  • Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
  • State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
  • Improved height sensor arm design for increased durability and longevity
  • Show mode feature enables height management while the vehicle is off

Kit Features:

  • Height + Pressure 3/8" Manifold
  • Air Lift Black Anodized Aluminum Display
  • Fully Integrated Wiring Harness That Also Incorporates Compressor Power
  • Necessary Fittings, Hardware, and Connectors For a Complete Install
  • Air Lift Automatically Draining Water Trap
  • 60ft of 3/8" Air Line
  • 3H Includes Rotational Height Sensors, Wiring, and Linkages
  • FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available
Show More Show Less
H&R - Corporate Logo
T#:578065
Part#: 72878-2
Back Ordered
10% off MSRP $ 789.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 710.99 USD
Free Shipping
10% off MSRP
$ 789.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 710.99 USD
Free Shipping
28mm font bar with 20mm Rear bar; bushings included. Reduces body roll Highest tensile strength available H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.
Show More Show Less

Sachs - Corporate Logo
T#:5042228
Part#: 315870KT
Ships in 3 Business Days
$ 565.99 USD
Free Shipping
$ 565.99 USD
Free Shipping
Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. Replace your shocks to restore your ride comfort and performance. A bumpy ride or a suspension that bottoms out over even small bumps are indications that your suspension has reached the end of its life. If your ride is bouncy, it is also likely that the dampers have failed. Restore the ride quality in your BMW with this new shock absorber kit.
Show More Show Less

F22/F23 228xi/230xi B4 Front Strut - Left
For vehicles with sport suspension and without EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:598676
Part#: 22-240583
Ships in 4 Business Days
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality. Key Features and Benefits: Constant damping characteristics under any load Consistent performance and handling give the vehicle a new car feel every time Proven BILSTEIN gas pressure technology High OEM quality standards Limited lifetime warranty* *Bilstein warrants to the original retail purchaser that, for the life of each Gas Pressure Shock, this product shall be free from defects in material and workmanship. Proof of purchase is required process warranty.
Show More Show Less
Dinan Performance Spring Set - BMW F22 228i 230i, F32 428i 430i RWD ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:393819
Part#: D100-0928
Back Ordered
Sale - Save 10% $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.95 USD
Free Shipping
Sale - Save 10%
$ 349.99

This product was last offered at the strikethrough price on
09-27-2026

$ 314.95 USD
Free Shipping
Dinan's Performance Spring set for the F22 228i/230i (RWD) and F32 428i/430i (RWD) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicles by at least 1/2" (drop varies by application) for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The substantial increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph up to the top speed of the vehicle.
Show More Show Less
Lemforder - Corporate Logo
T#:594848
Part#: 33326867540
Ships in 2 Business Days
$ 165.07

This product was last offered at the strikethrough price on
07-23-2026

$ 149.65 USD
Free Shipping
$ 149.65 USD
Free Shipping


Genuine BMW - Corporate Logo
T#:22774
Part#: 31126852991
Ships in 1-2 days
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping


Genuine BMW Wishbone, Left -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Genuine BMW - Corporate Logo
T#:550046
Part#: 33316880637
Ships in 1-2 days
13% off MSRP $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping
13% off MSRP
$ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:187425
Part#: 31106857329
Ships in 1-2 days
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping


Genuine BMW Wishbone, Left -
This item fits the following BMW Chassis:
F22


Genuine BMW - Corporate Logo
T#:54262
Part#: 31126855743
Ships in 1-2 days
9% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping
9% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping


Genuine BMW Hydrobearing -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36


Genuine BMW - Corporate Logo
T#:54258
Part#: 31126854724
In Stock
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


Genuine BMW Tension Strut With Hydraulic Mount,Right -
This item fits the following BMW Chassis:
F30,F31,F32,F33,F36

 

Show More Show Less
Genuine BMW - Corporate Logo
T#:189884
Part#: 37116865540
Ships in 1-2 days
9% off MSRP $ 612.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 558.99 USD
Free Shipping
9% off MSRP
$ 612.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 558.99 USD
Free Shipping


Genuine BMW Front Right Spring Strut -
This item fits the following BMW Chassis:
F22


Genuine BMW - Corporate Logo
T#:202173
Part#: 22116857560
Ships in 1-2 days
1% off MSRP $ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping
1% off MSRP
$ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping


Genuine BMW Engine Supporting Bracket, Right -
This item fits the following BMW Chassis:
F30,F31,F32,F33,F34,F36

Genuine BMW - Corporate Logo
T#:22775
Part#: 31126852992
Ships in 1-2 days
8% off MSRP $ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping
8% off MSRP
$ 245.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 225.99 USD
Free Shipping


Genuine BMW Wishbone, Right -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36


Genuine BMW - Corporate Logo
T#:555696
Part#: 31122284529KT
Ships in 1-2 days
$ 603.99 USD
Free Shipping
$ 603.99 USD
Free Shipping

Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort.

One item to replace is the control arm. After years of service, the non-serviceable ball joints and other components can begin to wear out causing the steering to not feel as tight, as well as steering wobble and clunking when turning.

This kit is an upgrade for non-M cars, adding 0.5 degrees of camber to the front, and replacing your headlight sensors with the proper BMW parts to complete the upgrade.

Show More Show Less

Genuine BMW - Corporate Logo
T#:542670
Part#: 22116883144
Ships in 1-2 days
$ 217.99 USD
Free Shipping
$ 217.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:174559
Part#: 22116784823
Ships in 1-2 days
1% off MSRP $ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping
1% off MSRP
$ 174.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping


Genuine BMW Engine Supporting Bracket, Left -
This item fits the following BMW Chassis:
F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Bilstein B4 DampTronic OE Replacement Shock & Strut Kit - F22/23 F3X ...
For vehicles with EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:5042230
Part#: 23-266469KT
Ships in 3 Business Days
$ 2,029.99

This product was last offered at the strikethrough price on
07-29-2026

$ 1,756.00 USD
Free Shipping
$ 1,756.00 USD
Free Shipping
Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!
Show More Show Less


Bilstein B6 DampTronic Performance Shocks & Struts Kit - F22/23 xDriv...
For vehicles with Standard suspension and with EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:5042245
Part#: 23-266483KT
Ships on Dec 24, 2026
$ 2,116.00 USD
Free Shipping
$ 2,116.00 USD
Free Shipping
Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. ​The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following vehicles: BMW 228i xDrive 2016-2015, 230i xDrive 2021-2017, 328d xDrive 2018-2014, 328i GT xDrive 2016-2014 328i xDrive 2016-2013, 330i GT xDrive 2019-2017, 330i xDrive 2018-2017, 335i GT xDrive 2016-2014, 335i xDrive 2015-2013 340i GT xDrive 2019-2017, 340i xDrive 2018-2016, 428i xDrive 2016-2014, 428i xDrive Gran Coupe 2016-2015 430i xDrive 2020-2017, 430i xDrive Gran Coupe 2020-2017, 435i xDrive 2016-2014, 435i xDrive Gran Coupe 2016-2015 440i xDrive 2020-2017, 440i xDrive Gran Coupe 2020-2017, ActiveHybrid 3 2014, M235i xDrive 2016-2015 ​M240i xDrive 2018-2017, M240i xDrive 2021-2020
Show More Show Less
KMAC - Corporate Logo
T#:389642
Part#: 192616-2N
Special Order: No Guaranteed ETA
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping

Location: Front
Type: Street/Track, Stage 2
Upper spring perch: OEM-size, 60mm, and 2.5" included
Bearings: urethane OEM-type center bushing; lubricated radial thrust bearing on spring perch

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

KMAC camber kits are the most complete kits on the market, with all of the common spring perch options and strut hardware included. The OEM size spring perch as well as 60mm and 2.5" spring isolators are included which makes it easy to upgrade from stock struts to coil overs without having to buy new camber plates. Or swap springs on your coil overs between 60mm and 2.5" without buying additional upper perches. Also included are the most common strut pin hardware - 14mm lower bearing adapters and 12x1.5, 12x1.75, and 14x1.5 top nuts. This takes the guesswork out of ordering the correct hardware for your strut type. The urethane main bushing is also replaceable and the camber plate parts are made from 7075-grade aluminum for a lifetime of camber plate use.

Fitment Note 1: replaces factory BMW strut mount with 3 mounting bolts (up to 12/2014 prodution). Not for cars with 5-bolt strut mounts.

Fitment Note 2: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-MAC includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. Basic instructions are included but professional installation is required. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
-12/2014  F22 BMW  228i 228i xDrive M235i M235i xDrive
2012-12/2014  F30 BMW  320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013-12/2014  F31 BMW  328i xDrive 328d xDrive - Wagon
-12/2014  F34 BMW  328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013-12/2014  F32 BMW  428i 428i xDrive 435i 435i xDrive - Coupe
2013-12/2014  F33 BMW  428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
-12/2014  F36 BMW  428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
Not for cars with Adaptive M Suspension option code S2VFA
Show More Show Less
KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less

Koni Special Active Shocks and Struts, Full Set - F3X RWD, F22 ...
For vehicles with M Sport suspension and without EDC
Koni - Corporate Logo
T#:555145
Part#: 87451356KT
In Stock at Vendor
$ 989.99 USD
Free Shipping
$ 989.99 USD
Free Shipping

Koni suspension has taken their long running FSD (Frequency Selective Dampening) Technology and improved upon it to create their new Special Active suspension package. Improving handling while also improving the comfort of your BMW's ride, Special Active shocks and struts prove they are a top contender in the replacement suspension market.

Koni's Special Active dampers adapt to the continuous imperfect road conditions in order to provide you with a more responsive and smoother ride. Thanks to multiple generations of suspension expertise, these shocks and struts rival expensive ride control systems of newer vehicles but at a cost that is significantly lower and a capability to be retrofitted into existing vehicles.

Designed by Koni for the vehicle's original stock ride height, these are not intended to be used with lowering springs and will perform best when paired with stock springs.

Koni Special Active Features:

  • KONI’s latest generation of Frequency Selective Damping Technology
  •  Improves safety and road holding
  •  Technology proven on over 1.5 million factory equipped vehicles
  •  Secure and stable feeling for spirited driving
  •  Unrivaled aftermarket solution can be fitted to most new and older cars
  •  Driving refinement for cars, trucks, SUVs, etc.
  •  Technology that rivals expensive Original Equipment electronic systems
  •  Performance for driver and comfort for passengers in one

Activate your Koni Rebate!

Fits the following BMWs:
2011-2018 F30 BMW RWD with M Sport suspension
2011-2018 F32/6 BMW RWD with M Sport suspension
2014-2018 F22 BMW with M Sport suspension

Show More Show Less

KONI Yellow Sport Adjustable Shocks & Struts, Rear Set - F22 F30 F32 ...
For vehicles without EDC
For vehicles without EDC
Koni - Corporate Logo
T#:380543
Part#: 8240-1294SPORTKT
Ships in 6 Business Days
$ 354.99 USD
Free Shipping
$ 354.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty
     

 

Activate your Koni Rebate!

 

This item fits the following BMWs:
2014+ F22 BMW 228i M235i 
2012+ F30 BMW 320i 328d 328i 335i - Sedan
2013+ F32 BMW 428i 435i - Coupe
Not for cars with Electronic Damping Control (EDC)

Show More Show Less
Bilstein B6 Performance DampTronic Shock & Strut Package - BMW F22 22...
For vehicles with Electronic (EDC) Suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:5028779
Part#: 23-250727KT
Ships on Dec 24, 2026
$ 2,116.00 USD
Free Shipping
$ 2,116.00 USD
Free Shipping
Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B6 Performance shocks and 2 rear Bilstein B6 Performance shocks. Includes top nuts and rear lower shock washers. The stock rear dust boots are re-used. ​The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following vehicles: BMW 228i 2016-2014, 230i 2021-2017, 328d 2018-2014, 328i 2016-2012, 330i 2018-2017, 335i 2015-2012 340i 2018-2016, 428i 2016-2014, 428i Gran Coupe 2016-2015, 430i 2020-2017, 430i Gran Coupe 2020-2017 435i 2016-2014, 435i Gran Coupe 2016-2015, 440i 2020-2017, 440i Gran Coupe 2020-2017, ActiveHybrid 3 2015 M235i 2016-2014, M240i 2021-2017
Show More Show Less

Turner Motorsport - Corporate Logo
T#:599087
Part#: 023579TMS09KT1
Ships in 1 day
$ 981.99

This product was last offered at the strikethrough price on
06-14-2026

$ 887.99 USD
Free Shipping
$ 887.99 USD
Free Shipping
The sway bars are constructed by KW, made of lightweight 1.25” (32mm) OD, 0.120” (3mm) wall DOM tubular steel, for the greatest durability and rigidness possible. Finished in a blue powder coat for maximum corrosion resistance. The Sway Bars also come kitted with 80A Poly Sway Bar Bushing bushings from Energy Suspension, along with black anodized 6061-T6 billet brackets with check valve grease ports, and finally 4 new Genuine BMW nuts to install it all. When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! Adjustment Range:11.4"-12.9"
Show More Show Less
Turner Motorsport Adjustable 32mm Front Sway Bar - F22/F30/F32 ...
10X Entries Into Our F80 M3 Sweepstakes
Does Not Fit xDrive Models
Turner Motorsport - Corporate Logo
T#:590910
Part#: 023579TMS09KT
Ships in 1 day
$ 601.99

This product was last offered at the strikethrough price on
06-14-2026

$ 524.99 USD
Free Shipping
$ 524.99 USD
Free Shipping
Reduce Understeer & Body Roll with our Adjsutable 32mm Front Sway Bar Kit. Everything you need to upgrade your front Sway Bar! Includes Turner Front 32mm Sway Bar (Manufactured BY KW Suspension), Custom 80A Grease-able Poly Sway Bar Bushings (Made by Energy Suspension), & Billet Sway Bar Brackets with grease port and dust cap.
Show More Show Less

Turner Motorsport Adjustable Front/Rear 32/22mm Sway Bar Upgrade Kit ...
10X Entries Into Our F80 M3 Sweepstakes
Does Not Fit xDrive Models
Turner Motorsport - Corporate Logo
T#:555391
Part#: 023579TMS06
Ships on Dec 8, 2026
$ 997.99 USD
Free Shipping
$ 997.99 USD
Free Shipping
Reduce body roll and under-steering with the Turner Front/Rear Upgraded Sway bar kit!

Turner Motorsport - Corporate Logo
T#:340477
Part#: TSU998062A
Ships on Feb 5, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:340476
Part#: TSU9980548
Ships on Feb 5, 2027
Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
Sale - Save 25%
$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD
Free Shipping
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Front Lower Left Control Arm - F30,F31,F32,F33,F34,F36 xDrive models ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:4934922
Part#: 3160500201
Back Ordered
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars. We only offer parts we know you can trust to perform
Show More Show Less


F22/F23 228xi/230xi B4 Front Strut - Right
For vehicles with sport suspension and without EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:598678
Part#: 22-240590
Special Order: No Guaranteed ETA
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:5471052
Part#: 00501TMS011
Ships on Feb 8, 2027
Sale - Save 3% $ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 473.35 USD
Free Shipping
Sale - Save 3%
$ 487.99

This product was last offered at the strikethrough price on
06-14-2026

$ 473.35 USD
Free Shipping
The stock Genuine BMW rear toe links (33326792533) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Toe Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
F22, F3X Dinan Monoball Front Thrust Arm Bushings (Pair)
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389095
Part#: D280-0014
Ships in 6 Business Days
Sale - Save 10% $ 425.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 383.36 USD
Free Shipping
Sale - Save 10%
$ 425.99

This product was last offered at the strikethrough price on
09-27-2026

$ 383.36 USD
Free Shipping

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an F22 2-series or F3X 3/4-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F34 BMW 328i 335i - Gran Turismo
2012+ F36 BMW 428i 435i - GranCoupe

Show More Show Less

B4 Front DampTronic Suspension Strut Assembly - Right
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with EDC
Bilstein - Corporate Logo
T#:598577
Part#: 23-238923
Special Order: No Guaranteed ETA
$ 629.00 USD
Free Shipping
$ 629.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less

Hotchkis - Corporate Logo
T#:555462
Part#: 25840F
Back Ordered
$ 260.99 USD
Free Shipping
$ 260.99 USD
Free Shipping

Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links. 

Product Features:

  • Designed for the BMW F22/23 & F3X.
  • Length adjustable for optimum fit (+/- .5" from stock length)
  • Replaces weak factory end links
  • Direct replacement
  • THK resin ball studs
  • Waterproof, protective seals
  • CNC Machined Center Sections with wrench flats
  • Left and right hand threads
  • Durable gold zinc coated

Fits the following BMW's:
2012+ F3X BMW All Submodels
2014+ F22/23 BMW All Submodels

Show More Show Less
Rear Isolators
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:638042
Part#: 006012LA04
Special Order: No Guaranteed ETA
Sale - Save 5% $ 76.99

This product was last offered at the strikethrough price on
06-14-2026

$ 73.14 USD
Free Shipping
Sale - Save 5%
$ 76.99

This product was last offered at the strikethrough price on
06-14-2026

$ 73.14 USD
Free Shipping

Megan Racing - Corporate Logo
T#:381349
Part#: MRSBM0320
Back Ordered
$ 155.00 USD
Free Shipping
$ 155.00 USD
Free Shipping

BMW F30 Adjustable Rear Camber Front Upper Arms Performance provide a superior solution for optimizing alignment on lowered vehicles. Unlike factory camber adjustment, which uses eccentric bolts allowing for minimal adjustment, these performance upper arms from Turner Motorsport offer extensive adjustability to achieve ideal alignment settings.

  • Enhanced Adjustability: Allows for precise camber adjustments beyond the limitations of factory eccentric bolts, ideal for performance and handling improvements.
  • High-Strength Steel Alloys: Constructed from durable yet lightweight materials for increased strength and longevity.
  • Track-Tested Performance: Rigorously tested in road racing, autocross, and drifting to ensure reliability and effectiveness.
  • Perfect for Lowered Vehicles: Addresses alignment issues commonly found in lowered cars, providing better handling and tire wear.

Upgrade your BMW F30 with Turner Motorsport's Adjustable Rear Camber Front Upper Arms for enhanced performance and alignment precision.

Show More Show Less
F22, F3X RWD Dinan Adjustable Sway Bar Set
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389105
Part#: D120-0585
Ships in 5 Business Days
Sale - Save 10% $ 949.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 854.96 USD
Free Shipping
Sale - Save 10%
$ 949.99

This product was last offered at the strikethrough price on
09-27-2026

$ 854.96 USD
Free Shipping

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan F3X Sway Bar Specs:
F: 28mm, hollow, 3-position adjustable, urethane bushings and brackets included
R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F36 BMW 428i 435i - GranCoupe

Show More Show Less

B4 Front Strut Assembly - Priced Each
For vehicles with sport suspension and without EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344712
Part#: 22-218001
Special Order: No Guaranteed ETA
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less

CONTROL UNIT FOR VDC
For Vehicles with VDC
Genuine BMW - Corporate Logo
T#:7403167
Part#: 37148833308
Ships in 1-2 days
4% off MSRP $ 1,115.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,065.99 USD
Free Shipping
4% off MSRP
$ 1,115.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,065.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:60429
Part#: 33326792533
Ships in 1-2 days
8% off MSRP $ 111.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping
8% off MSRP
$ 111.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 101.99 USD
Free Shipping


Genuine BMW Track Strut With Rubber Mount -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Front Tension Strut - Left
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle HD - Corporate Logo
T#:5175748
Part#: 31126855741
Ships in 2 Business Days
$ 189.99

This product was last offered at the strikethrough price on
05-07-2026

$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping